Department Group Name Programming - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.11

Department Group Name Programming

In this operation, the name of each Department Group is programmed. Which Departments are linked to each
Group has been set in the DEPARTMENT TABLE PROGRAMMING operation. A maximum of 15 department
groups can be set.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of both
types is also available.
Main Menu
"2 NAMES" is
selected.
"2 DP GROUP NAME" is
selected.
Select a Department Group
to be programmed.
[Enter]
Input a Department
Group Name.
[Enter]
[End]
4-33

4.11 Department Group Name Programming

ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
Or Depress [2].
Depress [↓] then [Enter].
Or Depress [2].
Select a department group of which name is to
be programmed with the [↑] or [↓] key.
The ECR enters character input mode.
A maximum of 12 one-byte or 6 two-byte
characters are input.
The Department Group Name is entered and
printed.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
EO1-11155