Lenovo 10A2 User Manual page 116

3. Press the release tab
downward until it snaps into position.
Figure 120. Pivoting the drive bay assembly downward
4. Reinstall the front bezel.
5. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover
engage the rails on the chassis. Then, push the computer cover to the front of the computer until it
snaps into position. Install the screws to secure the computer cover.
Figure 121. Installing the computer cover
104
ThinkCentre M83, M93/p User Guide
1 on the right side of the drive bay assembly and pivot the drive bay assembly