Safety; Maintenance; The Marking Of Products Using Lasers - Kenwood KDC-U553BT Instruction Manual

Safety

¤WARNING
Stop the car before operating the unit.
Important to know...
To prevent a short circuit, never put or leave
■ ■
any metallic objects (such as coins or metal
tools) inside the unit.
Caution: Adjust the volume so that you can
■ ■
hear the sound outside the car. Driving with
the volume adjusted to a too high level may
cause an accident.
Condensation: When the car is air-
■ ■
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
The illustrations in this manual are examples
■ ■
used to explain more clearly how the
controls are used. Therefore, what appears
on the illustrations may differ from what
appears on the actual equipment.
If you experience problems during
■ ■
installation, consult your Kenwood dealer.
When you purchase external components,
■ ■
check with your Kenwood dealer to make
sure that they work with your model and in
your area.

Maintenance

Cleaning the unit: Wipe off the dirt on the
panel with a dry silicon or soft cloth. Failure
to observe this precaution may result in
damage to the monitor or unit.
Cleaning the connector: The unit may not
function properly if the connector between
the unit and faceplate are dirty. Detach the
faceplate and clean the connector with a
cotton swab gently, being careful not to
damage the connector.
Connector (on the reverse
side of the faceplate)
The marking of products using
lasers
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1.
It means that the unit is utilizing laser beams
that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
The Bluetooth word mark and logos are
■ ■
owned by the Bluetooth SIG, Inc. and
any use of such marks by JVC KENWOOD
Corporation is under license. Other
trademarks and trade names are those of
their respective owners.
"Made for iPod" and "Made for iPhone"
■ ■
mean that an electronic accessory has
been designed to connect specifically
to iPod or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod or iPhone
may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and
■ ■
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
3
English