Subscribe to Our Youtube Channel
Related Manuals for Kenwood KDC-U3046
Summary of Contents for Kenwood KDC-U3046
- Page 1 CD-RECEIVER KDC-U446 KDC-U346 KDC-U5046 KDC-U4046 KDC-U3046 INSTRUCTION MANUAL © B64-4531-00/00 (MW/M0)
-
Page 2: Table Of Contents
My Playlist for iPod iPod Control by Hand Mode Direct Music Search Tuner Operation Frequency Step Setting Basic Operations of Remote Control 16 KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Appendix Accessories/Installation Procedure 19 Connecting Wires to Terminals Installation/Removing the Unit Troubleshooting Guide Specifications •... -
Page 3: How To Reset Your Unit
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ “... -
Page 4: Exit Of Demonstration Mode
Press the [VOL] knob to finish the hour adjusting. The minute display blinks. Turn the [VOL] knob to adjust the minute. Press the [VOL] knob to finish the minute adjusting. KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Disc slot [DISP] [1][2] [3][4] [5][6] Common Operation... -
Page 5: Playing Music (Cd/Usb/Ipod)
Playing Music (CD/USB/iPod) Playing Disc Insert a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Playing USB device Connect a USB device or iPod to the USB terminal. When connected, the source is switched automatically and a song is starts playing. -
Page 6: General
Also avoid places with too much dust or the possibility of water splashing. KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Muting Volume upon Reception of Phone Call The audio system automatically mutes when a call comes in. -
Page 7: Display Indicator
Display Indicator KDC-U346/ KDC-U4046/ KDC-U3046 KDC-U446/ KDC-U5046 1 “ATT“ indicator: Blinks when the attenuator function is on. Use the remote control to turn on/off the attenuator function (page 16). 2 “ST“ indicator: Lights when a stereo broadcast is received. 3 “EQ“ indicator: Lights when System Q (page 9) is set to an EQ mode other than “NATURAL”. -
Page 8: Function Setting
ø Dimmer: “DIMMER SET” ➤ “ON”,”OFF”* Adjusts the brightness of the display according to the surrounding illumination. KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 π Text Scroll: “TEXT SCROLL” ➤ “AUTO”*, ”MANUAL” Scrolls the CD and audio file text display. Selecting AUTO scrolls them automatically. -
Page 9: Demo Mode
Selecting “YES” and then pressing [VOL] knob starts upgrading the firmware. ⁄ • For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ <DEMO MODE> Ú Demo Mode: “DEMO MODE” ➤ “ON”*, ”OFF” Specifies whether to enable demonstration. <AUDIO CONTROL>... -
Page 10: Function List
' Volume offset: “VOL OFFSET”/“VOLUME OFFSET” ➤ “- 8” – ”±0” ” (When in AUX source: ”-8” – ”+8”) Sets each source’s volume as a difference from the basic volume. KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Function List Function items appearing during standby “SETTINGS” “CLOCK”... - Page 11 Function items appearing when the CD & audio file source is selected “SUB-W SET”/“SUBWOOFER SET” " “AUDIO CONTROL”/ “BASS BOOST” Æ “AUDIO “SYSTEM Q” å CTRL” “BASS LEVEL” ß “MID LEVEL” ∂ “TRE LEVEL” ƒ “BALANCE” © “FADER” ˙ “SUB-W LEVEL” Δ “DETAIL SET”/ “DETAILED SET”...
-
Page 12: Music Disc/Audio File Operation
<Function Setting> (page 8). Keep pushing the [4] or [¢] button for 3 seconds or longer skips songs at 10% regardless of the setting. • * This operation is effective only for the files registered in the database created with KENWOOD Music Editor. -
Page 13: Music Search For Ipod
Function of KDC-U446/ KDC-U5046 with iPod Music Search for iPod Searches for the song (in iPod) you want to play. Enter Music Search mode Press the [ ] button. “SEARCH” is displayed. Search for music Operation type Operation Movement between items Turn the [VOL] knob. Skip Search Press the [4] or [¢] button. -
Page 14: My Playlist For Ipod
Turn the [VOL] knob to display the song you want to delete, and then press the [VOL] knob for at least 2 seconds. KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Turn the [VOL] knob to select ”ONE” or “ALL”, and then press the [VOL] knob. -
Page 15: Tuner Operation
Tuner Operation Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, MW band 9 kHz. Turn the power OFF Press the [SRC] button for at least 1 second. Switch the frequency step While pressing the [1] and [5] buttons, press the [SRC] button. -
Page 16: Kdc-U446/ Kdc-U346/ Kdc-U5046/ Kdc-U4046/ Kdc-U3046
Enter Audio Control mode: [AUD] In Tuner source Band select: [FM+]/[AM–] Station select: [4]/[¢] Recall preset stations: [1] — [6] KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 In iPod/CD/Audio file source Music select: [4]/[¢] Folder select: [FM+]/[AM–] Pause/Play: [38] Movement between folders/files: [5]/[∞]... -
Page 17: Appendix
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. English... -
Page 18: Class 1 Laser Product
KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application... -
Page 19: Accessories/Installation Procedure
Accessories/Installation Procedure Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. -
Page 20: Connecting Wires To Terminals
REMOTE INPUT Connect to the terminal that is grounded when either the telephone rings MUTE or during conversation. ⁄ To connect the Kenwood navigation system, consult your navigation manual. Car fuse box Ignition key switch Car fuse box (Main fuse) -
Page 21: Installation/Removing The Unit
Installation/Removing the Unit Non-Japanese Cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 22: Troubleshooting Guide
• The unit is set to Function Setting mode. ☞ Cancel the Function Setting mode. (page 8) KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. - Page 23 ➪ Press the reset button on the unit. If the “ERROR 99” code does not disappear, consult your nearest service center. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash...
-
Page 24: Specifications
Dynamic range : 93 dB MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 USB Interface USB Standard : USB1.1/ 2.0 (Full speed) Maximum Supply current : 500 mA...
Need help?
Do you have a question about the KDC-U3046 and is the answer not in the manual?
Questions and answers