Lenovo 10A2 User Manual page 90

10. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 79. Installing the hard disk drive into the bracket
11. Slide the new secondary hard disk drive into the carrier until it snaps into position.
Figure 80. Installing the secondary hard disk drive
12. Connect the signal cable and the power cable to the new secondary hard disk drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 103.
78
ThinkCentre M83, M93/p User Guide
1 , pin 2 , pin 3 ,