Enabling And Disabling Parksense; Service The Parksense® Rear Park Assist; System - RAM TRUCK 1500 Owner's Manual

Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch.
When the ParkSense switch is pressed to dis-
able the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Elec-
tronic Vehicle Information Center (EVIC)" in "Under-
standing Your Instrument Panel" for further information.
When the shift lever is moved to REVERSE and the
system is disabled, the EVIC will display the
"PARKSENSE OFF" message for as long as the vehicle is
in REVERSE.
NOTE: The ParkSense® system will automatically dis-
able when the system detects that a trailer with trailer
brakes has been connected to the Integrated Trailer Brake
Module. The EVIC will display "PARKSENSE OFF"
message for as long as the vehicle is in reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189
The ParkSense® switch LED will be ON when
ParkSense® is disabled or defective. The ParkSense®
switch LED will be OFF when the system is enabled.
Service The ParkSense® Rear Park Assist

System

When the ParkSense® Rear Park Assist System is mal-
functioning, the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
PARKSENSE UNAVAILABLE WIPE REAR SENSORS
or the PARKSENSE UNAVAILABLE SERVICE RE-
QUIRED message. Refer to "Electronic Vehicle Informa-
tion Center (EVIC)" in "Understanding Your Instrument
Panel" for further information. When the shift lever is
moved to REVERSE and the system has detected a
faulted condition, the
PARKSENSE UNAVAILABLE WIPE REAR SENSORS
EVIC will display the
3