Combine - Kyocera TASKalfa 6501i Operation Manual

Using Various Functions > Functions

Combine

Layout/Edit
Copy
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
None
Press [2 in 1] or [4 in 1], and select the page layout from "Layout".
Item
Off
2 in 1 Layout
Border Line
Original Orientation
4 in 1 Layout
Border Line
Original Orientation
Functions
Custom
Box
Solid Line
L to R/T to B, R to L/B to T
None, Solid Line, Dotted Line,
Positioning Mark
Top Edge on Top, Top Edge on Left
Right then Down, Left then Down,
Down then Right, Down then Left
None, Solid Line, Dotted Line,
Positioning Mark
Top Edge on Top, Top Edge on Left
Dotted Line
Value
Select the page layout of scanned originals.
Select the boundary line type.
Press [Border Line] to select the page
boundary line, and press [OK].
Select the orientation of the original
document top edge to scan correct direction.
Press [Original Orientation] to choose
orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then press
[OK].
Select the page layout of scanned originals.
Select the boundary line type.
Press [Border Line] to select the page
boundary line, and press [OK].
Select the orientation of the original
document top edge to scan correct direction.
Press [Original Orientation] to choose
orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then press
[OK].
6-30
Positioning Mark
Description