680 MAINTAINING YOUR VEHICLE
Side Marker Lamps
(Dual Rear Wheels)
Backup Lamp
Rear License Plate Lamp
BULB REPLACEMENT
Base Quad / Premium Bi-Halogen: Low Beam
Headlamp, High Beam Headlamp, Front Park And
Turn – If Equipped
1. Open the hood.
2. Disconnect and isolate the negative battery cable.
3. Remove the four plastic push-in fasteners that secure
the upper radiator seal to the grille support and both
fender ledges.
4. Remove the two plastic push-in rivets that secure the
Bulb Number
194
5. Remove the upper radiator seal from the vehicle.
921
6. Remove the two headlamp assembly attachment screws.
194
upper radiator seal to the radiator.