Applying The Cuff - Walgreens BM-725W Owner's Manual

Important Reminders
While Taking a Measurement
Sit with your legs uncrossed and your feet flat on the
floor.
For consistency, it's a good idea to measure you blood
pressure using the same arm and at about the same
time each day. If possible, we suggest using the left
arm.
Relax. Sit still and quietly while measuring. Talking or
moving may elevate measurements. Do not touch the cuff
or monitor during the measurement.
When taking multiple measurement right after each other,
make to wait at least 8-10 minutes in between. Waiting
allows your blood vessels to return to their normal state.
... ... ... ... ...
14

Applying the Cuff

1.If your arm measures 9"-13" around, use
the regular cuff included with your monitor.
If your arm measures 13"-17" around, please
use a Walgreens Large Cuff (Model #BC-
200W).
2.Before taking a measurement, read the
Important Reminders on pages 14-15. Make
certain the cuff plug is inserted securely in
the monitor and the cuff is assembled
properly. Remove any constricting or thick
clothing from your upper arm.
3.Slide your arm through the cuff loop. The
cuff should be positioned on your bicep
about 1/2" above the elbow. With your palm
facing up, the red arterial marker should be
in the center of your arm over the brachial
artery. The cuff tube should run down the
center of your arm. Instructions are also
printed on the cuff for reference.
4.Secure the cuff around your arm using the
velcro so it fits securely but is not too tight.
You should be able to place 2 fingers in
between the cuff and your arm.
5.The velcro tab should fall within the "OK"
range printed on the cuff for proper use. If
your arm is larger than 13" around and the
cuff does not fall within the "OK" range,
please use a Walgreens Large Cuff (Model
#BC-200W).
6.Relax your arm and place your elbow on the
table.
0.8" - 1.2"
............................
15