Advertisement
N.B. Before continuing with installation it is necessary to move the hood to a height
of at least 650 mm from the cooker hob, using a support or the assistance of an-
other person.
This is essential, as the hood cables must necessarily be connected to the plate
fitted to the ceiling without the weight of the hood bearing on the structure.
• The cable fixing system is made up of 3 parts:
• Threaded Pawls (a) already mounted on the ceiling plate.
• Cable clamp screws (b) provided.
• Safety knobs (c) provided.
• Insert the cable
raceway 4 in the
opening on the
plate cover and
pass the hood
power supply
cable through it.
EN
CONNECTING HOOD-PLATE CABLES
• Pass the cables connected to the hood ca-
nopy into the respective holes in the plate
cover, after dismantling
a
b
c
4
1 11
Advertisement
