Department Preset Price Setting Or Changing - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.14

Department Preset Price Setting or Changing

The preset price of each department may be set in the DEPARTMENT TABLE PROGRAMMING already
described. However, in setting or changing the price only but not other programmed data, the following operation
will be more convenient.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: When inputting 0 then depressing the [Enter] key, a zero price will be set to the department. If none of
unit price value is input then the [Enter] key is depressed, the department will be open (i.e. open-price
department).
Main Menu
"3 DP/PLU" is
selected.
"1 DP" is selected.
"2 UNIT PRICE" is
selected.
Select a department
of which unit price is
to be programmed.
Input a unit price
value (max. 6 digits).
[Enter]
[End]
4-45

4.14 Department Preset Price Setting or Changing

ECR is being outside a sale and in SET mode.
Depress [↓] twice then [Enter].
Or Depress [3].
Depress [1] or [Enter] key.
Depress [↓] then [Enter].
Or Depress [2].
Select a department of which unit price is to be
programmed with the [↑] or [↓] key.
See NOTE below.
The department preset price is entered and
printed.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
EO1-11155