Editing Quick Print Options; Profiles - Kyocera TASKalfa 2551ci Driver Manual

Quick Print

Editing Quick Print Options

1
2
3
4
5

Profiles

4-4
The number of available features depends on the printing system model. If a
feature, such as Staple, is added to the Quick Print tab but a finishing device is
not installed, the icon appears as unavailable. Once the device is installed and
selected in Device Settings, the icon becomes active.
Note: An administrator can hide the Edit Quick Print button by selecting
Hide Edit Quick Print control in Device Settings > Administrator. The Edit
Quick Print button is unavailable when the driver is accessed from an
application's Print dialog box.
You can select from a limited set of driver features to appear in the Quick Print
tab.
Depending on your operating system:
Windows 8 and Windows Server 2012: open the Control Panel, and then
click View devices and printers.
Windows 7 and Windows Server 2008 R2: click Start, and then click
Devices and Printers.
Windows Vista and Windows Server 2008: click Control Panel and then
click or double-click Printers.
Windows XP and Windows Server 2003: click Start > Printers and Faxes.
Right-click your printing system model, then click Printing Preferences.
Select the Quick Print tab.
Click Edit Quick Print.
To add a feature to the Quick Print tab, select the feature under Available
controls, and click the right arrow to move the feature to Selected controls.
A maximum of 5 features can appear under Selected controls.
To remove a feature from the Quick Print tab, select the feature under
Selected controls, and click the left arrow to move the feature to Available
controls. To use only the Profiles in the Quick Print tab, move all features
to Available controls.
Click the up and down arrows to change the position of the features under
Selected controls. The feature at the top appears on the left in the Quick
Print tab.
To restore the list to factory default options, click Reset.
After making your selections, click OK.
You can save printer driver settings as a profile. You can select multiple options
in the Quick Print tab and the other Printing Preferences tabs, save them to a
profile, and use all of them at once when you apply the profile. You can then use
that profile to print the same type of print job again without having to reselect all
the settings. In Printing Preferences, the Save as and Profiles buttons appear
at the bottom of all tabs.
User Guide