RAM Truck 3500 2011 Owner's Manual

Table of Contents

Quick Links

Download this manual

RAM TRUCK

2 0 1 1

1 5 0 0 / 2 5 0 0 / 3 5 0 0

O W N E R ' S M A N U A L

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the Truck 3500 2011 and is the answer not in the manual?

Questions and answers

Summary of Contents for RAM Truck 3500 2011

Page 1 RAM TRUCK 2 0 1 1 1 5 0 0 / 2 5 0 0 / 3 5 0 0 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc.
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5 INTRODUCTION CONTENTS Introduction ......4 Van Conversions/Campers ....6 How To Use This Manual .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 7 INTRODUCTION 5...
Page 8: Van Conversions/Campers
6 INTRODUCTION WARNINGS AND CAUTIONS Operating instructions for the special equipment in- This Owner’s Manual contains WARNINGS against op- stalled by the conversion/camper manufacturer should erating procedures that could result in a collision or also be supplied with your vehicle. If these instructions bodily injury.
Page 9: Vehicle Identification Number
INTRODUCTION 7 VEHICLE IDENTIFICATION NUMBER NOTE: It is illegal to remove or alter the VIN. The Vehicle Identification Number (VIN) is found on the VEHICLE MODIFICATIONS/ALTERATIONS left front corner of the instrument panel, visible through the windshield. This number also appears on the Auto- WARNING! mobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration and title.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ General Information ....18 A Word About Your Keys ....12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — Windows ......34 If Equipped .
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Enhanced Seat Belt Use Reminder System ▫ Child Restraints ..... . 67 (BeltAlert ) .
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN) — If Equipped The Wireless Ignition Node (WIN) operates similar to an Key Fob with Remote Keyless Entry (RKE) — If ignition switch. It has four operating positions, three with Equipped detents and one that is spring-loaded.
Page 15: Key Fob
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 16: Removing Key Fob From Ignition
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK (if equipped with an then pull the key out with your other hand.
Page 17: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 (EVIC)/Personal Settings (Customer-Programmable CAUTION! Features)” in “Understanding Your Instrument Panel” for further information. An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors WARNING! when leaving the vehicle unattended.
Page 18: Sentry Key
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY bulb check, it indicates that there is a problem with the The Sentry Key Immobilizer System prevents unauthor- electronics. In addition, if the light begins to flash after ized vehicle operation by disabling the engine. The the bulb check, it indicates that someone used an invalid system does not need to be armed or activated.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 All of the Key Fobs provided with your new vehicle have Duplication of Key Fobs may be performed at an autho- been programmed to the vehicle electronics. rized dealer, this procedure consists of programming a blank Key Fob to the vehicle electronics.
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information Security Light will flash. Use of the Sentry Key will The Sentry Key system complies with FCC rules Part 15 disable the alarm. and with RSS-210 of Industry Canada. Operation is Rearming Of The System subject to the following conditions: The Vehicle Security Alarm will rearm itself after the 15...
Page 21: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: If the Vehicle Security Light stays on continu- Vehicle Security Alarm will arm regardless of whether ously during vehicle operation, have the system checked you are in the vehicle or not. If you remain in the vehicle by an authorized dealer.
Page 22: Remote Keyless Entry (Rke) - If Equipped
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: at speeds 5 mph (8 km/h) and above disables the system • The front courtesy overhead console and door cour- from responding to all RKE transmitter buttons for all tesy lights do not turn off if the dimmer control is in RKE transmitters.
Page 23 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 setup for driver door first, otherwise this will unlock all 1. Press and hold the LOCK button on a programmed doors), or twice within five seconds to unlock all doors. RKE transmitter for at least four seconds, but no longer The turn signal lights will flash to acknowledge the than ten seconds.
Page 24: To Lock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lamps With Remote Key Lock 3. Test the feature while outside of the vehicle by press- This feature will cause the turn signal lights to flash when ing the LOCK/UNLOCK buttons on the RKE transmitter the doors are locked or unlocked with the RKE transmit- with the ignition switch in the OFF position and the key ter.
Page 25: Remote Open Window Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Sound Horn With Remote Key Lock 3. Test the feature while outside of the vehicle by press- This feature will cause the horn to chirp when the doors ing the LOCK button on the RKE transmitter with the are locked with the RKE transmitter.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • You may need to be less than 35 ft (11 m) from the Using The Panic Alarm To turn the Panic Alarm feature ON or OFF, press and vehicle when using the RKE transmitter to turn off the hold the PANIC button on the RKE transmitter for at Panic Alarm due to the radio frequency noises emitted least one second and release.
Page 27: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • This device must accept any interference received, 1. With the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the RKE including interference that may cause undesired transmitter apart.
Page 28: Remote Starting System - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Ignition key removed from ignition switch REMOTE STARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry • Battery at an acceptable charge level (RKE) transmitter to start the engine conve- •...
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Remote Start Abort Message On Electronic Vehicle will chirp twice (if programmed). Once the vehicle has Information Center (EVIC) — If Equipped started, the engine will run for 15 minutes. The following messages will display in the EVIC if the NOTE: vehicle fails to remote start or exits remote start prema- •...
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To avoid unintentional shut downs, the system message “Turn To On” will flash in the EVIC until you will disable the one time press of the REMOTE START turn the ignition switch to the ON/RUN position. button for two seconds after receiving a valid Remote Remote Start Comfort Systems —...
Page 31: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an Front and rear doors may be locked by moving the lock accident, lock the vehicle doors when you drive as knob down or unlocked by moving the lock knob up.
Page 32: Power Door Locks - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped power locks will not operate. This prevents you from A power door LOCK switch is on each front door trim accidentally locking your Key Fob in the vehicle. Remov- panel.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 6. The doors were not previously locked using the power 2. Within 15 seconds, cycle the ignition switch between door lock switch or Remote Keyless Entry (RKE) LOCK and ON/RUN and then back to LOCK four times transmitter ending up in the LOCK position (do not start the engine).
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock Doors — If Equipped 2. Fasten your seat belt. (Fastening the seat belt will This feature unlocks all of the doors of the vehicle when cancel any chimes that may be confusing during this either front door is opened.
Page 35: Child-Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Child-Protection Door Lock engage and disengage the Child-Protection locks. When To provide a safer environment for children riding in the the system on a door is engaged, that door can only be rear seat, the rear doors (if equipped) of your vehicle opened by using the outside door handle even if the have the Child-Protection Door Lock system.
Page 36: Windows
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS WARNING! Power Windows – If Equipped Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 windows. There is a single opening and closing switch on WARNING! the front passenger door for passenger window control and on the rear doors of Quad Cab , Mega Cab and Never leave children alone in a vehicle. Leaving Crew Cab models.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the window part way, press to the first detent conditions may trigger the auto reverse function unex- and release it when you want the window to stop. pectedly during auto closure. If this happens, pull the switch lightly to the first detent and hold to close the Auto-Up Feature With Anti-Pinch Protection window manually.
Page 39: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window LOCKOUT Switch —...
Page 40: Occupant Restraints
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • An energy-absorbing steering column and steering normal occurrence and can be minimized. If the rear windows are open and buffeting occurs, open the front wheel and rear windows together to minimize the buffeting. •...
Page 41: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The Advanced Front Airbags have a multistage Buckle up even though you are an excellent driver, even inflator design. This allows the airbag to have different on short trips. Someone on the road may be a poor driver rates of inflation based on the severity and type of and cause an accident that includes you.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE accident the belt will lock and reduce the risk of you WARNING! (Continued) striking the inside of the vehicle or being thrown out. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat WARNING! belts.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 plate and pull out the belt. Slide the latch plate up the 3. When the belt is long enough to fit, insert the latch webbing as far as necessary to allow the belt to go around plate into the buckle until you hear a “click.”...
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt that is worn under your arm is dangerous. • A belt buckled into the wrong buckle will not Your body could strike the inside surfaces of the protect you properly.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 tilt the latch plate and pull on the lap belt. A snug belt WARNING! reduces the risk of sliding under the belt in an accident. • A lap belt worn too high can increase the risk of internal injury in an accident.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. Regular Cab Front Center Three Point Belt The belt will automatically retract to its stowed position. 1. The front center seat belt on the Regular Cab may be If necessary, slide the latch plate down the webbing to disconnected to open up utilization of the storage areas allow the belt to retract fully.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • If the black latch and black buckle are not prop- erly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in an accident.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Inserting Latch Plate In Use Position...
Page 49: Lap/Shoulder Belt Untwisting Procedure
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Lap/Shoulder Belt Untwisting Procedure located on the upper belt guide to release the anchorage, Use the following procedure to untwist a twisted lap/ and then move it up or down to the position that fits you shoulder belt.
Page 50: Center Lap Belts
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE you will prefer a higher position. When you release the WARNING! (Continued) anchorage, try to move it up or down to make sure that • A belt that is too loose or too high will apply crash it is locked in position.
Page 51: Seat Belts In Passenger Seating Positions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Driver Center Passenger WARNING! First Row • The belt and retractor assembly must be replaced Second Row Cinch if the seat belt assembly “Automatic Locking Re- Third Row tractor (ALR)” feature or any other seat belt func- •...
Page 52: Automatic Locking Retractor (Alr) Mode - If Equipped
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Locking Retractor (ALR) Mode – If How To Disengage The Automatic Locking Mode Equipped Unbuckle the combination lap/shoulder belt and allow it In this mode, the shoulder belt is automatically pre- to retract completely to disengage the Automatic Locking locked.
Page 53: Enhanced Seat Belt Use Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 accident. These devices may improve the performance of 60 seconds of vehicle speed over 5 mph (8 km/h). The the seat belt by assuring that the belt is tight around the reminder sequence lasts for 96 seconds or until the driver occupant early in a collision.
Page 54: Seat Belts And Pregnant Women
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With all doors closed and the ignition switch in any NOTE: Although BeltAlert has been deactivated, the position except ON/RUN or START, buckle the driver’s Seat Belt Reminder Light will continue to illuminate seat belt.
Page 55: Supplemental Restraint System (Srs) - Airbags
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 extender should be used only if the existing belt is not instrument panel, above the glove compartment. The long enough. When it is not required, remove the ex- words SRS AIRBAG are embossed on the airbag covers. tender and store it.
Page 56: Airbag System Components
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Airbags have a multistage inflator NOTE: • Airbag covers may not be obvious in the interior trim, design. This allows the airbag to have different rates of inflation based on the severity and type of collision. but they will open during airbag deployment.
Page 57: Advanced Front Airbag Features
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • Supplemental Side Airbag Inflatable Curtains (SABIC) WARNING! • Front and Side Impact Sensors • No objects should be placed over or near the • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, airbag on the instrument panel, because any such and Seat Track Position Sensors objects could cause harm if the vehicle is in a...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side- impact head injuries.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! WARNING! (Continued) • If your vehicle is equipped with SABIC airbags, • If your vehicle is equipped with left and right do not have any accessory items installed which Supplemental Side Airbag Inflatable Curtain will alter the roof, including adding a sunroof to (SABIC), do not stack luggage or other cargo up your vehicle.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying airbag: children to slide the shoulder belt behind them or under their arm.
Page 61: Airbag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Do not lean against the door or window. If your vehicle WARNING! (Continued) has side airbags, and deployment occurs, the side airbags • Being too close to the steering wheel or instrument will inflate forcefully into the space between you and the panel during Advanced Front Airbag deployment door.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the impact sensor’s signals, a central electronic Advanced Front Airbags may deploy in crashes with ORC deploys the Advanced Front Airbags, SABIC air- little vehicle front-end damage but that produce a severe bags —...
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 position, in the ACC position, or not in the ignition, the WARNING! airbag system is not on and the airbags will not inflate. Ignoring the Airbag Warning Light in your instru- The ORC contains a backup power supply system that ment panel could mean you won’t have the airbags to may deploy the airbags even if the battery loses power or protect you in a collision.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE based on the collision type and severity. The steering A quantity of non-toxic gas is generated to inflate the side wheel hub trim cover and the upper right side of the curtain airbag. The inflating side curtain airbag pushes instrument panel separate and fold out of the way as the the outside edge of the headliner out of the way and airbags inflate to their full size.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Enhanced Accident Response System NOTE: Front and/or side airbags will not deploy in all In the event of an impact causing airbag deployment, if collisions. This does not mean something is wrong with the communication network remains intact, and the the airbag system.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE airbag inflation. These airborne particles may irritate Maintaining Your Airbag System the skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 with airbag system electrical components. While the WARNING! (Continued) airbag system is designed to be maintenance free. If any • Do not attempt to modify any part of your airbag of the following occurs, have an authorized dealer ser- system.
Page 68: Event Data Recorder (Edr)
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • How far (if at all) the driver was depressing the located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the accelerator and/or brake pedal; and, fuse is good.
Page 69: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 such as law enforcement, that have the special equip- WARNING! ment, can read the information if they have access to the vehicle or the EDR. In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Small Children LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”. • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least WARNING! one year old and weigh at least 20 lbs (9 kg).
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 • The belt-positioning booster seat is for children weigh- WARNING! ing more than 40 lbs (18 kg), but who are still too small • Improper installation can lead to failure of an to fit the vehicle’s seat belts properly.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats Here are some tips for getting the most out of your child Children who are large enough to wear the shoulder belt restraint: comfortably and whose legs are long enough to bend •...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 from the buckle and twist the short buckle-end belt WARNING! several times to shorten it. Insert the latch plate into • Improper installation can lead to failure of an the buckle with the release button facing out. infant or child restraint.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Each vehicle is equipped with the child restraint anchor- age system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt, instead securing the child restraint using lower anchorages and upper tether straps...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 some time. In fact, many child restraint manufacturers NOTE: • When using the LATCH attaching system to install a will provide add-on tether strap kits for some of their older products. child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out Because the lower anchorages are to be introduced to of reach of children.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing The Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Many, WARNING! but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or Do not install child restraint systems equipped with connector, and a means for adjusting the tension in the...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 then allow the belt to retract into the retractor. For WARNING! additional information on ALR, refer to “Automatic Locking Mode”. Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or To install a child restraint, first, pull enough of the seat child restraint.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint Tether Anchor WARNING! Child restraints having tether straps and hooks for con- nection to tether anchors have been available for some An incorrectly anchored tether strap could lead to time. In fact, many child restraint manufacturers will seat failure and injury to the child.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Tether Anchorage Points at the Right and Center Front Seat (Regular Cab - All Seats) 1. Place the child restraint on the seat and adjust the tether strap so that it will reach over the seat back under the head restraint to the tether anchor directly behind the seat.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Multiple Child Restraint Installation Sequence (Quad Cab /Crew Cab/Mega Cab - Rear Seats) Mega Cab 1. Place a child restraint on each outboard rear seat and adjust the tether strap so that it will reach under the head restraint to the tether anchor directly behind the seat and then to the anchor directly behind the center rear seat.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Quad Cab /Crew Cab 1. The tether straps loops are located between the rear glass and the rear seat. There is a tether strap loop located behind each seating position. You can gain access to the center seating position tether strap loop by raising the head restraint and reaching between the rear glass and rear seat.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pass each tether strap hook under the head restraint and through the loop of webbing behind the child seat. 4. Route each tether strap to the anchor behind the center seat, and attach the hooks to the anchor loop. 5.
Page 83: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Transporting Pets The engine oil installed in the engine at the factory is a Airbags deploying in the front seat could harm your pet. high-quality energy conserving type lubricant. Oil An unrestrained pet will be thrown about and possibly changes should be consistent with anticipated climate injured, or injure a passenger during panic braking or in conditions under which vehicle operations will occur.
Page 84: Safety Tips
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS WARNING! (Continued) Transporting Passengers • Be sure everyone in your vehicle is in a seat and NEVER TRANSPORT PASSENGERS IN THE CARGO using a seat belt properly. AREA. Exhaust Gas WARNING! WARNING! •...
