Gloss Mode; Ecoprint; Selecting Ecoprint; Color - Kyocera TASKalfa 2551ci Driver Manual

Gloss Mode

EcoPrint

Selecting EcoPrint

1
2
3
4

Color

Color Reproduction

Printer Driver
Uses JPEG compression
High quality
Uses delta row compression
Gloss mode simulates high-gloss copies by adding a glossy appearance to
printed text and images.
Note: If EcoPrint is On, Gloss mode is unavailable.
EcoPrint changes toner saturation in the print job, making the entire print
image, including text and graphics, appear lighter. EcoPrint does not increase
print speed. The amount of toner varies based upon your printing system model
and the type of data printed (text, graphics, or both). EcoPrint and Gloss mode
cannot be used together.
EcoPrint is also available in the Quick Print and Basic tabs. If EcoPrint is
turned on in the Quick Print or Basic tab, the display shows the previously-
selected level in the Imaging tab. If no level is selected, the Imaging tab
selection is Medium.
You can change toner saturation in a print job.
In the Imaging tab, click the EcoPrint icons to change between on and off.
In the list, select the amount of toner you want to save.
Click OK to return to the Print dialog box.
Click OK to start printing.
Color lets you choose full-color printing or printing with black toner only.
In Imaging > Color, the following color modes are available:
Full color
This mode prints full four-color text and graphics.
Black
This mode prints with black toner only, suppressing all color settings.
Color reproduction lets you optimize the color rendering of photos and
graphics. This feature is available when Full color is selected under Color.
In Imaging > Color reproduction, the following options are available.
Printer settings
Imaging
8-7