How To Use Accessory Tray; Low Pressure; High Pressure - Troy-Bilt 20240 Owner's Manual

Section 4: Operation

How to Use Accessory Tray

The unit is equipped with an accessory tray with places to
store your rotating brush, utility brush, turbo nozzle, and
ProjectPro™ nozzles.There is also a hook at the front of
the accessory tray to hold your high pressure hose.
1. Store your gun and nozzle extension on the hooks
attached to the base and handle, as shown in Figure 13.
Figure 13 — Typical Accessory Tray
2. Place rotating brush through hole on accessory tray on
right side of unit (Figure 13).
3. Place utilty brush through hole on accessory tray, as
shown in Figure 13.
3. Push turbo nozzle up and into clip on accessory tray
until it snaps in, as shown in Figure 13.
4. Hang high pressure hose on hook attached to accessory
tray on front of tray, as shown in Figure 13.
How to Use ProjectPro™ Nozzle
System
The quick–connect on the nozzle extension allows you to
switch between four different ProjectPro™ system nozzles.
The ProjectPro™ nozzles vary the pressure and spray
pattern as shown (Figure 14).
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER exchange ProjectPro™ nozzles without locking the
trigger lock on the trigger.
• DO NOT twist ProjectPro™ nozzles while spraying.
Figure 14 — Nozzle Spray Patterns

Low Pressure

High Pressure

Delicate
40° Yellow
1750 PSI
2.3 GPM
Follow these instructions to change ProjectPro™
nozzles:
1. Engage trigger lock on spray gun.
2. Pull back collar on quick–connect and pull current
ProjectPro™ nozzle off. Store ProjectPro™ nozzles in
holder provided on the accessory tray.
3. Select desired ProjectPro™ nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats, RV's,
patio furniture, lawn equipment, etc., select yellow
Delicate ProjectPro™ nozzle (Figure 15).
Figure 15 — Delicate Nozzle
12
Black
Use to apply
detergent
Max
General
0° Red
15° Orange
2550 PSI
2200 PSI
2.0 GPM
2.2 GPM