Yamaha Tmix XP500Y Owner's Manual page 25

1. V-belt replacement tripmeter
Pushing the "SELECT" button switches
the display between the odometer
mode and the tripmeter modes in the
following order:
Odo → Trip-A → Trip-B → OIL Trip →
V-BELT Trip → Odo
When approximately 3.0 L (0.79 US
gal, 0.66 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "F Trip" and start counting the
distance traveled from that point. In that
case, pushing the "SELECT" button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
Odo → F Trip → Trip-A → Trip-B → OIL
INSTRUMENT AND CONTROL FUNCTIONS
Trip → V-BELT Trip → Odo
1
1
1. Fuel reserve tripmeter
To reset a tripmeter, select it by push-
ing the "SELECT" button until "F Trip",
"Trip-A" or "Trip-B" is displayed. While
"F Trip", "Trip-A" or "Trip-B" is dis-
played, push the "RESET" button for at
least one second. If you do not reset
the fuel reserve tripmeter manually, it
will reset itself automatically and the
display will return to the prior mode af-
ter refueling and traveling 5 km (3 mi).
TIP
The display cannot be changed back to
"F Trip" after pushing the "RESET" but-
ton.
Oil change indicator "OIL"
1. Oil change indicator "OIL"
This indicator flashes at the initial 1000
km (600 mi), then at 5000 km (3125 mi)
and every 5000 km (3125 mi) thereafter
to indicate that the engine oil should be
changed.
After changing the engine oil, reset the
oil change indicator. To reset the oil
change indicator, select it by pushing
the "SELECT" button until "OIL Trip" is
displayed, and then push the "RESET"
button at least 1 second. When pushing
the "RESET" button, "OIL Trip" starts
flashing. While "OIL Trip" is flashing,
push the "RESET" button for at least 3
seconds.
If the engine oil is changed before the
4-6
1
2
3
4
5
6
7
8
9