Related Manuals for Kenwood KDC-U556BT
Summary of Contents for Kenwood KDC-U556BT
- Page 1 KDC-U556BT CD-RECEIVER INSTRUCTION MANUAL © 2012 JVC KENWOOD Corporation GET0860-001A (M0)
-
Page 2: Table Of Contents
CONTENTS BEFORE USE BEFORE USE Warning Do not operate any function that takes your attention away from safe driving. BASICS GETTING STARTED Caution Volume setting: RADIO • Adjust the volume so that you can hear sounds outside the car to prevent accident. •... -
Page 3: Basics
BASICS Faceplate Remote control (RC-406) Attach Remote sensor (Do not expose to bright sunlight.) Volume knob (turn/press) Loading slot Detach Pull out the insulation sheet when using for the first time. How to replace the battery How to reset Detach Display window button Your preset adjustments... -
Page 4: Getting Started
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). Press and hold SCRL DISP to enter clock adjustment mode directly For details on how to update the firmware, see: www.kenwood.com/cs/ce/ while in clock display screen. Then, perform steps... -
Page 5: Radio
RADIO Direct Access Tuning (using RC-406) Press AM– / #FM+ to select a band. Press DIRECT to enter Direct Access Tuning. “– – – • –” (for FM), “– – – –” (for MW/ SW1) or “– – – – –” (for SW2) appears on the display. -
Page 6: Cd / Usb / Ipod
Turn the volume knob to make a selection, then press the knob. The source changes to USB and playback starts. • MP3/WMA file: Select the desired folder, then a file. • iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music iPod/iPhone Control (KMC) file *... -
Page 7: Aux
CD / USB / iPod Preparation: Direct Music Search (using RC-406) Set the skip ratio Select [ON] for [BUILT-IN AUX]. (➜ 4) Press DIRECT. While listening to iPod or KME Light/ KMC file... Press the number buttons to enter a track/file Press the volume knob to enter [FUNCTION]. -
Page 8: Bluetooth
BLUETOOTH® You can operate Bluetooth devices using this unit. Pair a Bluetooth device When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the You can either use the built-in microphone located on device. - Page 9 BLUETOOTH® Bluetooth mobile phone Bluetooth mode operations Do this Press to enter Bluetooth mode. Turn the volume knob to make a selection (see the following table), then Receive a call Press or the volume knob or one of the number press the knob.
- Page 10 BLUETOOTH® Default: XX Alphabet Search SETTINGS You can search through the contacts quickly according to the first letter (A to Z), number (0 to 9), or symbol. PAIRING PHONE SELECT : Select the phone or audio device to connect or disconnect. •...
- Page 11 BLUETOOTH® Bluetooth audio player Use Voice Recognition Operations and display indications may differ according to their availability on the Press and hold connected device. Speak the name of the contact you want to call or the voice command to Do this control the phone functions.
-
Page 12: Audio Settings
AUDIO SETTINGS While listening to any source... PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Press the volume knob to enter [FUNCTION]. Selects a preset equalizer suitable to the music genre. (Select [USER] to Turn the volume knob to select [AUDIO CONTROL], then press the knob. use the customized bass, middle, and treble settings.) Turn the volume knob to make a selection (see the following table), then BASS BOOST... -
Page 13: Display Settings
Although the audio files are complied with the [USER] is selected). The color you have created can be selected when you • You cannot operate iPod if “KENWOOD” or standards listed above, playback maybe impossible select [USER]. -
Page 14: Troubleshooting
TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. “READING” keeps flashing. Do not use too many hierarchical levels or folders. • Check the cords and connections. Elapsed playing time is not This is caused by how the tracks are recorded. -
Page 15: Specifications
SPECIFICATIONS FM Frequency Range 87.9 MHz to 107.9 MHz (200 kHz space) Version Bluetooth Ver.2.1+EDR Certified 87.5 MHz to 108.0 MHz (50 kHz space) Frequency Range 2.402 GHz to 2.480 GHz Usable Sensitivity 11.2 dBf (1.0 μV/75 Ω) Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class (S/N = 26 dB) Maximum Communication Range... -
Page 16: Installation / Connection
Installating the unit (in-dash mounting) Warning • The unit can only be used with a 12 V DC power supply, negative ground. Do the required • Disconnect the battery’s negative terminal before wiring and wiring. (➜ 17) mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. -
Page 17: Wiring Connection
(Power control wire) P. CONT ( ×2 ) Brown To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood Ignition switch (Mute control wire) MUTE F Flat head screw navigation system, refer your navigation manual.) - Page 18 • Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective...