Front Brake Lever - Yamaha Tmix XP500Y Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Horn switch " "
Press this switch to sound the horn.
1
Engine stop switch "
Set this switch to "
2
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
3
or when the throttle cable is stuck.
4
Start switch " "
With the sidestand up, push this switch
5
while applying the front or rear brake to
crank the engine with the starter. See
6
page 6-1 for starting instructions prior
to starting the engine.
7
8
The engine trouble warning light will
come on when the key is turned to "ON"
9
and the start switch is pushed, but this
does not indicate a malfunction.
EAU12500

Front brake lever

EAU12660
/ "
" before starting
" to
EAU12721
1. Front brake lever
2. Brake lever position adjusting dial
3. "
4. Distance between brake lever and
handlebar grip
The front brake lever is located at the
right handlebar grip. To apply the front
brake, pull this lever toward the handle-
EAU41700
bar grip.
The front brake lever is equipped with a
position adjusting dial. To adjust the
distance between the front brake lever
and the handlebar grip, turn the adjust-
ing dial while holding the front brake le-
ver pushed away from the handlebar
grip. Make sure that the appropriate
1
2
4
3
" mark
4-9
EAU44910 setting on the adjusting dial is aligned
with the " " mark on the front brake le-
ver.