Page 85: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 If it is necessary to sit in a parked vehicle with the engine inspect the exhaust system each time the vehicle is raised running, adjust your heating or cooling controls to force for lubrication or oil change.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE authorized dealer. If the light stays on, flickers, or comes WARNING! on while driving, have the system checked by an autho- rized dealer. Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- Defroster sonal injury.
Page 87: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Periodic Safety Checks You Should Make Outside WARNING! (Continued) The Vehicle • Check mounting of mats on a regular basis. Al- Tires ways properly reinstall and secure floor mats that Examine tires for excessive tread wear and uneven wear have been removed for cleaning.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Driver’s Automatic Dimming Mirror — If Mirrors ......93 Equipped .
Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Power Lumbar — If Equipped ... 104 ▫ Self-Limiting Control ....119 ▫...
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 ▫ Daytime Running Lights (DRL) — If ▫ Deactivating Electronic Speed Control ..136 Equipped ......127 ▫...
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Security ......157 Parkview Rear Back Up Camera — If Equipped .
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Sunroof Maintenance ....161 ▫ Glove Box Storage ....171 ▫...
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Power Sliding Rear Window — ▫ Bed Rail Tie-Down System ....196 If Equipped ......181 Slide-In Campers .
Page 95: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield).
Page 96: Automatic Dimming Mirror - If Equipped
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 97: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Outside Mirrors Outside Mirrors Folding Feature To receive maximum benefit, adjust the outside mirror(s) All exterior mirrors are designed to be able to be manu- to center on the adjacent lane of traffic with a slight ally folded both forward and rearward to prevent dam- overlap of the view obtained on the inside mirror.
Page 98: Power Mirrors - If Equipped
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! It is recommended to fold the mirrors into the full rearward position to resist damage when entering a car wash or a narrow location. Power Mirrors — If Equipped The controls for the power mirrors are located on the driver’s door trim panel.
Page 99: Power Folding Outside Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Power Mirror Controls Power Mirror Movement Power Folding Outside Mirrors — If Equipped 1 — Mirror Select Buttons 2 — Mirror Control If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive To adjust a mirror, press the mirror select button for the position.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 35 mph (56 km/h), the fold feature will be disabled, however the mirrors will attempt to unfold at any speed. If you attempt to unfold the mirrors at high speeds, they may not fully unfold - slow down and try again. The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).
Page 101: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “Rear Window Features” in “Understanding the Features of Your Vehicle” for further information.
Page 102: Trailer Towing Mirrors - If Equipped
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To use the “Slide-On-Rod” feature, rotate the sun visor Trailer Towing Mirrors — If Equipped downward and unclip it. Pull the sun visor along the These mirrors are designed with an adjustable mirror “Slide-On-Rod”...
Page 103: Uconnect™ Phone - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 NOTE: Fold the trailer towing mirrors rearward prior to Uconnect™ Phone — IF EQUIPPED entering an automated car wash. Uconnect™ Phone is a hands-free system that allows you to use voice commands to dial a phone number stored in A small blindspot mirror is located next to main mirror your mobile phone.
Page 104: Power Seats - If Equipped
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 move in the direction of the switch. Release the switch WARNING! when you have reached the desired position. • Adjusting a seat while driving may be dangerous. Adjusting The Seat Up Or Down Moving a seat while driving could result in loss of The height of the seats can be adjusted up or down.
Page 106: Power Lumbar - If Equipped
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 WARNING! CAUTION! • Persons who are unable to feel pain to the skin Repeated overheating of the seat could damage the because of advanced age, chronic illness, diabetes, heating element and/or degrade the material of the spinal cord injury, medication, alcohol use, ex- seat.
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select HIGH- before automatically shutting OFF. The heated seats can level heating. Press the switch a sec- shut OFF early or may not turn on when the seat is ond time to select LOW-level heating.
Page 109: Ventilated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 indicator lights in each switch indicate the level of heat in normal HIGH-level. If the HIGH-level setting is selected, use. Two indicator lights will illuminate for HIGH, one the system will automatically switch to LOW-level after a for LOW and none for OFF.
Page 110: Manual Seat Adjuster - If Equipped
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to choose HIGH, Manual Seat Adjuster — If Equipped press it a second time to choose LOW. Both front seats are adjustable forward or rearward. The Pressing the switch a third time will manual seat adjustment handle is located under the seat turn the ventilated seat OFF.
Page 111: Manual Reclining Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
Page 112: 40-20-40 Front Bench Seat - If Equipped
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • To avoid injury, place your hand on the seatback Do not ride with the seatback reclined so that the and actuate the handle, then position the seatback shoulder belt is no longer resting against your chest. in the desired position.
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Folding Rear Seat (Table Mode) — If Equipped Both the left and right rear seatbacks can be folded down and used as a table. To fold down either rear seatback: 1. Lift the handle, located next to the head restraint. Rear Seat Recliner Handle WARNING! Do not ride with the seatback reclined so that the...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Fold the seatback forward. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 To fold either rear seat flat: 2. Fold the seatback down and push the seat forward. 1. Lift the handle, located on the outboard side of either of the rear seats. Rear Passenger Fold Flat Seats 3.
Page 116: Head Restraints
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! An improperly latched seat could cause serious in- The head restraints for all occupants must be prop- jury or death. Make sure that the seatback is securely erly adjusted prior to operating the vehicle or occu- locked into position.
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Adjustment Button Adjustment Button Rear Head Restraints NOTE: • The rear center head restraint (Crew Cab and Quad The two outboard seat are equipped with adjustable head restraints. To raise the head restraint, pull upward on the Cab) has only one adjustment position that is used to head restraint.
Page 118: Driver Memory Seat - If Equipped
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. DRIVER MEMORY SEAT — IF EQUIPPED Driver memory seats allow the driver to recall settings for the adjustable pedals, mirrors, seats and the radio presets using the key fob.
Page 119: Setting Memory Positions And Linking Rke
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Keyless Entry (RKE) transmitters can also be pro- 2. Adjust the driver’s seat, recliner, and both sideview grammed to recall the same positions when the UN- mirrors to the desired positions. LOCK button is pressed. NOTE: Not all motors may be moved at one time.
Page 120: Memory Position Recall
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8. Turn the ignition OFF and remove the key. To recall the memory setting for driver two, press MEMORY button number 2 on the driver’s seat or the 9. Press and release the LOCK button on one of the RKE UNLOCK button on the RKE transmitter linked to transmitters.
Page 121: To Disable A Rke Transmitter Linked To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 To Disable A RKE Transmitter Linked To Memory vehicles equipped with the Electronic vehicle Informa- tion Center (EVIC), refer to “Electronic Vehicle Informa- 1. Turn the ignition switch to the OFF position and tion Center (EVIC)/Customer-Programmable Features”...
Page 122: Driver Easy Exit And Easy Entry Control
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Easy Exit And Easy Entry Control TO OPEN AND CLOSE THE HOOD This additional feature provides automatic driver’s seat To open the hood, two latches must be released. positioning which will enhance driver mobility into and 1.
Page 123: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 2. Reach into the opening beneath the center of the hood CAUTION! and push the safety latch lever from right to left to release it, before raising the hood. To prevent possible damage, do not slam the hood to close it.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE parking lights, instrument panel lights, cargo lights and Your vehicle is equipped with plastic headlight and fog fog lights (if equipped). light (if equipped) lenses that are lighter and less suscep- tible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
Page 125: Headlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Headlights To turn on the headlights, rotate the headlight switch clockwise. When the headlight switch is on the parking lights, taillights, license plate light and instrument panel lights are also turned on. To turn off the headlights, rotate the headlight switch back to the O (Off) position.
Page 126: Headlight Delay
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running before the head- Parking Lights And Panel Lights lights will turn on in the Automatic Mode. To turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise to the Headlight Delay parking light symbol.
Page 127: Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Interior Lights Courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the bottom of the switch) is rotated to the far right detent position, or if equipped, when the UNLOCK...
Page 128: Cargo Light
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE supplement the brightness of the odometer, trip odom- Cargo Light eter, radio and overhead console by rotating the control The cargo lights are turned on by pressing on the cargo to the right until you hear a click. This feature is termed button.
Page 129: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Lights-On Reminder Daytime Running Lights (DRL) — If Equipped If the headlights, parking lights, or cargo lights are left on The headlights on your vehicle will illuminate when the after the ignition is turned OFF, a chime will sound when engine is started and the transmission is in any gear the driver’s door is opened.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb.
Page 131: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 High/Low Beam Switch WINDSHIELD WIPERS AND WASHERS Push the multifunction lever toward the instrument Windshield Wipers panel to switch the headlights to high beam. Pulling the The wipers and washers are operated by a switch in the multifunction back toward the steering wheel will turn multifunction lever.
Page 132: Windshield Washers
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System depressed while in the delay range, the wiper will The intermittent feature of this system was designed for operate for several seconds after the washer knob is use when weather conditions make a single wiping cycle, released.
Page 133: Mist Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Pull the lever toward the steering wheel to unlock the WARNING! steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Sudden loss of visibility through the windshield Release the lever to lock the steering column firmly in could lead to a collision.
Page 134: Heated Steering Wheel - If Equipped
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The heated steering wheel switch is located on the switch WARNING! bank below the climate controls. Do not adjust the steering column while driving. Press the switch to turn on the heated Adjusting the steering column while driving or driv- steering wheel.
Page 135: Driver Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 from the driver to provide improved position with the WARNING! steering wheel. • Persons who are unable to feel pain to the skin The adjustable pedal switch is located to the left side of because of advanced age, chronic illness, diabetes, the steering column.
Page 136: Electronic Speed Control - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals cannot be adjusted when the vehicle is in WARNING! REVERSE or when the Electronic Speed Control Sys- tem is on. The following messages will be displayed Do not adjust the pedals while the vehicle is moving. on vehicles equipped with the Electronic Vehicle In- You could lose control and have an accident.
Page 137: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button (located in the end of the lever) once and the cruise indicator light (located in the mes- sage window of the cluster) will illuminate showing that the Electronic Speed Control system is on.
Page 138: To Set A Desired Speed
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE speed memory. Pushing the ON/OFF button to the OFF WARNING! position or turning OFF the ignition erases the set speed memory. Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidently To Resume Speed set the system or cause it to go faster than you want.
Page 139: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 To decrease speed while the Electronic Speed Control is Your vehicle may experience a downshift (automatic set, push down and hold the SET DECEL lever. If the transmissions only) while climbing uphill or descending lever is continually held in the SET DECEL position, the downhill.
Page 140: Parksense Rear Park Assist - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE REAR PARK ASSIST — IF ParkSense Sensors EQUIPPED The four ParkSense sensors, located in the rear fascia/ The ParkSense Rear Park Assist system provides visual bumper, monitor the area behind the vehicle that is and audible indications of the distance between the rear within the sensors’...
Page 141: Parksense Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 audible warnings to indicate the distance between the ParkSense Display rear fascia/bumper and the detected obstacle. When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Rear ParkSense Display Park Assist System On...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Park Assist System Off Slow Tone The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle:...
Page 144: Enabling And Disabling Parksense
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater than 79-39 in 39-25 in 25-12 in Less than (in/cm) 79 in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 145: Service The Parksense Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 approximately five seconds. Refer to “Electronic Vehicle chime, once per ignition cycle, and it will display the Information Center (EVIC)” in “Understanding Your “CLEAN PARK ASSIST SENSORS” or the “SERVICE Instrument Panel” for further information. When the PARK ASSIST SYSTEM”...
Page 146: Cleaning The Parksense System
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you move the shift lever to the REVERSE Cleaning The ParkSense System Clean the ParkSense sensors with water, car wash soap position and ParkSense is turned off, the instrument and a soft cloth. Do not use rough or hard cloths. Do not cluster will display “PARK ASSIST OFF”...
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 object as a sensor problem, causing the “SERVICE CAUTION! (Continued) PARK ASSIST SYSTEM” message to be displayed in • The vehicle must be driven slowly when using the instrument cluster. ParkSense in order to be able to stop in time •...
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Before using the ParkSense Rear Park Assist • Drivers must be careful when backing up even System, it is strongly recommended that the ball when using the ParkSense Rear Park Assist Sys- mount and hitch ball assembly is disconnected tem.
Page 149: Parkview Rear Back Up Camera - If
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 PARKVIEW REAR BACK UP CAMERA — IF When displayed, static grid lines will illustrate the width EQUIPPED of the vehicle while a dashed center-line will indicate the Your vehicle may be equipped with the ParkView Rear center of the vehicle to assist with aligning to a hitch/ Back Up Camera that allows you to see an on-screen receiver.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • To avoid vehicle damage, ParkView should only Drivers must be careful when backing up even when using the ParkView Rear Back Up Camera. Always be used as a parking aid. The ParkView camera is check carefully behind your vehicle, and be sure to unable to view every obstacle or object in your check for pedestrians, animals, other vehicles, ob-...
Page 151: Turning Parkview On Or Off - With Navigation/Multimedia Radio
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Turning ParkView On Or Off — With Turning ParkView On Or Off — Without Navigation/Multimedia Radio Navigation/Multimedia Radio 1. Press the “menu” hard-key. 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 2.
Page 152: Overhead Console - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED The overhead console is located on the headliner above the review mirror. The overhead console contains the following features: • Courtesy/Reading Lights • Power Sunroof Switch — If Equipped •...
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
Page 154: Garage Door Opener - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink unit operates off your vehicle’s battery.
Page 155: Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the Universal Transceiver. erase all channels before you begin training.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) NOTE: Some gate operators and garage door openers from the HomeLink buttons while keeping the EVIC may require you to replace Step 3 with procedures noted display in view.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 This can usually be found where the hanging antenna 6. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
Page 158: Gate Operator/Canadian Programming
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming successfully accepted the frequency signal. The EVIC Canadian radio-frequency laws require transmitter sig- display will change from “CHANNEL # TRAINING” to nals to “time-out” (or quit) after several seconds of “CHANNEL # TRAINED.”...
Page 159: Reprogramming A Single Homelink Button
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
Page 160: General Information
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located on the overhead Canada RSS-210. Operation is subject to the following console between the courtesy/reading lights.
Page 161: Open Sunroof - Express Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Open Sunroof — Express Mode WARNING! Press the switch rearward and release it within one-half • Never leave children alone in a vehicle. Leaving second and the sunroof will open automatically from any position.
Page 162: Closing Sunroof - Manual Mode
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automati- NOTE: If three consecutive sunroof close attempts re- cally. This is called “Express Close”. During Express sult in Pinch Protect reversals, the fourth close attempt Close operation, any movement of the switch will stop will be a Manual Close movement with Pinch Protect the sunroof.
Page 163: Sunshade Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a nonabrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
Page 164: Electrical Power Outlets
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS CAUTION! The auxiliary 12 Volt (13 Amp) power outlets can provide • Do not exceed the maximum power of 160 Watts power for in-cab accessories designed for use with the standard “cigar lighter”...
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 • Inside the upper lid of the center storage compartment The auxiliary power outlets can be found in the following locations: — if equipped. • Lower left and lower right of the center stack — without floor mounted shifter.
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Rear of the center console storage compartment — The key symbol indicates that this outlet can supply Quad Cab or Crew Cab. power when the key is in the ON/RUN or ACC posi- tions.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 168: Cigar Lighter And Ash Receiver - If Equipped
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF CAUTION! EQUIPPED • Many accessories that can be plugged in draw A removable ash receiver and cigar lighter are available. For vehicles with a bench seat the cupholder tray can be power from the vehicle’s battery, even when not in used to hold the ash receiver.
Page 169: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 For vehicles equipped with an optional floor shifter. POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watts Maximum) outlet is located on the center stack of the instrument panel, to the right of the radio.
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE manually press the power inverter button OFF and ON. The power inverter switch is located To avoid overloading the circuit, check the power ratings on the switch bank below the Climate on electrical devices prior to using the inverter. Controls.
Page 171: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 WARNING! To avoid serious injury or death: • Do not use a three-prong adapter. • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. •...
