TEC MA-600-1 series Owner's Manual page 119

3. READ (X) AND RESET (Z) REPORTS
(4) Change Batch Number
A close batch command is sent to the EFT terminal.
Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.
Example
• Operation: Mode Lock:
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
10-20-2006 FRI #3001
CHANGE BATCH
9999 07:34TM
Z for reset (reset only)
When the ECR is being outside a sale and in Z mode, depress the
[↓] key twice to select "3 EFT(BATCH)". And depress the [3] or
[Enter] key.
Depress the [↓] key three times to select "4 CHANGE BATCH NO."
and depress the [4] or [Enter] key.
Input a maximum of 4-digit batch No. which was specified by the
hosting company, and then depress the [AT/TL] key.
9999
The changed batch No. is printed.
3-22
EO1-11155
3.2 General Notes On Report Takings