Advertisement
• Wind the power cable around its axis so that it
forms a spiral from the mobile body to the plate in
the ceiling.
• It is important to do this to prevent the wire come
out from the hood body during the closing of the
hood
Finally, check that the power supply cable is properly locked, checking that when the mobile
unit rises up towards the ceiling, it positions itself over the mobile unit and does not come out
from the edge of the hood.
The length of the Power Cable "L" must be equal to the stroke "X" plus 50mm for the Recir-
culation Version and 200 mm for the Ducting Version.
L = X + 50 mm
Recirculation version
L = X + 200 mm Ducting version
EN
FIXING THE POWER SUPPLY CABLE
X
• Take the cable clamp 3 provided.
• Insert the Power cable in the Cable
clamp 3 and screw it to the plate us-
ing one of the Screws 12c provided.
L
1 17
Advertisement
