Removing And Installing The Cowling And Panel - Yamaha TT-R90(W) Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing the
cowling and panel
1. Panel A
2. Cowling A
The cowling and panel shown above
6
need to be removed to perform some of
the maintenance jobs described in this
chapter. Refer to this section each time
a cowling or panel needs to be re-
moved and installed.
Cowling A
To remove the cowling
1. Remove the seat. (See page 3-7.)
2. Remove the bolt, and then take the
cowling off.
EAU18740
1. Bolt
2. Cowling A
To install the cowling
1. Place the cowling in the original
position, and then install the bolt.
EAU41621
1. Projection
2. Grommet
2. Install the seat.
Panel A
To remove the panel
Remove the bolts, and then take the
panel off.
1. Panel A
2. Bolt
To install the panel
Place the panel in the original position,
and then install the bolts.
6-6
EAU19193