Electronic Vehicle Information Center (Evic); Display Messages; Operation - RAM TRUCK 1500 Owner's Manual

EVIC. Refer to "Electronic Vehicle Information Cen-
ter (EVIC)" in "Understanding Your Instrument
Panel" for further information.
NOTE:
• If equipped with a touch screen radio all enabling/
disabling of air suspension features must be done
through the radio. Refer to "Uconnect® Access Set-
tings" in "Understanding Your Instrument Panel" for
further information.

Electronic Vehicle Information Center (EVIC)

Display Messages

When the appropriate conditions exist, a message will
appear in the EVIC display. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information.
An audible chime will be heard whenever a system error
has been detected.

Operation

The indicator lamps 3 through 6 will illuminate to show
the current position of the vehicle. Flashing indicator
lamps will show a position which the system is working
to achieve. When raising, if multiple indicator lamps are
flashing, the highest flashing indicator lamp is the posi-
tion the system is working to achieve. When lowering, if
multiple indicators are flashing, the lowest solid indica-
tor lamp is the position the system is working to achieve.
Pressing the "UP" button once will move the suspension
one position higher from the current position, assuming
all conditions are met (i.e. key in ON/RUN position,
engine running, speed below threshold, etc). The "UP"
button can be pressed multiple times, each press will
raise the requested level by one position up to a maxi-
mum position of OR2 or the highest position allowed
based on current conditions (i.e. vehicle speed, etc).
STARTING AND OPERATING 415
5