Page 172: Front Instrument Panel Cupholders - Floor Mounted Shifter
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Instrument Panel Cupholders — Floor Rear Cupholder — Quad Cab Mounted Shifter Quad Cab vehicles may be equipped with a rear cup- For vehicles equipped with bucket seats and a floor holder that consists of two cup wells for rear passenger mounted shifter there are two cupholders located in the convenience.
Page 173: Rear Cupholder - Crew Cab
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Rear Cupholder — Crew Cab STORAGE Crew Cab vehicles are equipped with rear cupholders Glove Box Storage located in the center armrest. The glove box is located on the passenger side of the instrument panel and features both an upper and lower storage area.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove box push upward on the handle To open the lower glove box, pull on the handle to release release. The glove box door will automatically open. the latch and lower the door. Upper Glove Box Lower Glove Box...
Page 175: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Door Storage Rear Door Storage — Crew Cab Storage compartments are located in both the driver and Front Door Storage — If Equipped passenger door trim panels. Storage areas and bottle holders (drivers side only) are located in the door trim panels.
Page 176: Center Storage Compartment - If Equipped
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped WARNING! The center storage compartment is located between the • This armrest is not a seat. Anyone seated on the driver and passenger seats. The storage compartment provides an armrest and contains both and upper and armrest could be seriously injured during vehicle lower storage area.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Pull on the upper handle on the front of the armrest to With the upper lid closed, pull on the lower handle to raise the cover. The upper storage area contains a 12 Volt open the lower storage bin.
Page 178: Second Row In-Floor Storage Bin - If Equipped
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury.
Page 179: Seatback Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 NOTE: The front seat may have to be moved forward to Seatback Storage fully open the lid. Located in the back of both the driver and passenger front seats are pockets that can be used for storage. Opened Storage Bin Drivers Side Seatback Storage...
Page 180: Storage (Regular Cab)
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage (Regular Cab) Storage and Seats (Crew Cab) The storage bin is located behind the front seats and runs The Crew Cab models provide additional storage under the length of the cab. the rear seats. Lift the seats to access the storage com- partment.
Page 181: Plastic Grocery Bag Retainers (Regular Cab Models)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 CAUTION! Always lift the storage compartment lids by using the handle. Failure to lift the lids by using the handle can result in damage to the lids. Plastic Grocery Bag Retainers (Regular Cab Models) Retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind...
Page 182: Rear Window Features
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to The rear window defroster button is located on the the heating elements: climate control panel. Press this button to turn on •...
Page 183: Power Sliding Rear Window - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Power Sliding Rear Window — If Equipped Manual Sliding Rear Window — If Equipped The switch for the power sliding rear window is located A locking device in the center of the window helps to on the overhead console.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding the Load Floor 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor In Open Position 3. Reverse the procedure to store the load floor. Positioning the Load Floor for Storage Access Under Unfolding The Load Floor the Seat 2.
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 2. Unsnap the securing snap located at either side of the load floor. 3. Lift the load floor up to access storage under the load floor. WARNING! Do not drive with the load floor in the up position. When stopping fast or in an accident, the load floor could move to the down position causing serious injury.
Page 186: Rambox - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE RAMBOX — IF EQUIPPED The RamBox system is an integrated pickup box storage and cargo management system consisting of three fea- tures: • Integrated box side storage bins • Cargo extender/divider • Bed rail tie-down system RamBox Integrated Box Side Storage Bins Cargo storage bins are located on both sides of the pickup box.
Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 CAUTION! Failure to follow the following items could cause damage to the vehicle: • Assure that all cargo inside the storage bins is properly secured. • Do not exceed cargo weight rating of 150 lb (68 kg) per bin.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The interior of the RamBox will automatically illumi- CAUTION! nate when the lid is opened. In addition to the automatic illumination switch, there is a manual on/off switch Leaving the lid open for extended periods of time located at the rear of each storage bin.
Page 189: Rambox Safety Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 RamBox Safety Warning CAUTION! (Continued) Carefully follow these warnings to help prevent personal • Loads applied to the top of the bin lid should be injury or damage to your vehicle: minimized to prevent damage to the lid and latching/hinging mechanisms.
Page 190: Bed Extender - If Equipped
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE RamBox Storage Bin Cover Emergency Release NOTE: In the event of an individual being locked inside Lever — If Equipped the storage bin, the storage bin cover can be opened from As a security measure, a Storage Bin Cover Emergency inside of the bin by pulling on the glow-in-the-dark lever Release is built into the storage bin cover latching mecha- attached to the storage bin cover latching mechanism.
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 To install the bed extender into the storage position, perform the following: 1. Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the extender side gates. Center Handle And Lock 1 —...
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. With the side gates open, position the extender fully 3. Rotate the side gates closed allowing the outboard forward in the bed against the front panel. ends to be positioned in front of the cargo tie down loops. Storage Position Cargo Tie Down Loop...
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 4. Rotate the center handle horizontally to secure the side Divider Position gates in the closed position. The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed.
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into a divider position per- 2. With the side gates open, position the extender so the form the following: outboard ends align with the intended slots in the sides of the bed.
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 4. Rotate the center handle horizontally to secure the side Extender Position gates in the closed position. The extender position allows you to load the bed of the truck beyond the tail gate. The bed extender will add an additional 15 in (38 cm) in the back of the truck when additional cargo room is needed.
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into the extender position perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the extender side gates.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 4. Rotate the handles to the horizontal position to secure WARNING! into place. To reduce the risk of potential injury or property damage: • Cargo must be secured. • Do not exceed cargo load rating of your vehicle. •...
Page 198: Bed Rail Tie-Down System
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs (113 kg) and the angle of the load on each cleat should not exceed 60 degrees above horizontal, or damage to the cleat or cleat rail may occur.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 out on the cleat and slide it to the detent nearest the To remove the cleats from the utility rail, remove the end desired location. Make sure the cleat is seated in the cap by pushing up on the locking tab, located on the detent and tighten the nut.
Page 200: Slide-In Campers
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SLIDE-IN CAMPERS Disconnecting the Rear Camera — If Equipped Camper Applications 1. Open the tailgate to access the rear camera connector Certain truck models are not recommended for slide-in bracket located on the rear sill. campers.
Page 201: Removing The Tailgate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 2. Remove the connector bracket from the sill by press- 4. Connect the chassis plug and bracket (provided in the ing inward in the locking tab. glove box) to the chassis wiring harness and insert the bracket back into the sill.
Page 202: Locking Tailgate
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Make sure tailgate is supported when removing 5. Slide the entire tailgate to the right to free the left side support cables. pivot. 6. Remove the tailgate from the vehicle. NOTE: Do not carry the tailgate loose in the truck pickup box.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ EVIC Displays ..... . 229 Instrument Panel Features ....205 ▫...
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Customer-Programmable Features (System Media Center 130 With Satellite Radio (Sales Setup) ......242 Code RES+RSC) .
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 203 ▫ Using This Feature ....276 Video Entertainment System (VES)™ — If Equipped ......286 ▫...
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Winter Operation ....300 ▫ Outside Air Intake ....301 ▫...
Page 207: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 205 INSTRUMENT PANEL FEATURES 1 — Headlight Switch 7 — 115v Power Inverter Outlet 13 — Transfer Case Position Switch 2 — Instrument Cluster 8 — Power Outlet 14 — Ignition Switch 3 — Radio 9 — Lower Switch Bank 15 —...
Page 208: Switch Bank Button Description
206 UNDERSTANDING YOUR INSTRUMENT PANEL SWITCH BANK BUTTON DESCRIPTION 2. ESC OFF Refer to “Starting And Operating” for more information. Upper Switch Bank 3. HAZARD WARNING FLASHER The upper switch bank is located on the center of the Refer to “What To Do In Emergencies” for more infor- instrument panel.
Page 209: Lower Switch Bank
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Lower Switch Bank 2. VENTILATED SEATS Refer to “Understanding The Features Of Your Vehicle” The lower switch bank is located on the center of the for more information. instrument panel. 3. HEATED STEERING WHEEL Refer to “Understanding The Features Of Your Vehicle” for more information.
Page 210: Instrument Cluster - Base
208 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — BASE...
Page 211: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 209 INSTRUMENT CLUSTER — PREMIUM...
Page 212: Instrument Cluster Descriptions
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Check for an inoperative outside light bulb if either INSTRUMENT CLUSTER DESCRIPTIONS indicator remains on and does not flash, or flashes at a 1. Tachometer rapid rate. The tachometer indicates engine speed in Revolutions Per Minute (RPM x 1000).
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 CAUTION! WARNING! Driving with a hot engine cooling system could A hot engine cooling system is dangerous. You or damage your vehicle. If the temperature gauge reads others could be badly burned by steam or boiling “H”...
Page 214 212 UNDERSTANDING YOUR INSTRUMENT PANEL rotate at the same speed. Low range provides a greater If the light remains lit with the engine running, your gear reduction ratio to provide increased torque at the vehicle will usually be drivable; however, see an autho- wheels.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 9. 4WD Auto Indicator 11. TOW/HAUL The 4WD auto indicator will be illuminated The TOW HAUL button is located on the whenever the four-wheel drive mode is auto- center stack upper switch bank. This light will matically engaged.
Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: 14. Oil Pressure Gauge • The “ESC Off Indicator Light” and the “ESC The pointer should always indicate some oil pressure Activation/Malfunction Indicator Light” come on mo- when the engine is running. A continuous high or low mentarily each time the ignition switch is turned to reading under normal driving conditions may indicate a ON/RUN.
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 215 16. Odometer Display / Electronic Vehicle Information The two trip odometers show individual trip mileage. To Center (EVIC) Display Area — If Equipped switch from odometer to trip odometers, press and release the TRIP ODOMETER button. Odometer Display The odometer display shows the total distance the ve- To reset a trip odometer, display the desired trip odom-...
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL perform the following: Place the ignition in the ON/ Odometer / Trip Odometer / ECO (Fuel Saver Indicator) RUN, but do not start the engine. With the odometer button to change the display from odometer to either of value displayed, hold the TRIP button down for a period the two trip odometer settings or the “ECO”...
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 noFUSE position. To turn off the message temporarily, press and If the vehicle diagnostic system determines that the release the Trip Odometer button on the instrument Ignition Off Draw (IOD) fuse is improperly installed, or cluster.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL single chime will sound after reaching a set threshold. 18. Shift Lever Indicator Further overheating will cause the temperature gauge to The Shift Lever Indicator is self-contained within the pass H, the indicator will continuously flash and a instrument cluster.
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Center (EVIC). Refer to ”Electronic Vehicle Information cycling operation is controlled by the engine control Center (EVIC) — If Equipped” for further information. module. Post-heat operation can run for several minutes, and then the electrical system and voltmeter needle will 20.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL master cylinder reservoir, it indicates a possible brake NOTE: The light may flash momentarily during sharp hydraulic system malfunction or that a problem with the cornering maneuvers, which change fluid level condi- Brake Booster has been detected by the Anti-Lock Brake tions.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 Operation of the Brake Warning Light can be checked by Do not operate the vehicle until the cause is corrected. turning the ignition switch from the OFF position to the This light does not indicate how much oil is in the engine. ON/RUN position.
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been operating properly. The TPMS malfunction indicator is equipped with a Tire Pressure Monitoring System combined with the low tire pressure telltale. When the (TPMS) that illuminates a low tire pressure telltale when system detects a malfunction, the telltale will flash for one or more of your tires is significantly under-inflated.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 26. Malfunction Indicator Light (MIL) CAUTION! The Malfunction Indicator Light (MIL) is part of an onboard diagnostic (OBDII) system which The TPMS has been optimized for the original monitors the emissions and engine control sys- equipment tires and wheels.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL Although your vehicle will usually be drivable and not WARNING! need towing, see your authorized dealer for service as soon as possible. A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal CAUTION! operating conditions.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 28. Front Fog Light Indicator — If Equipped 30. Transmission Temperature Warning Light This indicator will illuminate when the front fog This light indicates that there is excessive trans- lights are on. mission fluid temperature that might occur with severe usage such as trailer towing.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL belt remains unbuckled, the seat belt reminder light will WARNING! flash or remain on continuously. Refer to “Occupant Restraints” in “Things To Know Before Starting Your If the Transmission Temperature Warning Light is Vehicle” for further information. illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to 32.
Page 229: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 227 For vehicles equipped with a premium cluster this indi- cator will display in the Electronic Vehicle Information Center (EVIC). Refer to ”Electronic Vehicle Information Center (EVIC) — If Equipped” for further information. 33. Electronic Stability Control (ESC) OFF Indicator Light —...
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL This system conveniently allows the driver to select a Steering wheel EVIC control button, as variety of useful information by pressing the switches it appears on the left side of the steer- mounted on the steering wheel. The EVIC consists of the ing wheel.
Page 231: Evic Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 229 • Right front turn signal lamp out Steering wheel EVIC control button, as it appears on the right side of the • Left rear turn signal lamp out steering wheel. • Right rear turn signal lamp out •...
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL • Lights On • Park Assist On • Keyfob Battery Low • Park Assist Off • ECO (Fuel Saver Indicator) — If Equipped • Warning Object Detected • Door(s) Ajar (with a single chime, if vehicle is in •...
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 • Remote start aborted — Fuel low • Adjustable Pedals Unavailable — Cruise Engaged • Remote start disabled — System fault • To Tow Vehicle Safely, Read Neutral Shift Procedure in Owners Manual • Remote start disabled — Turn key EVIC Warning Lights •...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL • Electronic Speed Control Light Do not operate the vehicle until the cause is corrected. This light does not show how much oil is in the engine. This light will turn on when the electronic The engine oil level must be checked under the hood.
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 If the light remains lit with the engine running, your shift the transmission into NEUTRAL and idle the ve- vehicle will usually be drivable. However, see an autho- hicle. If the temperature reading does not return to rized dealer for service as soon as possible.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL • Transmission Temperature Light WARNING! This light indicates that there is excessive trans- mission fluid temperature that might occur If the Transmission Temperature Warning Light is with severe usage such as trailer towing. It may illuminated and you continue operating the vehicle, also occur when operating the vehicle in a high in some circumstances you could cause the fluid to...
Page 237: Fuel Economy / Fuel Saver Mode / Distance To Empty (Dte) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Oil Change Due 2. Fully depress the accelerator pedal slowly three times Your vehicle is equipped with an engine oil change within 10 seconds. indicator system. The Oil Change Due message will 3. Turn the ignition switch to the OFF position. flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next NOTE: If the indicator message illuminates when you...
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL will appear whenever the Multi-Displacement System Distance To Empty (DTE) (MDS) (if equipped) allows the engine to operate on four Distance To Empty (DTE) Shows the estimated distance cylinders, or if you are driving in a fuel efficient manner. that can be traveled with the fuel remaining in the tank.
Page 239: Trip Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 237 • Trip B Trip Functions Press and release the ODOMETER/TRIP ODOMETER Shows the total distance traveled for Trip B since the last button until one of the following Trip Functions displays reset. in the EVIC: •...
Page 240: Vehicle Info (Customer Information Features)
238 UNDERSTANDING YOUR INSTRUMENT PANEL • Engine Hours Vehicle Info (Customer Information Features) Press and release the UP or DOWN button until “Vehicle Displays the number of hours of engine operation. Info” displays in the EVIC and press the SELECT button. •...
Page 241: Units
UNDERSTANDING YOUR INSTRUMENT PANEL 239 to “Tires-General Information/Tire Inflation Pres- sures” in “Starting And Operating” for additional information. • Your system can be set to display pressure units in PSI, kPa, or BAR. Units Press and release the UP or DOWN button until “Units” displays in the EVIC and press the SELECT button.
