Step 4: Attaching The Handle, Microphone And Grip - Sony NXCAM NEX-FS700U Operating Manual

Step 4: Attaching the handle, microphone and
grip
Attaching the handle
The handle is attached to the camcorder at
the factory.
1
Slide the handle into the
accessory shoe in the direction of
the arrow.
2
While pressing the screw down,
turn it clockwise to fasten the
handle.
Removing the handle
Remove the handle using the reversed
procedure for attaching.
z Tips
• The screw holes of the handle are for 1/4-
20UNC screws (22 mm in length).
To attach an accessory without using
the handle
Remove the handle, and fully insert the
accessory shoe plate (p. 26) in the direction
of the arrow.
Accessory shoe plate
Accessory shoe
25
Continued ,