Advertisement
FITTING THE GLASS – CHIC-VANILLA MODELS
• Take the lamps and insert them in the lamp holders.
• They do not have to be screwed in, but simply inserted
all the way.
• Fix the glass 5 to the plate using the screws 12d and
washers 22 in the top part.
• Fix the glass elements together at the bottom using the
glass fixing plates 6 with screws 12e and washers 22.
FITTING THE GLASS – VERTIGO-KALEIDOS-LUXIA MOD-
• Take the lamps and insert them in the lamp holders.
• They do not have to be screwed in, but simply inserted
all the way.
• Fix the glass (or other material) 5 to the plate using the
fixing knobs 12d.
Electrical connection
• Connect the Hood to the Mains Power Supply, inserting
a bipolar switch with a contact aperture of at least 3
mm.
• Open the lighting unit by pulling on the catch provided
• Remove the Filter, pushing it towards the back of the
unit and at the same time pulling downward.
• Make sure that the Power cable has been properly in-
serted into the Suction fan socket
• Replace the Grease filter and then the lighting unit.
EN
ELS
1 18
Advertisement
