Specification - Toshiba TOSVERT VF-AS1 Instruction Manual

6.Specification

<Environment Specification>
Item
Use Environment
Ambient Temperature
Storage Temperature
Relative Humidity
Vibration
<Control Specification>
Type
Full-vector
operation with sen-
sor
PG Method
PG Wiring Length
PG Power Supply
Max. Pulse Input
Frequency
Pulse input voltage
Recommended
Encoder
Encoder Wiring
* Torque control is impossible in VF-PS1.
Indoor, less than 3,000 m from the sea level.
No direct sunlight, corrosive or explosive gas, steam, cutting dusts or dusts,
grinding solution, and grinding oil.
-10 to + 60℃
-25 to +65℃
20 to 93 % (No condensation)
5.9m/s² (0.6G) or less (from 10Hz to 55Hz)
VEC004Z
VEC005Z
VEC006Z
Speed control operation:
Torque control operation * : Torque control accuracy ± 10%
Complementary, Open-collector
100m (Max.) (Complementary)
VEC004Z : 12V -160mA
VEC005Z : 15V -150mA
VEC006Z : 24V -90mA
300kHz or less.
(In case of two-phase open collector method, derating need to be considered)
Pulse duty: 50 ± 10%
12V DC to 24V DC
Manufacturer: SUMTAK Co., Ltd.
Type: IRS360 series
Supply Voltage: From10.8V to 26.4V
Output Method: complementary output
Type of Wire: Twisted Pair Shield Cable
Conductor Resistance:
Conductor Resistance (ohm/m) x cable length (m) x 2 x power consumption (A) < V
V (V): 1.0(V) (VEC004Z, VEC005Z, VEC006Z)
D
0.3(V) (VEC007Z)
Applicable Wire: 0.2 to 0.75mm²
(Power Line) In case of 0.2mm² cable,
maximum of 30m (VEC004Z, VEC005Z, VEC006Z)
maximum of 10m (VEC007Z)
Recommended Cable :
Specification
150% torque at zero speed
Speed control range: 1:1000(1000 ppr PG)
Speed accuracy ± 0.02% (50 Hz base digital input)
Torque control range: -100 to 100%
VEC007Z : 5V -160mA
Manufacturer: SUMTAK Co., Ltd.
Type: IRS320 series
Supply Voltage: 5V
Output Method: line-driver output
KURAMO Electric: KVC-36SB
Furukawa Electric: ROVV-SB
23
E6581319
VEC007Z
Line driver
30m (Max.)
Line Driver (LTC486 equivalent)

(V)
D