Panasonic AG-HPX500P Quick Manual page 11

Return Video, Tally
AG-YA500G
Remote Cable
VF interface Box
(bundled to AG-CA300G)
G/L
HD/SD
AG-HPX500 series
New Camera Studio System
A new camera studio system to support low-cost studio integration.
Two BNC cables allow the transmission of high-quality HD digital
images, return images, tally signals, wireless mic signals, and
genlock signals over a cable length of 100 m maximum. An
additional cable is needed to run camera power.* The AG-EC4G
Extension Control Unit, enables full control over image adjustments
and recording, together with the AG-YA500G VF Interface Box,
which enables return video viewing with the AG-HPX500 series
viewfinder.
*Power can be supplied only when the AG-BS300 Base Station is driven by an AC power
source. A separate power cord is also required between the AG-BS300 Base Station and
the AG-CA300G Camera Adaptor.
Remote Control-Ready
The AG-EC4G Extension Control Unit or AJ-RC10G Remote Control
Unit* offer both studio use and direct connection to the AG-HPX500
series. This lets you adjust the images and control the camera
operation while viewing the monitor.
*The AJ-RC10G can control only functions supported by the AG-HPX500 series. It cannot
control unsupported keys or dials.
AG-CA300G
Remote Control
Camera Adapter
Power supply
G/L, Return Video, Tally
HD/SD
Headset
(produced by
another manufacturer)
Bound Cable made by Canare Electric
V2PCS25-5CFWCE-SF-SC (82'/25m)
V2PCS50-5CFWCE-SF-SC (164' /50m)
V2PCS100-5CFWCE-SF-SC (328' /100m)
AG-BS300
Base Station
G/L Return
max. 328'/100m
another manufacturer)
Multi-Camera-Compatible TC-IN/TC-OUT Terminals
The AG-HPX500 series has a built-in SMPTE time code generator/
reader. The TC-IN/TC-OUT terminals are independent, so through-
connection is possible. The AG-HPX500 series supports TC
synchronous recording using multiple cameras.
Other System Functions and Options
• Analog component (Y/P /P
B
• DC power supply for the BT-LH80W 7.9" LCD monitor
• Color bar (full color) and standard audio signal
(1-kHz test tone) output
• Multiple battery support, including Anton Bauer batteries
10-pin Cable (10m/50m)
Camera Image
AG-HPX500 series
Remote Control
AJ-RC10G
Remote Controller
or
Video/
Tally
AG-EC4G
Headset
Extension Control Unit
(produced by
) output
R
AJ-RC10G
Remote Control Unit
or
VBS
SD Monitor
AG-EC4G
Extension Control Unit