Sony NXCAM NEX-FS700U Operating Manual page 34

Recording (Continued)
3
Press the START/STOP button.
The recording lamp lights up during recording.
To stop the movie recording, press the START/STOP button again.
b Notes
• When the access lamp is lit or flashing in red, your camcorder is reading or writing data on recording
media. Do not shake or apply strong force to your camcorder, do not turn the power off, and do not
remove the recording media, battery pack or the AC Adaptor. The image data may be destroyed.
• See page 119 on the recording time of movies.
• Your camcorder can record a movie for about 13 hours continuously.
• If a movie file exceeds 2 GB during recording, the camcorder divides the file and create a new file
automatically.
• The menu settings, the PICTURE PROFILE settings, and the settings made by the AUTO/MANUAL
switch are stored in your camcorder when you slide the POWER switch to OFF. The access lamp lights up
while the settings are being stored. If you remove the battery pack or the AC Adaptor before turning off
the power, the settings may return to the default settings.
z Tips
• When recording in high definition image quality (HD), the aspect ratio is fixed to 16:9. When recording in
standard definition image quality (SD), you can switch the aspect ratio to 4:3 ([
• You can change the screen display during recording (p. 70).
• Indicators displayed on the LCD screen during recording are shown on page 12.
• The recording lamp can be set to stay off ([REC LAMP[F]], [REC LAMP[R]], p. 102).
• You can capture still images from the movies you recorded (p. 79).
To record movies using both the memory card and the flash memory unit
(Simultaneous recording)
You can record movies on both of these recording media simultaneously.
Press MENU t select
REC] t [ON] (default setting) with the SEL/PUSH EXEC dial.
z Tips
• Set [ /
• If one of the recording media is unable to continue recording during simultaneous recording, the other
recording media continues recording without pause.
34
(REC/OUT SET) t [REC SET] t [
SET] to [ ] (p. 43) for the simultaneous recording.
[STBY] t [REC]
WIDE REC], p. 92).
SIMULTANEOUS