TEC MA-600-1 series Owner's Manual page 179

4. PROGRAMMING OPERATIONS
Type 3: % Rate only
2) Operation Flowchart
3) Example
Tax3 table below is set.
10% is applied to any sale amount.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
three times.
Depress the [4] or [Enter] key.
Depress the [↓] key twice.
Depress the [3] or [Enter] key.
Depress the [↓] key twice.
Main Menu
"4 RATE, LIMIT
AMOUNT" is selected.
"3 TAX TABLE" is
selected.
Input 3.
[Enter]
Input a tax rate.
[End]
LCD Display
(continued on the next page)
4-56
4.16 Tax Table Programming
ECR is being outside a sale and in SET mode.
Depress [↓] three times then [Enter].
Or Depress [4].
Depress [↓] twice then [Enter].
Or Depress [3].
3: RATE (% rate only)
RATE is selected.
Tax rate is entered.
(0.0001% to 99.9999%:
Use the [.] key if a decimal portion is contained.
The fraction of the amount resulting from this %
rate calculation will be rounded off.)
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Remarks
The cursor is moved on to "4 RATE, LIMIT
AMOUNT".
"4 RATE, LIMIT AMOUNT" is selected.
The cursor is moved on to "3 TAX TABLE".
"3 TAX TABLE" is selected.
Tax type which has already been
programmed is displayed.
EO1-11155