Network Settings - LG LW9422 series Owner's Manual

• Default: Click this button to restore the IP device back to original
factory settings.

Network settings

Basic
General
> MAC address: Displays the MAC address.
Port & Encryption
> Network encryption: Select the HTTP or HTTPS option for
security.
> Smart Port Setting: Select [On] to allocate a port number
automatically.
Note:
If you select [On], [UPNP Status], [External IP], [Web Port] and
[RTSP Port] options are deactivated.
> UPNP Status: When you use the router that is supported
UPnP function, you can set the port forwarding
automatically by using the [Smart Port Setting]. [UPnP
Operation and settings
Status] shows connected status of router.
> External IP: When you connect the router that is supported
UPnP function, this option is displayed. Displays the external
IP address allocated router.
> Web port: The default HTTP port number (80) can be changed
to any port within the range 1 025 to 65 535.
> RTSP port: Check RTSP port. The default port is 554. Other
ports can be selected within the range 1 025 to 65 535.
Note:
The RTSP port number should not be same with the web
port number.
ARP Ping
> Enable ARP Ping to configure IP address: Check to enable
ARP ping.
• Save: Click this button to confirm the settings.
29