Sony NXCAM NEX-FS700U Operating Manual page 100

Press the MENU button t select
TC RUN
You can select how the time code advances.
B REC RUN
Advances the time code only during
recording.
Select this setting to record the time code
sequentially from the last time code of the
previous recording.
FREE RUN
Advances the time code regardless of
operation of your camcorder.
b Notes
• Even if the time code advances in the [REC
RUN] mode, the time code may not be recorded
sequentially in the following cases:
– When the recording format is changed.
– When the images are recorded on the memory
card and the flash memory unit
simultaneously.
– When the recording media is removed.
• [REC RUN] is selected automatically for the
Slow & Quick Motion recording and Super
Slow Motion recording.
TC MAKE
B PRESET
Records the newly set time code on the
recording media.
REGENERATE
Reads the last time code of the previous
recording from the recording media and
records the new time code consecutively
from the last time code during the
backspace editing.
The time code runs in [REC RUN] mode
regardless of the setting of [TC RUN].
100
(TC/UB SET) with the SEL/PUSH EXEC dial.
UB TIME REC
B OFF
Does not save the actual time in the user
bit code.
ON
Saves the actual time in the user bit code.
b Notes
• The last 2 digits are fixed to 00 when it is set to
[ON].