Page 242: Compass / Temperature Display
240 UNDERSTANDING YOUR INSTRUMENT PANEL Compass / Temperature Display temperature sensor caused by the snowplow. In addi- tion, on vehicles equipped with Automatic Tempera- The compass readings indicate the direction the vehicle is ture Control (ATC), it is suggested that the interior facing.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 NOTE: A good calibration requires a level surface and 4. Press and release the SELECT button to start the an environment free from large metallic objects such as calibration. The “CAL” indicator will be displayed in the buildings, bridges, underground cables, railroad tracks, EVIC.
Page 244: Customer-Programmable Features (System Setup)
242 UNDERSTANDING YOUR INSTRUMENT PANEL Laptops and Radar Detectors. This is where the compass 2. Press the UP or DOWN button until the System Setup module is located, and it can cause interference with the (Customer-Programmable Features) menu is reached, compass sensor, and it may give false readings.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Press and release the UP or DOWN button until System route, mile by mile, turn-by-turn until the final destina- Setup displays in the EVIC. tion is reached. To make your selection, press and release the SELECT button until a check-mark appears next to Use the UP or DOWN button to display one of the the feature showing the system has been activated or the following choices.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Lock Doors Remote Unlock Sequence When this feature is selected, all doors will lock auto- When Unlock Driver Door Only On 1st Press is selected, matically when the vehicle reaches a speed of 15 mph only the driver’s door will unlock on the first press of the (24 km/h).
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 position using the seat mounted switch. To make your Horn With Remote Start selection, press and release the SELECT button until a When this feature is selected, a short horn sound will check-mark appears next to the feature showing the occur when the RKE transmitter REMOTE START button system has been activated or the check-mark is removed is pressed.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL Flash Lamps With Lock Headlamps With Wipers When this feature is selected, the front and rear turn When this feature is selected and the HEADLIGHT signals will flash when the doors are locked or unlocked switch is in the AUTO position, the headlights will turn with the RKE transmitter.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 been deactivated. When this feature is deactivated, the Tilt Mirror In Reverse system reverts to the standard intermittent wiper When this feature is selected and the shift lever is placed operation. in reverse gear, the side mirrors tilt downward to allow the driver to see into the previous blind spot and avoid Easy Exit Seat —...
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL highlighted, then press and release the SELECT button feature showing the system has been activated or the until a check-mark appears next to the setting, showing check-mark is removed showing the system has been that the setting has been selected. deactivated.
Page 251: Media Center 730N/430/430N
UNDERSTANDING YOUR INSTRUMENT PANEL 249 MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ MEDIA CENTER 130 (SALES CODE RES) RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The radio sales code is located on the lower right NOTE: The sales code is located on the lower right side side of the radio faceplate.
Page 252: Operating Instructions - Radio Mode
250 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL knob to save time change. control knob to the right or left to increase or decrease the mid-range tones.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to SET 2 in both AM and FM. This allows a total of 12 AM exit setting tone, balance, and fade. and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by AM/FM Button pressing the pushbutton twice.
Page 255: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD the current selection. Pressing and holding the SEEK Press the EJECT button to eject the CD. button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 257: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 255 SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the • Level 1: 12 (including a separator . and a three- following table are supported.
Page 259: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended supported. to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option Playback of MP3 Files before writing to the disc.
Page 260: Media Center 130 With Satellite Radio (Sales Code Res+Rsc)
258 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 Power Switch/Volume Control (Rotary) Voice Command System (Radio) — If Equipped Push the ON/VOLUME control knob to turn on the Refer to “Voice Command” in the Uconnect™ User radio. Push the ON/VOLUME control knob a second Manual located on the DVD for further details.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a “Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone”...
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button 16-Digit Character Program Type Pressing this button once will turn on the Music Type Display mode for five seconds. Pressing the MUSIC TYPE button Foreign Language Language or turning the TUNE/SCROLL control knob within five Information Inform seconds will allow the program format type to be se-...
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 SETUP Button 16-Digit Character Program Type Pressing the SETUP button allows you to select between Display the following items: Sports Sports • Set Clock — Pressing the SELECT button will allow Talk Talk you to set the clock. Adjust the hours by turning the Top 40 Top 40 TUNE/SCROLL control knob.
Page 266: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
264 UNDERSTANDING YOUR INSTRUMENT PANEL window. Select the button (1–6) you wish to lock onto this Buttons 1 - 6 station and press and release that button. If a button is These buttons tune the radio to the stations that you not selected within five seconds after pressing the SET/ commit to pushbutton memory (12 AM and 12 FM RND button, the station will continue to play but will not...
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 Inserting Compact Disc(s) CAUTION! (Continued) Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel label facing up. The CD will automatically be pulled into away and jam the player mechanism.
Page 268: Notes On Playing Mp3 Files
266 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button convertible or soft-top models (if equipped). Press the button to select either AM or FM mode. SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD.
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems)
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 271: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Loading times for playback of MP3 files may be affected begin playing the files contained in that folder (or the by the following: next folder in sequence if the selection does not contain playable files). •...
Page 272: Uconnect™ Multimedia (Satellite Radio) - If Equipped
270 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode Uconnect™ Multimedia (Satellite Radio) — If The auxiliary (AUX) jack is an audio input jack which Equipped allows the user to plug in a portable device such as an Satellite radio uses direct satellite-to-receiver broadcast- MP3 player or cassette player and utilize the vehicle’s ing technology to provide clear digital sound, coast to audio system to amplify the source and play through the...
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on .siriuscanada.ca for Canadian residents.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 276: Operating Instructions (Uconnect™ Phone) - If Equipped
274 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Every time a preset button is used, a corresponding When you are receiving a channel that you wish to button number will display. commit to pushbutton memory, press the SET button. Buttons 1 - 6 The symbol SET 1 will now show in the display window.
Page 277: Connecting The Ipod
UNDERSTANDING YOUR INSTRUMENT PANEL 275 This feature allows an iPod to be plugged into the Connecting The iPod vehicle’s sound system through a 16–pin connector, using Use the provided connection cable to connect an iPod to the provided interface cable. the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles).
Page 278: Using This Feature
276 UNDERSTANDING YOUR INSTRUMENT PANEL Using This Feature faceplate. Once in the iPod control mode, iPod audio By using the provided connection cable to connect an tracks (if available from iPod ) start playing over the iPod to the vehicle’s iPod control 16–pin connector vehicle’s audio system.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 • Jump backward in the current track by pressing and • While a track is playing, press the INFO button to see holding the << RW button. Holding the << RW the associated metadata (artist, track title, album, etc.) button long enough will jump to the beginning of for that track.
Page 280: List Or Browse Mode
278 UNDERSTANDING YOUR INSTRUMENT PANEL Shuffle OFF modes for the iPod . If the RND icon is fast will scroll through the list faster. During fast showing on the radio display, then the shuffle mode is scroll, a slight delay in updating the information on the radio display may be noticed.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on • Leaving the iPod (or any supported device) any- the second line. where in the vehicle in extreme heat or cold can •...
Page 282: Ipod /Usb/Mp3 Control - If Equipped
280 UNDERSTANDING YOUR INSTRUMENT PANEL iPod /USB/MP3 CONTROL — IF EQUIPPED NOTE: • If the radio has a USB port, refer to the appropriate NOTE: This section is for sales code RES and REQ/ Uconnect™ Multimedia radio User’s Manual for REL/RET radios only with Uconnect™.
Page 283: Using This Feature
UNDERSTANDING YOUR INSTRUMENT PANEL 281 NOTE: If the audio device battery is completely dis- charged, it may not communicate with the iPod /USB/ MP3 control system until a minimum charge is attained. Leaving the audio device connected to the iPod /USB/ MP3 control system may charge it to the required level.
Page 284: Controlling The Ipod Or External Usb Device Using Radio Buttons
282 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it clockwise (forward) by one click, while Controlling The iPod Or External USB Device Using Radio Buttons playing a track, skips to the next track or press the To get into the iPod /USB/MP3 control mode and access VR button and say Next Track .
Page 285: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 283 during play mode will jump to the next track in the SCAN button again. During Scan mode, pressing the list, or press the VR button and say Next or Previous << SEEK and SEEK >> buttons will select the previ- Track .
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it clockwise (forward) and counterclock- • Preset 2 – Artists wise (backward) scrolls through the lists, displaying • Preset 3 – Albums the track detail on the radio display. Once the track • Preset 4 – Genres to be played is highlighted on the radio display, press the TUNE control knob to select and start •...
Page 287: Bluetooth Streaming Audio (Btsa)
UNDERSTANDING YOUR INSTRUMENT PANEL 285 device, then follow the same steps to go to the desired WARNING! track in that list. Not all iPod or external USB device sub-menu levels are available on this system. Do not plug in or remove the iPod or external USB device while driving.
Page 288: Video Entertainment System (Ves)™ - If Equipped
286 UNDERSTANDING YOUR INSTRUMENT PANEL phone system. Seven devices can be paired to the Previous Track Uconnect™ phone system, but just one can be selected Use the SEEK DOWN button, or press the VR button on and played. the radio and say “Previous Track” to jump to the previous track music on your cellular phone.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 • Easy menu-driven functions on touch-screen radios • Video and audio input jacks available in rear seating area • Nine different medias to choose from in each screen (AM, FM, Sirius Radio, DVD1, DVD2, Hard Disc Drive (HDD), AUX in radio, AUX1, AUX2) The LCD screen is located in the overhead compartment console.
Page 290: Steering Wheel Audio Controls - If Equipped
288 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. VES™ Remote Control Location NOTE: Refer to the “Uconnect™ Multimedia” section of Uconnect™...
Page 291: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 289 The right hand control is a rocker type switch with a The button located in the center of the left hand control pushbutton in the center. Pressing the top of the switch will tune to the next pre-set station that you have will increase the volume, and pressing the bottom of the programmed in the radio pre-set pushbuttons.
Page 292: Cd/Dvd Disc Maintenance
290 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.
Page 293: Manual Heating And Air Conditioning System
UNDERSTANDING YOUR INSTRUMENT PANEL 291 throughout the vehicle. The controls are located on the dials and inner push knobs. These comfort controls can instrument panel below the radio. be set to obtain desired interior conditions. NOTE: During snowplow usage on vehicles equipped with outside temperature display, the display may show higher temperatures than the outside ambient tempera- ture.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control temperatures. Rotating the knob clockwise, into the red There are four blower speeds. Use this area, indicates warmer temperatures. control to regulate the amount of air NOTE: If your air conditioning performance seems forced through the system in any lower than expected, check the front of the A/C con- mode you select.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 Panel Mode Mix Mode Air is directed through the outlets in the instrument Air is directed through the floor, defrost and side panel. These outlets can be adjusted to direct airflow. window demist outlets. This setting works best in cold or snowy conditions that require extra heat at Bi-Level Mode the windshield.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL • In cold or damp weather, the use of the Recirculation Recirculation Control Press this button to choose between mode will cause windows to fog on the inside because outside air intake or recirculation of of moisture buildup inside the vehicle.
Page 297: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 295 Economy Mode MAX A/C If ECONOMY mode is desired, press the A/C button to For maximum cooling, when MAX turn off the LED indicator and the A/C compressor. A/C is selected the A/C is turned on Rotate the temperature control knob to the desired automatically and the air is recircu- temperature.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL • When occupants in the vehicle select an Auto mode operation, Auto blower operation is set by using rotary knobs on the control unit and a comfort temperature setting by using the temperature up and down but- tons.
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 Automatic Operation NOTE: • It is not necessary to move the temperature settings for 1. Position the MODE control knob to the Auto position cold or hot vehicles. The system automatically adjusts on the Automatic Temperature Control (ATC) Panel. the temperature, mode and fan speed to provide 2.
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation selected. This allows the front occupants to control the This system offers a full complement of manual override volume of air circulated in the vehicle and cancel the features. Auto mode. NOTE: Each of these features operate independently The operator can also select the direction of the airflow from each other.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 Floor Mode The Air Conditioning (A/C) button allows the Air comes from the floor outlets. A slight amount of operator to manually activate or deactivate the air air is directed through the defrost and side window conditioning system.
Page 302: Summer Operation
300 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation mode should only be used temporarily. The Summer Operation recirculation LED will illuminate on the blower control The engine cooling system in air conditioned vehicles knob when this button is selected. Push the button a must be protected with a high-quality antifreeze coolant second time to turn off the Recirculation mode LED and to provide proper corrosion protection and to protect...
Page 303: Outside Air Intake
UNDERSTANDING YOUR INSTRUMENT PANEL 301 Vacation/Storage Outside Air Intake Any time you store your vehicle or keep it out of service Make sure the air intake, located directly in front of the (i.e., vacation) for two weeks or more, run the air windshield, is free of obstructions such as leaves.
Page 304: Operating Tips
302 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips...
Page 305 STARTING AND OPERATING CONTENTS ▫ Key Ignition Park Interlock ... . . 313 Starting Procedures ....309 ▫...
Page 306 304 STARTING AND OPERATING ▫ Shifting Procedure – Manually Shifted ▫ Off-Road Driving Tips And Vehicle Transfer Case ..... . . 328 Characteristics .
Page 307 STARTING AND OPERATING 305 ▫ Power Steering Fluid Check ... . . 391 Driving Through Water ....366 ▫...
Page 308 306 STARTING AND OPERATING ▫ ESC Activation/Malfunction Indicator Light ▫ Spare Tire Matching Original Equipped Tire And ESC Off Indicator Light ... . 403 And Wheel – If Equipped ....419 ▫...
Page 309 STARTING AND OPERATING 307 ▫ Directional Tires – If Equipped ... 429 ▫ E-85 Usage In Non-Flex Fuel Vehicles ..445 ▫ Dual Rear Wheels ....429 ▫...
Page 310 308 STARTING AND OPERATING ▫ Replacement Parts ....451 ▫ Towing Requirements ....463 ▫...
Page 311: Starting Procedures
STARTING AND OPERATING 309 STARTING PROCEDURES pedal. Turn the key fob to the START position and release Before starting your vehicle, adjust your seat, adjust both when the engine starts. If the engine fails to start within inside and outside mirrors, and fasten your seat belt. 10 seconds, turn the key fob to the OFF position, wait five seconds, then repeat the “Normal Starting”...
Page 312: Extreme Cold Weather (Below -20°F Or 29°C)
310 STARTING AND OPERATING Extreme Cold Weather (Below –20°F or 29°C) WARNING! To ensure reliable starting at these temperatures, use of • Never pour fuel or other flammable liquids into an externally powered electric engine block heater (avail- able from your authorized dealer) is recommended. the throttle body air inlet opening in an attempt to start the vehicle.
Page 313: After Starting
STARTING AND OPERATING 311 If the engine has been flooded, it may start to run, but not 1500 Models have enough power to continue running when the key The engine block heater cord is routed under the hood on fob is released. If this occurs, continue cranking with the the passenger side of the vehicle near the right head lamp accelerator pedal pushed all the way to the floor.
Page 314: Automatic Transmission
312 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Do not shift from REVERSE, PARK, or NEUTRAL Remember to disconnect the engine block heater into any forward gear when the engine is above cord before driving. Damage to the 110-115 Volt idle speed.
Page 315: Key Ignition Park Interlock
STARTING AND OPERATING 313 Key Ignition Park Interlock Four–Speed Automatic Transmission – If This vehicle is equipped with a Key Ignition Park Inter- Equipped lock which requires the shift lever to be placed in PARK NOTE: Under extremely cold temperatures (-6°F (-21°C) prior to turning the key fob to the LOCK position.
Page 316 314 STARTING AND OPERATING Gear Ranges WARNING! Do not race the engine when shifting from PARK or • Never use the PARK position as a substitute for NEUTRAL position into another gear range. the parking brake. Always apply the parking PARK brake fully when parked to guard against vehicle This range supplements the parking brake by locking the...
Page 317 STARTING AND OPERATING 315 NEUTRAL WARNING! (Continued) This range is used when the vehicle is standing for • Unintended movement of a vehicle could injure prolonged periods with the engine running. The engine those in and near the vehicle. As with all vehicles, may be started in this range.
