Lower Row (10-Digit 7-Segment Numeric Display); Display Indicator - TEC MA-1535 series Owner's Manual

5. DISPLAY

5.2 Lower Row (10-digit 7-segment Numeric Display)

(1) Numeric Display
AMOUNT Displays the numeric data, such as amount, quantity, etc.
When the amount is negative, the symbol " − " is displayed as well.
(9 digits)
RPT (2 digits) Displays the repeat count of the same Department or PLU item.

5.3 Display Indicator

Receipt OFF
Low Battery
SIGN ON
Receipt OFF This lamp turns on when the Receipt-OFF mode is declared by the
[LOG/RECEIPT] key. In this condition, no receipts will be issued for a sale to be
entered. It goes out by depressing the [LOG/RECEIPT] key again for Receipt-ON
mode.
Low Battery This lamp turns on when the voltage of the ECR's backup battery voltage is
dropping. When this lamp lights, please contact your nearest TOSHIBA TEC
representative as the programming data and sales data are backed up by this
battery.
SIGN ON This lamp turns lit only when the Cashier Code Entry method is selected. It lights
up when a cashier has signed ON. It goes out when the cashier has signed OFF,
and the message "LOG" is displayed in the Upper Row instead.
Hold This lamp turns on when the operation is held by pressing the [HOLD/RECALL]
key. (Receipt-OFF mode only)
Cashier Interrupt This lamp turns on when the transaction is interrupted by another cashier.
(Receipt-OFF mode only)
Price Level 2 This lamp turns lit when the 2
PLU's 1
[PRICE 3] key.
Price Level 3 This lamp turns lit when the 3
Price Shift This lamp turns on when 2
Indicates that the sale is finalized and the displayed amount is the sale total.
Indicates that the sale is finalized with an amount tendered and the displayed
amount is the change due.
When a Void, Amount Discount, Percent Discount, or Returned Merchandise item
has been entered, the Negative Mark is displayed. The mark is also displayed
when the subtotal or sale total is obtained and the amount is negative.
Indicates when the Tendered Amount is less than Subtotal (Short Tender).
st rd
to 3 prices are selected by pressing the [PRICE 1], [PRICE 2] or
nd
5.2 Lower Row (10-digit 7-segment Numeric Display)
PL2 PL3 SHIFT
Hold/Cashier Interrupt
nd
price of the PLU is selected.
rd
price of the PLU is selected.
rd
price or 3 price is selected.
5- 3
Price Shift Indicator
Price Level 3
Price Level 2
EO1-11148