Chain Drive Oil - Yamaha Tmix XP500Y Owner's Manual

Table of Contents

Advertisement

1. "CD" specification
2. "ENERGY CONSERVING II"
11. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking, im-
mediately turn the engine off and
check for the cause.
12. Turn the engine off, and then
check the oil level and correct it if
necessary.
13. Reset the oil change indicator.
(See page 4-4.)
TIP
If the engine oil is changed before the
oil change indicator comes on (i.e. be-
fore the periodic oil change interval has
been reached), the indicator must be
reset after the oil change for the next
PERIODIC MAINTENANCE AND ADJUSTMENT
periodic oil change to be indicated at
1
the correct time.
2
7-15

Chain drive oil

1
2
1. Chain drive oil filler cap
2. Chain drive oil drain bolt
The chain drive oil should be changed
as follows at the intervals specified in
the periodic maintenance and lubrica-
tion chart.
1. Place the vehicle on a level sur-
face.
2. Remove panel E. (See page 7-8.)
3. Place an oil pan under the chain
drive case to collect the used oil.
4. Remove the oil filler cap and drain
bolt to drain the oil from the chain
drive case.
5. Install the chain drive oil drain bolt,
and then tighten it to the specified
EAU19996
2
3
4
5
6
7
8
9

Advertisement

Table of Contents
loading

Table of Contents