Page 318 316 STARTING AND OPERATING transmission will automatically shift from third gear to If the transmission temperature gets extremely hot, the OVERDRIVE if the following conditions are present: transmission will automatically select the most desirable gear for operation at this temperature. If the transmission •...
Page 319 STARTING AND OPERATING 317 operating in TOW/HAUL mode, the transmission will normal operation. If the TOW/HAUL mode is desired, shift to third gear and fourth gear will be enabled under the switch must be pressed each time the engine is steady cruise conditions.
Page 320: Five-Speed Automatic Transmission - If Equipped
318 STARTING AND OPERATING 5. Move the shift lever to the desired gear range. Five–Speed Automatic Transmission – If Equipped If the problem is no longer detected, the transmission will The shift lever display located in the instrument panel return to normal operation. If the problem persists, cluster indicates the transmission gear range.
Page 321 STARTING AND OPERATING 319 into 3 (third gear), the transmission will never shift above third gear, but can shift down to 2 (second gear) or 1 (first gear), when needed. Console Shift Lever On vehicles equipped with 4.7L or 5.7L engines, use of ERS (or TOW/HAUL mode) also enables an additional underdrive gear which is not normally used during Column Shift Lever...
Page 322 320 STARTING AND OPERATING through third gear are underdrive gears, and fourth gear WARNING! is direct drive. ERS fifth gear (Overdrive) is the same as the normal fourth gear. Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their When in the DRIVE position in first through fourth gear, grip and the vehicle could skid.
Page 323 STARTING AND OPERATING 321 Gear Ranges WARNING! (Continued) Do not race the engine when shifting from PARK or • Your vehicle could move and injure you and others NEUTRAL position into another gear range. if it is not completely in PARK. Check by trying to PARK move the shift lever back and forth without first This range supplements the parking brake by locking the...
Page 324 322 STARTING AND OPERATING REVERSE WARNING! (Continued) This range is for moving the vehicle rearward. Use this • Unintended movement of a vehicle could injure range only after the vehicle has come to a complete stop. those in and near the vehicle. As with all vehicles, NEUTRAL you should never exit a vehicle while the engine is This range is for when the vehicle is standing for pro-...
Page 325 STARTING AND OPERATING 323 Overdrive Operation operation at this temperature. Normal operation will The Overdrive automatic transmission contains an elec- resume when the transmission fluid temperature has tronically controlled fourth and fifth gear (Overdrive). risen to a suitable level. The transmission will automatically shift from DRIVE to If the transmission temperature gets extremely hot, the Overdrive if the following conditions are present: transmission will automatically select the most desirable...
Page 326 324 STARTING AND OPERATING performance and reduce the potential for transmission closed-throttle downshifts to third gear are performed overheating or failure due to excessive shifting. When (for improved braking) when driving conditions warrant. operating in the TOW/HAUL mode, fifth gear is dis- The “TOW/HAUL Indicator Light”...
Page 327: Four-Wheel Drive Operation - If Equipped
STARTING AND OPERATING 325 NOTE: FOUR-WHEEL DRIVE OPERATION — IF • The torque converter clutch will not engage until the EQUIPPED transmission fluid and engine coolant (antifreeze) are Four-wheel drive trucks are equipped with either a warm [usually after 1 to 3 miles (1.6 to 4.8 km) of manually shifted transfer case or an electronically shifted driving].
Page 328 326 STARTING AND OPERATING When additional traction is required, the 4H and 4L at a given road speed. Take care not to overspeed the positions can be used to lock the front and rear drive- engine and do not exceed 25 mph (40 km/h). shafts together and force the front and rear wheels to Proper operation of four-wheel drive vehicles depends rotate at the same speed.
Page 329 STARTING AND OPERATING 327 NOTE: Delayed shifts out of four-wheel drive may be For additional information on the appropriate use of each experienced due to uneven tire wear, low or uneven tire transfer case mode position, see the information below: pressures, excessive vehicle loading, or cold tempera- tures.
Page 330: Starting And Operating
328 STARTING AND OPERATING 2H Or 4H ⇔ 4L Four-Wheel Drive Low Range - This range locks the front With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift and rear driveshafts together forcing the front and rear the transmission into NEUTRAL.
Page 331: Transfer Case Position Indicator Light
STARTING AND OPERATING 329 method is with the vehicle rolling 2 to 3 mph (3 to Electronically Shifted Transfer Case 5 km/h). Avoid attempting to engage or disengage 4L (Four-Position Switch) – If Equipped with the vehicle moving faster than 2 to 3 mph (3 to This is an electronic shift transfer case and is operated by 5 km/h).
Page 332 330 STARTING AND OPERATING This electronically shifted transfer case provides four section for specific shifting instructions. The 4WD LOCK mode positions: and 4WD LOW positions are designed for loose, slippery road surfaces only. Driving in the 4WD LOCK and 4WD •...
Page 333 STARTING AND OPERATING 331 If All Shift Conditions Are Met: the control knob back to the current position, wait five seconds, and retry selection. To find the shift require- 1. The current position indicator light will turn OFF. ments, refer to the Shifting Procedure for your transfer 2.
Page 334 332 STARTING AND OPERATING NOTE: Do not attempt to make a shift while only the WARNING! front or rear wheels are spinning, as this can cause damage to driveline components. You or others could be injured if you leave the vehicle unattended with the transfer case in the When operating your vehicle in 4WD LOW, the engine NEUTRAL position without first fully engaging the...
Page 335: Shifting Procedure
STARTING AND OPERATING 333 4WD LOCK Shifting Procedure Four-Wheel Drive Lock Range - This range locks the front NOTE: and rear driveshafts together forcing the front and rear • If any of the requirements to select a new transfer case wheels to rotate at the same speed.
Page 336 334 STARTING AND OPERATING 2WD⇔ 4WD LOCK 2WD Or 4WD LOCK⇔ 4WD LOW Rotate the 4WD control switch to the desired position. NOTE: When shifting into or out of 4WD LOW some Shifts between 2WD and 4WD LOCK can be done with gear noise may be heard.
Page 337 STARTING AND OPERATING 335 Alternate Procedure NOTE: • If Steps 1 or 2 of either the Preferred or Alternate 1. Bring the vehicle to a complete stop. Procedure are not satisfied prior to attempting the 2. With the ignition switch in the ON position and the shift, then the desired position indicator light will flash engine either OFF or running, shift the transmission into continuously while the original position indicator light...
Page 338: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
336 STARTING AND OPERATING Electronically Shifted Transfer Case This electronically shifted transfer case provides five (Five-Position Switch) – If Equipped mode positions: This is an electronic shift transfer case and is operated by • Two-wheel drive high range (2WD) the 4WD Control Switch (Transfer Case Switch), which is •...
Page 339 STARTING AND OPERATING 337 drive will be automatically engaged when the vehicle left hand corner of the 4WD Control Switch. The transfer senses a loss of traction. Because the front axle is en- case NEUTRAL position is to be used for recreational gaged, this mode will result in lower fuel economy than towing only.
Page 340 338 STARTING AND OPERATING If One Or More Shift Conditions Are Not Met: after engine start up or illuminates during driving, it means that the four-wheel drive system is not function- 1. The indicator light for the current position will remain ing properly and that service is required.
Page 341 STARTING AND OPERATING 339 Proper operation of four-wheel drive vehicles depends For additional information on the appropriate use of each on tires of equal size, type and circumference on each transfer case mode position, see the information below: wheel. Any difference in tire size can cause damage to the drivetrain.
Page 342: Shifting Procedure
340 STARTING AND OPERATING 4WD LOW position will remain ON, and the newly selected Four-Wheel Drive Low Range - This range provides low position indicator light will continue to flash until all speed four-wheel drive. Locks the front and rear drive- the requirements for the selected position have been shafts together forcing the front and rear wheels to rotate met.
Page 343 STARTING AND OPERATING 341 the vehicle in motion, the transfer case will engage/ 2. Shift the transmission into NEUTRAL. disengage faster if you momentarily release the accelera- 3. While still rolling, rotate the transfer case control tor pedal after turning the control switch. If the vehicle is switch to the desired position.
Page 344: Axle Locker System (2500 Models Only) - If Equipped
342 STARTING AND OPERATING NOTE: wheels to spin at an equal rate. This allows the vehicle to • If Steps 1 or 2 of either the Preferred or Alternate maintain its momentum and prevents it from becoming Procedure are not satisfied prior to attempting the shift stuck.
Page 345 STARTING AND OPERATING 343 NOTE: Even when the axles are in the AXLE UNLOCK CAUTION! (Continued) position, the limited slip differential in the rear axle still • Do not try to lock the rear axle if the vehicle is provides torque biasing capability for moderate low stuck and the tires are spinning.
Page 346: Stabilizer/Sway Bar System - Power Wagon Only
344 STARTING AND OPERATING LOCK or FRONT/REAR LOCK position, drive the ve- To unlock the front axle; move the axle locker switch to hicle in a turn or on loose gravel to expedite the locking REAR LOCK. The FRONT/REAR LOCK indicator light action.
Page 347 STARTING AND OPERATING 345 Due to the use of taller springs, this vehicle has an increased ride height of approximately 1.9 in (48.3 mm) in the front and 1.5 in (38.1 mm) in the rear. A major advantage to increasing ride height is the positive effect it has on approach/departure and break over angles.
Page 348 346 STARTING AND OPERATING the Off-Road position. The amber indicator light will WARNING! flash until the stabilizer/sway bar has been fully discon- nected. Do not disconnect the stabilizer bar and drive on hard surfaced roads or at speeds above 18 mph NOTE: The stabilizer/sway bar may be torque locked (29 km/h), you may lose control of the vehicle, which due to left and right suspension height differences.
Page 349: Safe Off-Road Driving - Power Wagon Only
STARTING AND OPERATING 347 (ORV) trails or recreation areas. You should always tread WARNING! lightly and only use established roads, trails or ORV recreational areas. The National Forest Service, Bureau of If the stabilizer/sway bar will not return to On-Road Land Management or local Department of Natural Re- mode, vehicle stability is greatly reduced.
Page 350 348 STARTING AND OPERATING distance up the ramp divided by the wheelbase of the CAUTION! vehicle and multiplied by 1,000 is the RTI. This vehicle has an RTI of 655, which means you can articulate one The door sill height is 25 inches. Water may intrude front wheel 32 inches in the air while the other three into the interior of the vehicle at greater depths.
Page 351 STARTING AND OPERATING 349 your vehicle’s steering, handling and traction. Control- WARNING! ling your vehicle is one of the keys to successful off-road driving, so always keep a firm grip on the steering wheel Always wear your seat belt and firmly tie down and maintain a good driving posture.
Page 352: Driving In Snow, Mud And Sand
350 STARTING AND OPERATING Driving In Snow, Mud And Sand CAUTION! There is a drastic reduction in traction when driving in snow, mud or sand. The vehicle will be less responsive to On icy or slippery roads, do not downshift at high steering, acceleration and braking inputs.
Page 353: Crossing Obstacles (Rocks And Other High Points)
STARTING AND OPERATING 351 • Sand – Soft sand is very difficult to travel through CAUTION! with full tire pressure. When crossing soft sandy spots in a trail maintain your vehicle’s momentum and do Reduced tire pressures may cause tire unseating and not stop.
Page 354 352 STARTING AND OPERATING forward until it makes contact with the object. Apply the Crossing Large Rocks throttle lightly while holding a light brake pressure and When approaching large rocks, choose a path which ease the vehicle up and over the object. ensures you drive over the largest with your tires.
Page 355 STARTING AND OPERATING 353 independently. You need to use caution when crossing accelerator to avoid spinning the log out from under your large obstacles with steep sides. Do not attempt to cross tires. Then ease the vehicle off the log using your brakes. any large obstacle with steep sides at an angle great CAUTION! enough to put the vehicle at risk of a rollover.
Page 356: Hill Climbing
354 STARTING AND OPERATING the vehicle if something goes wrong? If everything CAUTION! looks good and you feel confident, then change trans- mission into a lower gear, shift the transfer case into 4L Winching or rocking the vehicle off hard objects (Low) and proceed with caution.
Page 357 STARTING AND OPERATING 355 fresh bite into the surface and will usually provide ability to proceed then make sure you are in 4L (Low enough traction to complete the climb. If you do not Range) with the transmission in first gear (manually make it to the top, place the vehicle in REVERSE and select first gear on automatic transmissions) and pro- back straight down the grade using engine resistance...
Page 358: Driving Through Water
356 STARTING AND OPERATING sure the surface has good traction with firm and stable WARNING! soils. If possible transverse the incline at an angle heading slightly up or down. If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never WARNING! attempt to turn around.
Page 359 STARTING AND OPERATING 357 your vehicle’s abilities and be able to recover it if CAUTION! something goes wrong. You should never stop or shut a vehicle off when crossing deep water unless you ingested Water ingestion into the axles, transmission, transfer water into the engine air intake.
Page 360 358 STARTING AND OPERATING crossing is the water depth, current and bottom con- CAUTION! ditions. On soft bottoms the vehicle will sink in, effectively increasing the water level on the vehicle. Be Muddy waters can reduce the cooling system effec- sure to consider this when determining the depth and tiveness by depositing debris onto the radiator.
Page 361: Airing Down For Off-Road Driving
STARTING AND OPERATING 359 downstream out of control if the water is deep enough form to the ground contour. Different terrain, tires, and to push on the large surface area of the vehicle’s body. vehicles require different tire pressure. Hard surfaces like Before you proceed determine the speed of the current, rock and heavier vehicles require higher pressures than the water’s depth, approach angle, bottom condition...
Page 362: Vehicle Recovery
360 STARTING AND OPERATING Vehicle Recovery vehicle impingement on the surroundings, then using a If you drive off-road, you may encounter a situation tow strap to the vehicle tow hooks would be fast and where you will need to recover your vehicle. Vehicle easy.
Page 363 STARTING AND OPERATING 361 vehicle from DRIVE to REVERSE, while applying CAUTION! throttle after each shift. During this process, for addi- tional traction, try turning your steering wheel quickly Damage can occur when spinning your tires at an back and forth no more than a ⁄...
Page 364 362 STARTING AND OPERATING two tow straps together using a 1 ⁄ inch hard wood WARNING! dowel. This will keep the straps from becoming knot- ted and is safer than using a clevis pin if the strap Never use tow straps with end hooks or link two breaks.
Page 365: After Driving Off-Road
STARTING AND OPERATING 363 out of the situation in a slow controlled manner. This as you power the winch in. Be careful not to allow control works well for avoiding further vehicle dam- slack in the cable as you recover the vehicle. Do not try age.
Page 366 364 STARTING AND OPERATING • After extended operation in mud, sand, water, or always a good idea to check for damage. That way you can get any problems taken care of right away and have similar dirty conditions, have the radiator, fan, brake your vehicle ready when you need it.
Page 367: Limited-Slip Differential
STARTING AND OPERATING 365 LIMITED-SLIP DIFFERENTIAL WARNING! The limited-slip differential provides additional traction on snow, ice, mud, sand and gravel, particularly when On vehicles equipped with a limited-slip differential there is a difference between the traction characteristics never run the engine with one rear wheel off the of the surface under the right and left rear wheels.
Page 368: Traction
366 STARTING AND OPERATING erratically to the right or left. This phenomenon occurs 1. Slow down during rainstorms or when the roads are when there is a difference in the surface traction under slushy. the rear (driving) wheels. 2. Slow down if the road has standing water or puddles. WARNING! 3.
Page 369: Flowing/Rising Water
STARTING AND OPERATING 367 Flowing/Rising Water CAUTION! • Always check the depth of the standing water WARNING! before driving through it. Never drive through Do not drive on or across a road or path where water standing water that is deeper than the bottom of is flowing and/or rising (as in storm run-off).
Page 370 368 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
Page 371: Off-Road Driving Tips
STARTING AND OPERATING 369 OFF-ROAD DRIVING TIPS always a good idea to check for damage. That way you Care should be taken when attempting to climb steep can get any problems taken care of right away and have hills or driving diagonally across a hill or slope. If natural your vehicle ready when you need it.
