Sony NXCAM NEX-FS700U Operating Manual page 90

Press the MENU button t select
z Tips
• You can assign [ON/OFF] to an ASSIGN button
(p. 64).
STEADYSHOT
Only when attaching the lens with
SteadyShot.
You can set the camera shake reduction in
movie mode.
B STANDARD (
Uses SteadyShot under relatively stable
condition.
ACTIVE (
Uses SteadyShot with more powerful
effect.
OFF ( )
Does not use SteadyShot. This setting is
recommended when you use a tripod.
b Notes
• [ACTIVE] can be selected only when recording
movies using a lens with optical SteadyShot
complying with [ACTIVE].
z Tips
• You can assign this function to an ASSIGN
button (p. 64).
STEADYSHOT
Only when attaching the lens with
SteadyShot.
You can set the camera shake reduction in
photo mode.
B ON ( )
Uses SteadyShot.
OFF ( )
Does not use SteadyShot. This setting is
recommended when you use a tripod.
z Tips
• You can assign this function to an ASSIGN
button (p. 64).
90
)
)
(CAMERA SET) with the SEL/PUSH EXEC dial.
SLOW & QUICK
See page 49.
FOCUS TRANSITION
TRANSITION TIME
x
You can set the time to shift the focus.
3.5sec, B 4.0sec, 4.5sec - 15.0sec
(0.5sec increments), 20.0sec, 30.0sec,
45.0sec, 60.0sec, 90.0sec
START TIMER
x
You can set the time to start the transition
after the ASSIGN 5 or ASSIGN 6 button is
pressed.
B OFF, 5sec, 10sec, 20sec
REC LINK
x
You can link the time you start recording
with the time focus shifts.
B OFF, FOCUS-A, FOCUS-B
b Notes
• [FOCUS TRANSITION] function is effective
only on the [EXEC] screen.
SPOT FOCUS
See page 39.
FACE DETECTION
See page 39.