Network Settings - LG LW9228 Series Owner's Manual

36 Operation and settings
»
How to set the motion detect window
1. Click the [Add] button. The motion detect window
is displayed. You can add the five windows maxi-
mum for motion detection area.
2. Set the [Sensitivity] option.
3. Click the edge or coner of the window box to
adjust the window size for motion detection.
4. Click the [Save] button to save the settings.
NOTE
• You can reset the window size. Click one of
the window edge or corner and drag & drop
to reset the motion detection area.
• Motion Detection can be activated when the
Master channel is enabled and Video codec
is set to H.264.
4

Network settings

Basic
General
› MAC address: Displays the MAC address.
Port & Encryption
› Web port: The default HTTP port number (80) can
be changed to any port within the range 1 025 to
65 535.
› RTSP port: Check RTSP port. The default port is 554.
Other ports can be selected within the range
1 025 to 65 535.
› Network encryption: Select the HTTP or HTTPS
option for security.
NOTE
The RTSP port number should not be same with
the web port number.
TTL
› TTL: This option indicates the Time-To-Live of
multicast packets. The default setting is 7, and the
allowed TTL range is from 1 to 255.
ARP Ping
› Enable ARP Ping to configure IP address: Check to
enable ARP ping.
• Save: Click this button to confirm the settings.
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol
that allows programs to manage the real-time transmission
of multimedia data, via unicast or multicast.
Master / Slave
› RTP unicast: When enabled the transmission of
the data to the specified equipment happens on a
network specifying a single address.
› RTP multicast: When enabled it reduces the
transmission load on the camera by making the
computer of the same segment network receive
the same transmission data. When multicast option
is checked then select Video Port number, Audio
Port number and Data port number.
- Video RTP port: Specify the video transmission
port number used for the multicast streaming.
It is initially set to 8 888 and you can edit this
between 1 025 and 65 534.