Page 372: Winch Usage (Power Wagon Only) - If Equipped
370 STARTING AND OPERATING • After extended operation in mud, sand, water, or WINCH USAGE (POWER WAGON ONLY) — IF similar dirty conditions, have the radiator, fan, brake EQUIPPED rotors, wheels, brake linings, and axle yokes inspected Things To Know Before Using Your Winch and cleaned as soon as possible.
Page 373 STARTING AND OPERATING 371 2. Attach the hook to a suitable anchor point. Low Voltage Interrupt Your winch is equipped with a device that will interrupt CAUTION! winch function if the vehicle charging system voltage drops to a low level. The winch will not power-in or out Be certain the anchor will withstand the load re- for 30 seconds if this device is tripped.
Page 374: Understanding The Features Of Your Winch
372 STARTING AND OPERATING Understanding The Features Of Your Winch Winch Components...
Page 375 STARTING AND OPERATING 373 1. Motor: The winch motor is powered by the vehicle 6. Clutch Lever: The clutch lever allows the winch drum charging system and features a thermal protection switch to be disconnected from the winch motor to allow the that automatically stops motor function in the power-in wire rope to be pulled from the winch by hand.
Page 376: Winch Accessories
374 STARTING AND OPERATING Winch Accessories Snatch/Block Pulley: Used properly, the multi-purpose The following accessories are necessary to attach the snatch block allows you to (1) winch to anchors, change direction of pull, and for safe increase the winch’s pulling winching.
Page 377: Operating Your Winch
STARTING AND OPERATING 375 Clevis/D-Shackles: Operating Your Winch D-Shackle is a safe means of WARNING! connecting the looped ends of cables, straps and snatch Failure to observe any of these warnings regarding blocks. The shackle’s pin is proper winch usage may result in severe injury. threaded to allow easy re- •...
Page 378 376 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Always stand clear of wire rope and load and keep • Always disconnect the remote control when not in others away during winching. use. • Always keep hands and clothing clear of the wire •...
Page 379 STARTING AND OPERATING 377 General Information Vehicle Recovery Using The Winch Practice using your winch before you get stuck. Some key CAUTION! points to remember when using your winch are: • Always Know Your Winch: Take the time to fully 1.
Page 380 378 STARTING AND OPERATING 1. Inspect the winch, winch mount, and wire rope for CAUTION! (Continued) damage. Do not use the winch if the mount is loose or • Inspect for cracks, pinches, frayed wires, or loose rope shows excessive wear or damage. connections.
Page 381 STARTING AND OPERATING 379 4. Free the winch hook and attach the hook strap. Free the winch hook from its anchor point. Attach the hook strap to the hook (if not attached). Free Spool Hook Strap...
Page 382 380 STARTING AND OPERATING 5. Pull the wire to the anchor point. Pull out enough wire 6. Secure to the anchor point. Once you have established rope to reach your anchor point. Be sure to keep a certain your anchor point, secure the tree-trunk protector or amount of tension on the wire as it can become twisted choker-chain around the object.
Page 383 STARTING AND OPERATING 381 7. Attach the Clevis/D-shackle and Tree Trunk Protector. CAUTION! Attach the shackle to the two ends of the strap or chain and through the hook loop, being careful not to over Always be certain the anchor you select will with- tighten (tighten and back-off 1/2 turn).
Page 384 382 STARTING AND OPERATING NOTE: Always ensure the clutch is fully engaged or disengaged. 9. Connect the remote control to the winch control box, located behind the front bumper. Be careful not to let the remote control cord dangle in front of the winch. If you choose to control the winch from inside your vehicle, always pass the remote through a window to avoid pinching the cord in the door.
Page 385 STARTING AND OPERATING 383 12. Check wire rope. The wire rope should be neatly wound around the spooling drum. Improper winding can cause damage to the wire rope. 11. Check your anchor. Make sure all connections are secured and free of debris before continuing with the winching procedure.
Page 386 384 STARTING AND OPERATING 13. In certain situations you the vehicle and never near the wire rope or snatch may decide to throw a heavy block. Your situation may have other no people zones. blanket or similar object over the wire rope. A heavy blan- ket can absorb energy should the wire rope break.
Page 387 STARTING AND OPERATING 385 For additional assistance, the winched vehicle can be NOTE: • Avoid overheating the winch motor. For extended slowly driven while being pulled by the winch. Continue pulling until the vehicle is on stable ground. If you are winching, stop at reasonable intervals to allow the able to drive the vehicle, the winching operation is winch motor to cool down.
Page 388 386 STARTING AND OPERATING section of the rope and reposition it to the opposite end of the drum, which will free up space for continued winching. 16. Secure vehicle. Once recovery of the vehicle’s is complete, be sure to secure the vehicle’s brakes and put the transmission in PARK.
Page 389 STARTING AND OPERATING 387 Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope already on the spooling drum is wound tightly and evenly layered. Tighten and straighten the layer if necessary. Keep the wire rope under light tension and spool the wire rope back and onto the winch drum in even layers.
Page 390: Rigging Techniques
388 STARTING AND OPERATING Rigging Techniques How To Change The Pulling Direction Various winching situations will require application of other winching techniques. These could range from too little distance to achieve maximum pull using straight line rigging, simply increasing pulling power, or main- taining a straight-line pulling situation.
Page 391 STARTING AND OPERATING 389 will enable you to change your pulling direction while Double Line still allowing the wire rope to be at 90° to wind properly onto the spooling drum. Increasing Pulling Power In some cases, you may find yourself needing more pulling power.
Page 392: Power Steering
390 STARTING AND OPERATING vehicle’s frame/tow hook and run the wire rope through NOTE: • Increased noise levels at the end of the steering wheel a snatch block. Disengage the clutch and, using the snatch block, pull out enough wire to reach your anchor travel are considered normal and do not indicate that point.
Page 393: Power Steering Fluid Check
STARTING AND OPERATING 391 CAUTION! CAUTION! Prolonged operation of the steering system at the end Do not use chemical flushes in your power steering of the steering wheel travel will increase the steering system as the chemicals can damage your power fluid temperature and it should be avoided when steering components.
Page 394: Multi-Displacement System (Mds) (If Equipped) - 5.7L Engine Only
392 STARTING AND OPERATING If necessary, add fluid to restore to the proper indicated The foot operated parking brake is located below the level. With a clean cloth, wipe any spilled fluid from all lower left corner of the instrument panel. To apply the surfaces.
Page 395 STARTING AND OPERATING 393 When the parking brake is applied with the ignition make it difficult to move the shift lever out of PARK. The switch ON, the “Brake Warning Light” in the instrument parking brake should always be applied whenever the cluster will illuminate.
Page 396: Brake System
394 STARTING AND OPERATING BRAKE SYSTEM WARNING! (Continued) If power assist is lost for any reason (for example, • Be sure the parking brake is fully disengaged repeated brake applications with the engine off), the before driving; failure to do so can lead to brake brakes will still function.
Page 397: Electronic Brake Control System
STARTING AND OPERATING 395 NOTE: Under cold temperatures, pedal effort will be NOTE: ABS improves steering control of the vehicle higher than normal until the power steering fluid reaches during hard braking maneuvers. operating temperature. WARNING! ELECTRONIC BRAKE CONTROL SYSTEM •...
Page 398: Traction Control System (Tcs) - If Equipped
396 STARTING AND OPERATING Traction Control System (TCS) – If Equipped Brake Assist System (BAS) – If Equipped The TCS monitors the amount of wheel spin of each of The BAS is designed to optimize the vehicle’s braking the driven wheels. If wheel spin is detected, brake capability during emergency braking maneuvers.
Page 399: Hill Start Assist (Hsa) - If Equipped
STARTING AND OPERATING 397 level of brake pressure the driver inputs for a short WARNING! duration once the driver takes his foot off of the brake • The BAS cannot prevent the natural laws of phys- pedal. If the driver does not apply the throttle during this short duration, the system will release brake pressure ics from acting on the vehicle, nor can it increase and the vehicle will roll down the incline.
Page 400 398 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., The system will work in REVERSE and all forward gears, vehicle facing uphill is in forward gear; vehicle back- and will not activate if the vehicle is placed in ing uphill is in REVERSE gear).
Page 401 STARTING AND OPERATING 399 WARNING! WARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle • If you use a trailer brake controller with your on a hill without putting the transmission in trailer, your trailer brakes may be activated and PARK or using the parking brake, it will roll down deactivated with the brake switch.
Page 402: Electronic Stability Control (Esc) - If Equipped
400 STARTING AND OPERATING 3. With the engine running and the brake applied, rotate EVIC Equipped Vehicles the steering wheel 180° counterclockwise from center. HSA is a Customer Programmable Feature on a EVIC equipped vehicle. If you wish to turn off the HSA feature, 4.
Page 403 STARTING AND OPERATING 401 the intended path, ESC applies the brake of the appro- this mode. This mode should be used for almost all priate wheel to assist in counteracting the oversteer or driving situations. ESC should only be turned to “Partial understeer condition.
Page 404 402 STARTING AND OPERATING mode by pressing the “ESC Off” switch. Once the situa- All Four-Wheel Drive Vehicles In 4WD AUTO And tion requiring ESC to be switched to the “Partial Off” 4WD LOCK Modes Can Also Choose The mode is overcome, turn ESC back on by momentarily Following ESC Operating Mode.
Page 405: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 403 into the PARK position from any other position and then the transfer case (if equipped) is shifted from 4WD LOCK moved out of the PARK position. This will occur even if or NEUTRAL, to 4WD LOW, the ESC system will be in the message was previously cleared.
Page 406 404 STARTING AND OPERATING Light” comes on continuously with the engine running, a NOTE: • The “ESC Activation/Malfunction Indicator Light” malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the and the “ESC OFF Indicator Light” come on momen- vehicle has been driven several miles (kilometers) at tarily each time the ignition switch is turned ON.
Page 407: Trailer Sway Control (Tsc) - If Equipped
STARTING AND OPERATING 405 Trailer Sway Control (TSC) – If Equipped TSC is only active in the default “ESC On” mode. TSC The TSC system uses sensors in the vehicle to recognize can be disabled by pressing the “ESC Off” switch and an excessively swaying trailer and will take the appro- entering “ESC Partial Off”...
Page 408: Tire Safety Information
406 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 409 STARTING AND OPERATING 407 • High flotation tire sizing is based on U.S. design Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- standards and it begins with the tire diameter molded tion.
Page 410 408 STARTING AND OPERATING EXAMPLE: 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 411: Tire Identification Number (Tin)
STARTING AND OPERATING 409 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 412: Tire Terminology And Definitions
410 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 413: Tire Loading And Tire Pressure
STARTING AND OPERATING 411 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 414 412 STARTING AND OPERATING Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 415 STARTING AND OPERATING 413 available cargo and luggage load capacity is 650 lbs NOTE: • The following table shows examples on how to calcu- (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations 5.
Page 416 414 STARTING AND OPERATING...
Page 417: Tires - General Information
STARTING AND OPERATING 415 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 418: Tire Inflation Pressures
416 STARTING AND OPERATING Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side “B” Pillar or rear edge of the driver’s side hicle to the other can cause the vehicle to drift to door.
Page 419: Tire Pressures For High Speed Operation
STARTING AND OPERATING 417 Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the Winter.
Page 420: Radial Ply Tires
418 STARTING AND OPERATING loading may be required for high-speed vehicle opera- Radial Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly.
Page 421: Spare Tire Matching Original Equipped Tire And Wheel - If Equipped
STARTING AND OPERATING 419 Spare Tire Matching Original Equipped Tire And CAUTION! Wheel – If Equipped Your vehicle may be equivalent with a spare tire and Because of the reduced ground clearance, do not take wheel in look and function as the original equipment tire your vehicle through an automatic car wash with a and wheel found on the front or rear axle of your vehicle.
Page 422: Full Size Spare - If Equipped
420 STARTING AND OPERATING Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
Page 423: Tire Spinning
STARTING AND OPERATING 421 your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or ice conditions, do not first opportunity. spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without WARNING! stopping when you are stuck.
Page 424: Tread Wear Indicators
422 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
Page 425: Replacement Tires
STARTING AND OPERATING 423 Information” placard for the size designation of your tire. WARNING! The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall. See the Tires and the spare tire should be replaced after six Tire Sizing Chart example found in the Tire Safety years, regardless of the remaining tread.
Page 426: Supplemental Tire Pressure Information - If Equipped
424 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 427: Tire Chains
STARTING AND OPERATING 425 TIRE CHAINS CAUTION! Use “Class S” chains, or other traction aids that meet SAE Type “S” specifications. To avoid damage to your vehicle, tires or chains, observe the following precautions: Use “Class U” chains on 2500/3500 model trucks, or •...
Page 428 426 STARTING AND OPERATING • On 4x2 2500 model trucks, the use of class “U” snow CAUTION! (Continued) chains is permitted on the rear wheels only of trucks • Do not install tire chains on front wheels of 4x2 equipped with LT245/70R17E or LT265/70R17E tires. vehicles.
Page 429: Snow Tires
STARTING AND OPERATING 427 If you need snow tires, select tires equivalent in size and CAUTION! type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the Do not use tire chains on the front wheels of any safety and handling of your vehicle.
Page 430: Tire Rotation Recommendations
428 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “forward cross” Tires on the front and rear axles of vehicles operate at shown in the following diagram. This rotation pattern different loads and perform different steering, driving, does not apply to some directional tires that must not be and braking functions.
Page 431: Directional Tires - If Equipped
STARTING AND OPERATING 429 Directional Tires – If Equipped Dual Rear Wheels For the R/T package with 22” tires & wheels, tire rotation must be performed with consideration of the tire rotation direction. The recommended rotation pattern for direc- tional tires is shown below. Tire Rotation The tires used on dual wheel assemblies should be matched for wear to prevent overloading one tire in a set.
Page 432: Tire Pressure Monitor System (Tpms)
430 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) CAUTION! The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recom- 3500 Dual Rear Tires have only one approved direc- mended cold placard pressure. tion of rotation.
Page 433 STARTING AND OPERATING 431 The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low-pressure warning cold (parked for more than three hours) placard pressure limit for any reason, including low temperature effects of 30 psi (207 kPa).
Page 434 432 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance or to provide warning of a tire failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...
Page 435: Base System
STARTING AND OPERATING 433 • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a TPM sensor. The matching full size spare the tire.
Page 436 434 STARTING AND OPERATING turn off. The vehicle may need to be driven for up to 3. Accumulation of snow or ice around the wheels or 20 minutes above 15 mph (24 km/h) in order for the wheel housings. TPMS to receive this information. 4.
Page 437: Premium System - If Equipped
STARTING AND OPERATING 435 Premium System – If Equipped The TPMS consists of the following components: The Tire Pressure Monitor System (TPMS) uses wireless • Receiver module, technology with wheel rim mounted electronic sensors to • Four TPM sensors, monitor tire pressure levels. Sensors mounted to each wheel as part of the valve stem transmit tire pressure •...
Page 438 436 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The TPM Telltale Light will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the EVIC will display one or more low pressure messages (Left Front, Left Rear, Right Front, Right Rear) for three seconds and a graphic showing the pressure values of each tire with the low tire...
Page 439 STARTING AND OPERATING 437 turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. Check TPMS Warning If a system fault is detected, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid.
Page 440 438 STARTING AND OPERATING If the ignition switch is cycled, this sequence will repeat, Vehicles With Full Size Spare providing the system fault still exists. If the system fault 1. The matching full size spare wheel and tire assembly no longer exists, the TPM Telltale Light will no longer has a TPM sensor that can be monitored by the TPMS.
