Toshiba TOSVERT VF-AS1 Instruction Manual page 3

 Handling in general
▼ Never disassemble, modify or repair the inverter.
Disassembling the inverter could cause electric shocks, fire or injuries.
Never
Request your TOSHIBA distributor for repairs.
Disassemble
▼ Do not remove connectors when the power is on.
It could lead to electric shocks.
▼ Do not put or insert foreign objects such as waste cable, bars, or wires into the in-
verter.
Prohibited
It could lead to electric shocks or fire.
▼ Do not splash water over the inverter.
It could lead to electric shocks or fire.
▼ Wiring should be conducted after turning the inverter power off.
▼ Turn off the power immediately in case any abnormalities such as smokes, smells or
abnormal noise are found.
Mandatory
Neglect of these conditions could lead to fire.
Ask your TOSHIBA distributor for repairs.
 Transportation and Installation
▼ Do not install or operate the inverter if it is damaged or any part is missing from it.
Operating the inverter in a defective condition could lead to electric shocks or fire.
Ask your TOSHIBA distributor for repairs.
▼ Do not put any inflammable material near the inverter.
It could catch fire if the inverter sparks because of a breakdown and the like.
▼ Do not install the inverter where it could be splashed with water and the like.
Prohibited
It could lead to electric shocks or fire.
▼ When installing this option, be careful not to touch the leads from parts on the circuit
board.
Doing so could result in injury.
▼ Inverter must be used under environmental conditions prescribed in this instruction
manual.
Using the inverter under conditions not specified by the instruction manual could lead
Mandatory
to breakdown.
Warning
Warning
2

E6581319