Store Name Message Programming - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.5

Store Name Message Programming

A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is
programmed here. This programming is possible only when the store message specification has been selected
by the program option, however, it is not possible when the logo message has been selected.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
*: To program a message in a
desired line, move the cursor
there with the [↓] key then
depress the [Enter] key.
Main Menu
"1 MESSAGES" is
selected.
"3 STORE MESSAGE" is
selected.
*
[Enter]
Input a message in the
1st line.
[Enter]
[Enter]
Input a message in the
2nd line.
[Enter]
[Enter]
Input a message in the
3rd line.
[Enter]
[Enter]
Input a message in the
4th line.
[Enter]
[End]
4-15

4.5 Store Name Message Programming

ECR is being outside a sale and in SET mode.
Depress [1] or [Enter] key.
Depress [3] or [Enter] key.
The ECR enters the 1st line input mode.
A maximum of 32 one-byte or 16 two-byte
characters are input.
The 1st line message is entered and the
programmed data is printed.
The ECR enters the 2nd line input mode.
A maximum of 32 one-byte or 16 two-byte
characters are input.
The 2nd line message is entered and the
programmed data is printed.
The ECR enters the 3rd line input mode.
A maximum of 32 one-byte or 16 two-byte
characters are input.
The 3rd line message is entered and the
programmed data is printed.
The ECR enters the 4th line input mode.
A maximum of 32 one-byte or 16 two-byte
characters are input.
The 4th line message is entered and the
programmed data is printed.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
EO1-11155