Page 441: Tire Pressure Monitor System (Tpms) Tire Light Load Inflation Switch Description (2500 Models) - If Equipped
STARTING AND OPERATING 439 Tire Pressure Monitor System (TPMS) Tire Light The TPMS tire light load inflation switch will allow the Load Inflation Switch Description (2500 Models) – driver to switch between the max load inflation pressure If Equipped (cold) low pressure warning threshold and the light load inflation pressure (cold) low pressure warning threshold WARNING! depending on the vehicle’s load condition.
Page 442 440 STARTING AND OPERATING load inflation switch LED is ON, the TPMS is using the Tire Light Load Inflation Switch Operation – If light load inflation pressure (cold) low inflation warning Equipped thresholds. • This vehicle may have different recommended tire pressure values between the front and rear tires as shown in both the Tire Loading Information Label and the Supplemental Tire Pressure Information Label.
Page 443 STARTING AND OPERATING 441 Tire Pressure Information label. The Supplemental Tire Pressure Information label is located on the rear face of the driver door opening. Use an accurate tire gauge to check the tire pressures when lowering all four tire pressures.
Page 444: General Information
442 STARTING AND OPERATING the rear face of the driver door. Using an accurate tire the max load inflation pressure (cold) values to switch pressure gauge, re-check the tire pressures for the light the TPMS system to the max load inflation pressure load inflation pressure (cold) value.
Page 445: Fuel Requirements
STARTING AND OPERATING 443 • This device may not cause harmful interference. use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these • This device must accept any interference received, engines. including interference that may cause undesired operation.
Page 446: Reformulated Gasoline
444 STARTING AND OPERATING as hard starting, stalling, and hesitations. If you experi- The manufacturer supports the use of reformulated gaso- ence these symptoms, try another brand of gasoline lines. Properly blended reformulated gasolines will pro- before considering service for the vehicle. vide excellent performance and durability for the engine and fuel system components.
Page 447: E-85 Usage In Non-Flex Fuel Vehicles
STARTING AND OPERATING 445 Problems that result from using gasoline containing To fix a Non-FFV vehicle inadvertently fueled once with Methanol or gasoline containing more than 10% Ethanol E-85 perform the following: are not the responsibility of the manufacturer and may •...
Page 448: Materials Added To Fuel
446 STARTING AND OPERATING of gasoline may not be indicated on the gasoline pump, Fuel System Cautions therefore, you should ask your gasoline retailer whether CAUTION! or not his/her gasoline contains MMT. It is even more important to look for gasolines without MMT in Canada, Follow these guidelines to maintain your vehicle’s because MMT can be used at levels higher than those performance:...
Page 449: Carbon Monoxide Warnings
STARTING AND OPERATING 447 Carbon Monoxide Warnings CAUTION! (Continued) • The use of fuel additives, which are now being WARNING! sold as octane enhancers are not recommended. Carbon monoxide (CO) in exhaust gases is deadly. Most of these products contain high concentra- Follow the precautions below to prevent carbon tions of methanol.
Page 450: Flexible Fuel (4.7L Engine Only) - If Equipped
448 STARTING AND OPERATING WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly. Until repaired, drive with all side windows fully open. FLEXIBLE FUEL (4.7L ENGINE ONLY) —...
Page 451: Ethanol Fuel (E-85)
STARTING AND OPERATING 449 WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Page 452: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
450 STARTING AND OPERATING • you do not add less than 5 gallons (19 Liters) when Selection Of Engine Oil For Flexible Fuel Vehicles refueling (E-85) And Gasoline Vehicles FFV vehicles operated on E-85 require specially formu- • you operate the vehicle immediately after refueling for lated engine oils.
Page 453: Cruising Range
STARTING AND OPERATING 451 NOTE: Use of the engine block heater (if equipped) is CAUTION! beneficial for E-85 startability when the ambient tempera- ture is less than 32°F (0°C). Replacing fuel system components with non-ethanol compatible components can damage your vehicle. Cruising Range Because E-85 fuel contains less energy per gallon/liter Maintenance...
Page 454: Adding Fuel
452 STARTING AND OPERATING ADDING FUEL NOTE: When removing the fuel filler cap, lay the cap The fuel filler cap (gas cap) is located behind the fuel tether in the hook, located on the fuel filler door. filler door, on the left side of the vehicle. Open the fuel CAUTION! door and remove the fuel cap by turning it counter- clockwise.
Page 455: Loose Fuel Filler Cap Message
STARTING AND OPERATING 453 • When the fuel nozzle “clicks” or shuts off, the fuel WARNING! tank is full. • Never have any smoking materials lit in or near Loose Fuel Filler Cap Message the vehicle when the gas cap is removed or the If the vehicle diagnostic system determines tank is being filled.
Page 456 454 STARTING AND OPERATING This label contains the month and year of manufacture, Gross Axle Weight Rating (GAWR) Gross Vehicle Weight Rating (GVWR), Gross Axle Weight The GAWR is the maximum permissible load on the front Rating (GAWR) front and rear, and Vehicle Identification and rear axles.
Page 457 STARTING AND OPERATING 455 Inflation Pressure The entire vehicle should first be weighed on a commer- This is the cold tire inflation pressure for your vehicle for cial scale to insure that the GVWR has not been exceeded. all loading conditions up to full GAWR. The weight on the front and rear of the vehicle should then be determined separately to be sure that the load is Curb Weight...
Page 458: Trailer Towing
456 STARTING AND OPERATING Common Towing Definitions CAUTION! The following trailer towing related definitions will assist you in understanding the following information: Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR. If you do, Gross Vehicle Weight Rating (GVWR) parts on your vehicle can break, or it can change the The GVWR is the total allowable weight of your vehicle.
Page 459 STARTING AND OPERATING 457 Gross Combination Weight Rating (GCWR) WARNING! The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition NOTE: The GCWR rating includes a 150 lbs (68 kg) can result if either rating is exceeded.
Page 460 458 STARTING AND OPERATING that typically provides adjustable friction associated with safety. The addition of a friction/hydraulic sway control the telescoping motion to dampen any unwanted trailer also dampens sway caused by traffic and crosswinds and swaying motions while traveling. contributes positively to tow vehicle and trailer stability.
Page 461 STARTING AND OPERATING 459 EXAMPLE — Without Weight-Distributing Hitch EXAMPLE — With Weight-Distributing Hitch (Correct) (Incorrect)
Page 462: Trailer Hitch Classification
460 STARTING AND OPERATING Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects to the hitch mounted over the rear axle in the truck bed. Trailer Hitch Classification The rear bumper is intended to tow trailers up to 5,000 lbs (2 268 kg) without added equipment or altera-...
Page 463: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 461 Weight Ratings)” for the website address that contains All trailer hitches should be professionally installed on the necessary information for your specific drivetrain. your vehicle. Trailer Hitch Classification Definitions Trailer Towing Weights (Maximum Trailer Weight Class Max.
Page 464: Trailer And Tongue Weight
462 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the GTW on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer.
Page 465: Towing Requirements
STARTING AND OPERATING 463 NOTE: Remember that everything put into or on the Towing Requirements trailer adds to the load on your vehicle. Also, additional To promote proper break-in of your new vehicle drive- factory-installed options or dealer-installed options must train components the following guidelines are recom- be considered as part of the total load on your vehicle.
Page 466 464 STARTING AND OPERATING WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the hook retainers of the vehicle hitch.
Page 467 STARTING AND OPERATING 465 • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 2. GTW Information” in “Starting and Operating” for the 3. GAWR proper inspection procedure. 4.
Page 468 466 STARTING AND OPERATING actuated brakes. When towing a trailer equipped with WARNING! a hydraulic surge actuated brake system, an electronic • Do not connect trailer brakes to your vehicle’s brake controller is not required. hydraulic brake lines. It can overload your brake •...
Page 469 STARTING AND OPERATING 467 NOTE: This module has been designed and verified for The user interface consists of the following: electric trailer brakes. To determine the type of brakes on GAIN/ Brake Output Power Display your trailer, check with your trailer manufacturer or Shows the current GAIN setting.
Page 470 468 STARTING AND OPERATING lever is activated while the brake is also applied, the GAIN Adjustment Buttons (+/-) greater of the two inputs determines the power sent to Pressing these buttons will adjust the brake control the trailer brakes. power output to the trailer brakes in 0.5 increments. The GAIN setting can be increased to a maximum of 10 or The trailer and the vehicle’s brake lamps will come on decreased to a minimum of 0 (no trailer braking).
Page 471 STARTING AND OPERATING 469 1. Make sure the trailer brakes are in good working Repeat Steps 5 and 6 until the GAIN setting is at a point condition, functioning normally, and properly adjusted. just below trailer wheel lockup. If towing a heavier See your trailer dealer if necessary.
Page 472 470 STARTING AND OPERATING NOTE: CAUTION! • An aftermarket controller may be available for use with trailers with air or electric-over-hydraulic trailer The ITBM module has been designed and verified brake systems. To determine the type of brakes on for electric trailer brakes. Connecting a trailer that is your trailer and the availability of controllers, check not compatible with the ITBM system may result in with your trailer manufacturer or dealer.
Page 473 STARTING AND OPERATING 471 NOTE: Do not cut or splice wiring into the vehicle’s wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Four-Pin Connector 1 —...
Page 474: Towing Tips
472 STARTING AND OPERATING WARNING! Any work done to the vehicle’s electrical system or wiring should be performed by a qualified automo- tive technician. If done improperly it may cause damage to the electrical system wiring and could result in serious or fatal injury. Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy...
Page 475 STARTING AND OPERATING 473 NOTE: Using “TOW/HAUL” mode or a lower gear Electronic Speed Control – If Equipped range while operating the vehicle under heavy operating − Do not use in hilly terrain or with heavy loads. conditions will improve performance and extend trans- mission life by reducing excessive shifting and heat build −...
Page 476: Snowplow
474 STARTING AND OPERATING − Air Conditioning CAUTION! Turn off temporarily. Using this vehicle for snowplow applications can SNOWPLOW cause damage to the vehicle. 1500 Models Only WARNING! NOTE: Do not use this model vehicle for snowplow applications. Attaching a snowplow to this vehicle could adversely affect performance of the airbag system in a collision.
Page 477 STARTING AND OPERATING 475 Builders Guide. See your authorized dealer, installer or Before Plowing snowplow manufacturer for this information. There are • Check the hydraulic system for leaks and proper fluid unique electrical systems that must be connected to level. properly assure operator safety and prevent overloading •...
Page 478 476 STARTING AND OPERATING 2. The total GVWR or the Front GAWR or the Rear if necessary at the beginning and end of the snowplow GAWR should never be exceeded. season. This will help prevent uneven tire wear. 3. Cargo capacity will be reduced by the addition of The blade should be lowered whenever the vehicle is options or passengers, etc.
Page 479 STARTING AND OPERATING 477 Operating Tips General Maintenance Under ideal snow plowing conditions, 20 mph (32 km/h) Snowplows should be maintained in accordance with the should be maximum operating speed. The operator plow manufacturer’s instructions. should be familiar with the area and surface to be Keep all snowplow electrical connections and battery cleaned.
Page 480: Recreational Towing (Behind Motorhome, Etc.)
478 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF The Two-Wheel Drive Four-Wheel Drive Models Ground Models See Instructions • Automatic transmission in PARK • Manual transmission in gear Flat Tow NONE NOT ALLOWED (NOT in NEUTRAL (N)
Page 481: Recreational Towing - Two-Wheel Drive Models
STARTING AND OPERATING 479 Recreational Towing – Two-Wheel Drive Models 6. Install a suitable clamping device, designed for tow- DO NOT flat tow this vehicle. Damage to the drivetrain ing, to secure the front wheels in the straight position. will result. CAUTION! Recreational towing (for two-wheel drive models) is •...
Page 482 480 STARTING AND OPERATING must be placed in gear (NOT in NEUTRAL) for recre- CAUTION! (Continued) ational towing. Refer to the following for the proper • Before recreational towing, perform the procedure transfer case NEUTRAL shifting procedure for your outlined under “Shifting Into NEUTRAL” to be vehicle.
Page 483 STARTING AND OPERATING 481 Shifting Into Neutral (N) – Manual Shift Transfer CAUTION! Case (If Equipped) Use the following procedure to prepare your vehicle for It is necessary to follow these steps to be certain that recreational towing. the transfer case is fully in Neutral (N) before recre- ational towing to prevent damage to internal parts.
Page 484 482 STARTING AND OPERATING 8. Release the brake pedal (and clutch pedal on manual 13. Remove the key fob from the ignition switch. transmissions) for five seconds and ensure that there is 14. Attach the vehicle to the tow vehicle using a suitable no vehicle movement.
Page 485 STARTING AND OPERATING 483 6. Shift the transfer case lever to the desired position. Shifting Into Neutral – Electronic Shift Transfer Case (If Equipped) NOTE: When shifting out of transfer case Neutral (N), Use the following procedure to prepare your vehicle for turning the engine OFF may be required to avoid gear recreational towing: clash.
Page 486 484 STARTING AND OPERATING light will blink while the shift is in progress. The light CAUTION! will stop blinking (stay on solid) when the shift to NEUTRAL is complete. It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL before recre- 7.
Page 487 STARTING AND OPERATING 485 • Steps 1 through 5 are requirements that must be met 14. Shift the transmission into PARK or place manual transmission in gear (not in Neutral). prior to pressing the NEUTRAL button, and must continue to be met until the shift has been completed. CAUTION! If any of these requirements are not met prior to pressing the NEUTRAL button or are no longer met...
Page 488 486 STARTING AND OPERATING Shifting Out Of Neutral – Electronic Shift Transfer 8. After the NEUTRAL button has been released, the Case (If Equipped) transfer case will shift to the position identified by the Use the following procedure to prepare your vehicle for selector switch.
Page 489 STARTING AND OPERATING 487 • The ignition switch must be in the ON/RUN position 15. Shift the transmission into gear, release the brake pedal (and clutch pedal on manual transmissions), and for a transfer case shift to take place and for the check that the vehicle operates normally.
Page 491 WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....491 Hoisting ......510 Jacking And Tire Changing .
Page 492 490 WHAT TO DO IN EMERGENCIES ▫ Two-Wheel Drive Models ....520 Towing A Disabled Vehicle ....518 ▫...
Page 493: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 491 HAZARD WARNING FLASHERS JACKING AND TIRE CHANGING The Hazard Warning flasher switch is located on the WARNING! upper switch bank just below the radio. • Do not attempt to change a tire on the side of the Press the switch to turn on the Hazard Warning flasher.
Page 494: Jack Location
492 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas.
Page 495 WHAT TO DO IN EMERGENCIES 493 Jack And Tools (1500 Series) Jack And Tools (2500/3500 Series)
Page 496 494 WHAT TO DO IN EMERGENCIES WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 497 WHAT TO DO IN EMERGENCIES 495 Folding Flap And Rolling Bag Tying Bag To Jack With Straps...
Page 498 496 WHAT TO DO IN EMERGENCIES Jack And Tools Tied Jack And Tools (1500 Series) 4. Place the jack and tools in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor, and then secure to the floor pan using the wing bolt.
Page 499: Removing The Spare Tire
WHAT TO DO IN EMERGENCIES 497 enough cable slack to allow you to pull it out from under the vehicle. When the spare is clear, tilt the retainer at the end of the cable and pull it through the center of the wheel. NOTE: Always stow the spare tire with the valve stem facing the ground.
Page 500: Preparations
498 WHAT TO DO IN EMERGENCIES It is recommended that you stow the flat or spare to 3. Set the parking brake. avoid tangling the loose cable. 4. Place the shift lever into PARK. On four-wheel drive NOTE: The winch mechanism is designed for use with vehicles, shift the transfer case to the 4L position.
Page 501: Instructions
WHAT TO DO IN EMERGENCIES 499 Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. help prevent personal injury or damage to your •...
Page 502 500 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. 2. Using the wheel wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground.
Page 503 WHAT TO DO IN EMERGENCIES 501 drive tube to the extension tube. Place the jack under the axle between the wheel and the shock bracket with the drive tubes extending to the rear. 4X4 Jacking Location Operate the jack using the jack drive tube and the wheel wrench.
Page 504 502 WHAT TO DO IN EMERGENCIES CAUTION! Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. • 2500/3500 Series Trucks For 2500/3500 4x2 series trucks, when changing a front wheel, place the bottle jack under the frame rail behind the wheel.
Page 505 WHAT TO DO IN EMERGENCIES 503 jack under the axle as close to the tire as possible with the drive tube to the extension tube. Place the jack under the drive tubes extending to the front. Connect the jack tube axle between the spring and the shock absorber with the extension and wheel wrench.
Page 506 504 WHAT TO DO IN EMERGENCIES 5. Remove the wheel nuts and pull the wheel off. On CAUTION! single rear-wheel (SRW) trucks, install the spare wheel and wheel nuts with the cone shaped end of the wheel Before raising the wheel off the ground, make sure nuts toward the wheel.
Page 507: Hub Caps/Wheel Covers - If Equipped
WHAT TO DO IN EMERGENCIES 505 Hub Caps/Wheel Covers — If Equipped WARNING! The hub caps must be removed before raising the vehicle off the ground. A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Al- For 2500/3500 single rear-wheel (SRW) models, use the ways stow the jack parts and the extra tire and wheel blade on the end of the lug wrench to pry the hub cap off.
Page 508: Wheel Nuts
506 WHAT TO DO IN EMERGENCIES nut bolt circle and strike the high side down with a CAUTION! rubber mallet. Be sure that the hub caps and wheel skins • Use a back-and-forth motion to remove the hub are firmly seated around the wheel. cap.
Page 509 WHAT TO DO IN EMERGENCIES 507 Disc Type Nut Stud Size Torque Torque Wheels Ft. Lbs. Newton Meters Cone 9/16-18 120-150 160-200 Flanged 9/16-18 130-160 190-220 8-Stud — Dual Rear Wheels Dual wheels are flat-mounted and center-piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the hex and the washer.
Page 510 508 WHAT TO DO IN EMERGENCIES Dual wheel models require a special heavy-duty lug nut These dual rear wheels should be tightened as follows: tightening adapter (included with the vehicle) to cor- rectly tighten the lug nuts. Also, when it is necessary to remove and install dual rear wheels, use a proper vehicle lifting device.
Page 511: To Stow The Flat Or Spare
WHAT TO DO IN EMERGENCIES 509 second time to verify that specific torque has been WARNING! achieved. Retighten to specifications at 100 miles (160 km) and after 500 miles (800 km). A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle.
Page 512: Hoisting
510 WHAT TO DO IN EMERGENCIES HOISTING NOTE: When using a portable battery booster pack A conventional floor jack may be used at the jacking follow the manufacturer’s operating instructions and locations. Refer to the graphics that show jacking loca- precautions.
Page 513 WHAT TO DO IN EMERGENCIES 511 NOTE: The positive battery post is covered with a WARNING! protective cap. Lift up on the cap to gain access to the • Take care to avoid the radiator cooling fan when- positive battery post. ever the hood is raised.
Page 514: Jump-Starting Procedure
512 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 515 WHAT TO DO IN EMERGENCIES 513 8. Disconnect the opposite end of the positive (+) jumper WARNING! cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the 9. Disconnect the positive (+) end of the jumper cable discharged battery.
Page 516: Freeing A Stuck Vehicle
514 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE CAUTION! If the vehicle becomes stuck in snow, sand or mud, it can • When “rocking” a stuck vehicle by moving be- often be moved by a rocking motion. Move the shift lever rhythmically between DRIVE and REVERSE while ap- tween DRIVE and REVERSE, do not spin the plying slight pressure to the accelerator.
Page 517: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 515 WARNING! WARNING! • Chains are not recommended for freeing a stuck Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or vehicle. Chains may break, causing serious injury even failure, of the axle and tires.
Page 518: Shift Lever Override
516 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use one of the following procedures to temporarily move the shift lever: Column Shifter — If Equipped 1.
Page 519: Center Console Shifter - If Equipped
WHAT TO DO IN EMERGENCIES 517 Center Console Shifter — If Equipped To access the override, carefully remove (using a flat- bladed screwdriver) the override access cover which is located on the right of the shift lever gate. 1. Firmly set the parking brake. 2.
Page 520 518 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. If the trans- mission and drivetrain are operable, disabled vehicles may also be towed as described under “Recreational Towing”...
Page 521: Towing Without The Ignition Key Fob
WHAT TO DO IN EMERGENCIES 519 Proper towing or lifting equipment is required to prevent CAUTION! damage to your vehicle. Use only tow bars and other • Do not attempt to use sling type equipment when equipment designed for the purpose, following equip- ment manufacturer’s instructions.
Page 522: Two-Wheel Drive Models
520 WHAT TO DO IN EMERGENCIES Two-Wheel Drive Models 15 miles (24 km), tow with the rear wheels OFF the The manufacturer recommends towing your vehicle with ground. Acceptable methods are to tow the vehicle on a all four wheels OFF the ground using a flatbed. flatbed, or with the rear wheels raised using a wheel lift or towing dolly.
Page 523 WHAT TO DO IN EMERGENCIES 521 CAUTION! • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when towing. • Failure to follow these towing methods could result in damage to the transmission and/or trans- fer case.
Page 525 Replacement Parts ..... 531 (Four-Wheel Drive) Models (Ram Trucks Only) ......539 Dealer Service .
Page 526 524 MAINTAINING YOUR VEHICLE ▫ Windshield Wiper Blades ....540 Replacement Bulbs ....570 ▫...
Page 527 MAINTAINING YOUR VEHICLE 525 ▫ Chassis ......583 Fluids, Lubricants And Genuine Parts ..582 ▫...
Page 528: Engine Compartment - 3.7L
526 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick (If Equipped) 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Engine Oil Fill 4 —...
Page 529: Engine Compartment - 4.7L
MAINTAINING YOUR VEHICLE 527 ENGINE COMPARTMENT — 4.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Engine Oil Fill 4 — Brake Fluid Reservoir 10 —...
Page 530: Engine Compartment - 5.7L
528 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick 8 — Integrated Power Module (Fuses) 3 — Engine Oil Fill 9 — Power Steering Fluid Reservoir 4 —...
Page 531: Onboard Diagnostic System (Obd Ii)
MAINTAINING YOUR VEHICLE 529 ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 532: Emissions Inspection And Maintenance Programs
530 MAINTAINING YOUR VEHICLE the SELECT button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently the vehicle is started.
Page 533: Replacement Parts
MAINTAINING YOUR VEHICLE 531 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Page 534: Maintenance Procedures
532 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES attempting any procedure yourself. The pages that follow contain the required maintenance services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
Page 535: Engine Oil
MAINTAINING YOUR VEHICLE 533 The best time to check the engine oil level is about five CAUTION! (Continued) minutes after a fully warmed up engine is shut off. • Your vehicle has been built with improved fluids Checking the oil while the vehicle is on level ground will that protect the performance and durability of improve the accuracy of the oil level readings.
Page 536 534 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change CAUTION! intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is Engine Oil Selection not covered by the New Vehicle Limited Warranty.
Page 537: Engine Oil Filter
MAINTAINING YOUR VEHICLE 535 Lubricants which do not have both the engine oil certi- Disposing Of Used Engine Oil And Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and ber should not be used.
Page 538: Engine Air Cleaner Filter
536 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter used to assure most efficient service. MOPAR engine air Refer to the “Maintenance Schedule” for the proper cleaner filters are a high quality filter and are maintenance intervals. recommended. Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery.
Page 539 MAINTAINING YOUR VEHICLE 537 WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep • It is essential when replacing the cables on the flame or sparks away from the battery. Do not use battery that the positive cable is attached to the a booster battery or any other booster source with positive post and the negative cable is attached to an output greater than 12 Volts.
Page 540: Air Conditioner Maintenance
538 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
Page 541: Front Driveshaft Lubrication - 2500/3500
Front Driveshaft Lubrication – 2500/3500 When performing other underhood services, the hood (Four-Wheel Drive) Models (Ram Trucks Only) latch, release mechanism and safety catch should be Lubricate the front driveshaft grease fitting at each oil cleaned and lubricated.
Page 542: Adding Washer Fluid
540 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Adding Washer Fluid Clean the rubber edges of the wiper blades and the The fluid reservoir is located under the hood and should windshield periodically with a sponge or soft cloth and a be checked for fluid level at regular intervals.
Page 543: Exhaust System
MAINTAINING YOUR VEHICLE 541 If you notice a change in the sound of the exhaust system; WARNING! or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; Commercially available windshield washer solvents have an authorized technician inspect the complete ex- are flammable.
Page 544 542 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 545 MAINTAINING YOUR VEHICLE 543 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 546: Cooling System
544 MAINTAINING YOUR VEHICLE Cooling System Check the coolant recovery bottle tubing for brittle rub- ber, cracking, tears, cuts and tightness of the connection WARNING! at the bottle and radiator. Inspect the entire system for leaks. You or others can be badly burned by hot coolant or With the engine at normal operating temperature (but steam from your radiator.
Page 547 MAINTAINING YOUR VEHICLE 545 Refer to the “Maintenance Schedule” for the proper CAUTION! (Continued) maintenance intervals. • Do not use water alone or alcohol-based engine Selection Of Coolant coolant (antifreeze) products. Do not use addi- Use only the manufacturer’s recommended engine cool- tional rust inhibitors or antirust products, as they ant (antifreeze).
Page 548 546 MAINTAINING YOUR VEHICLE • Mix a minimum solution of 50% HOAT engine coolant Adding Coolant Your vehicle has been built with an improved engine and distilled water. Use higher concentrations (not to coolant (antifreeze) that allows extended maintenance exceed 70%) if temperatures below 34°F ( 37°C) are intervals.
Page 549 MAINTAINING YOUR VEHICLE 547 Cooling System Pressure Cap WARNING! The cap must be fully tightened to prevent loss of engine • The warning words “DO NOT OPEN HOT” on coolant (antifreeze), and to ensure that the engine coolant (antifreeze) will return to the radiator from the coolant the cooling system pressure cap are a safety pre- recovery bottle.
Page 550 548 MAINTAINING YOUR VEHICLE rules for your community. To prevent ingestion by ani- mals or children do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately.
Page 551 MAINTAINING YOUR VEHICLE 549 of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle.
Page 552: Brake System
550 MAINTAINING YOUR VEHICLE • Do not overfill the coolant recovery bottle. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Check engine coolant (antifreeze) freeze point in the condenser clean, also.
Page 553 MAINTAINING YOUR VEHICLE 551 The brake master cylinder has a translucent plastic WARNING! reservoir. On the outboard side of the reservoir, there is a “MAX” dot and an “MIN” dot. The fluid level must be Riding the brakes can lead to brake failure and kept within these two dots.
Page 554 552 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • To avoid contamination from foreign matter or • Use only manufacturer’s recommended brake moisture, use only new brake fluid or fluid that fluid. Refer to “Fluids, Lubricants, and Genuine has been in a tightly closed container. Keep the Parts”...
Page 555: Rear Axle And 4X4 Front Driving Axle Fluid Level
MAINTAINING YOUR VEHICLE 553 axles. The fluid level should be 5/8 in (16 mm) below the WARNING! (Continued) fill hole on 9 1/4 in manufacturer’s rear axles. • Do not allow petroleum based fluid to contami- For all 2500/3500 Model axles, the fluid level should be nate the brake fluid.
Page 556: Transfer Case
554 MAINTAINING YOUR VEHICLE Limited-Slip Differentials Fluid Level Check This vehicle requires that 4 oz. (118 ml) MOPAR Limited This fluid level can be checked by removing the filler Slip Additive or equivalent be added to the gear lubri- plug. The fluid level should be to the bottom edge of the cant.
Page 557 MAINTAINING YOUR VEHICLE 555 Special Additives CAUTION! Automatic Transmission Fluid (ATF) is an engineered • Do not use chemical flushes in your transmission product and its performance may be impaired by supple- mental additives. Therefore, do not add any fluid addi- as the chemicals can damage your transmission tives to the transmission.
Page 558 556 MAINTAINING YOUR VEHICLE Fluid Level Check – 42RLE/545RFE 6. Remove the dipstick again and note the fluid level on Check the fluid level while the transmission is at normal both sides. The fluid level should be between the “HOT” operating temperature 82°C (180°F).
Page 559: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 557 NOTE: If the transmission is disassembled for any CAUTION! reason, the fluid and filter(s) should be changed. Be aware that if the fluid temperature is below 50°F It is important that proper lubricant is used in the (10°C) it may not register on the dipstick.
Page 560 558 MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your ve- resistance built into your vehicle. hicle in the shade using MOPAR Car Wash or equiva- What Causes Corrosion? lent, or a mild car wash soap and rinse the panels Corrosion is the result of deterioration or removal of...
Page 561 MAINTAINING YOUR VEHICLE 559 • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder which will •...
Page 562 560 MAINTAINING YOUR VEHICLE • Blot any remaining stain with a clean, damp towel. Wheel And Wheel Trim Care All wheels and wheel trim, especially aluminum and • For tough stains, apply MOPAR Total Clean or chrome-plated wheels should be cleaned regularly with a equivalent, or a mild soap solution to a clean, damp mild soap and water to prevent corrosion.
Page 563 MAINTAINING YOUR VEHICLE 561 MOPAR Total Clean or equivalent is specifically recom- Cleaning Headlights mended for leather upholstery. Your vehicle is equipped with plastic headlights and fog lights (if equipped) that are lighter and less susceptible to Your leather upholstery can be best preserved by regular stone breakage than glass headlights.
Page 564 562 MAINTAINING YOUR VEHICLE cleaner. Use caution when cleaning the inside rear win- Seat Belt Maintenance dow equipped with electric defrosters or the right rear Do not bleach, dye or clean the belts with chemical quarter window equipped with the radio antenna. Do solvents or abrasive cleaners.
Page 565 MAINTAINING YOUR VEHICLE 563 To help maintain the appearance of your Spray-On WARNING! Bedliner, the manufacturer recommends you periodically rinse all loose dirt from your truck bed and clean your Do not use silicon-based protection products to clean truck at least twice per year using the MOPAR your bedliner.
Page 566: Fuses
564 MAINTAINING YOUR VEHICLE to cover the metal exposed by the scratch is required. To repair a tear or gouge, follow the directions provided in the MOPAR Quick Repair Kit. FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the battery.
Page 567 MAINTAINING YOUR VEHICLE 565 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 30 Amp Diesel Powertrain 60 Amp Main Ignition Off Pink Control Module – If Yellow Draw (IOD) Fuse Equipped 20 Amp Trailer Tow 25 Amp Driver Door Node Blue Lamps/Park Lamps...
Page 568 566 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 20 Amp Front Washer Con- 20 Amp Hands Free Blue trol Yellow Module/Vanity Lamp/Universal 25 Amp Sunroof Module Garage Door Natural Opener Module 15 Amp Stop Switch Lamp 10 Amp Climate Control...
Page 569 MAINTAINING YOUR VEHICLE 567 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 20 Amp Back Up Camera 20 Amp Automatic Shut- Yellow (Domestic Only) Yellow down 3 20 Amp Power Seat 10 Amp Horns (Low/High) Yellow Module(s)/Audio –...
Page 570 568 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 15 Amp J1962 Diag Connec- 10 Amp Antilock Brakes/ Blue Stability Control System Module/ 10 Amp Airbag Module Stoplamp Switch 25 Amp All Door Lock 10 Amp Powertrain Control Natural...
Page 571: Vehicle Storage
MAINTAINING YOUR VEHICLE 569 • As an alternative to the above steps you may discon- CAUTION! (Continued) nect the negative cables from both batteries. • When replacing a blown fuse, it is important to • Any time you store your vehicle or keep it out of use only a fuse having the correct amperage rating.
Page 572: Replacement Bulbs
570 MAINTAINING YOUR VEHICLE (or check to see if the fuse is blown) to ensure that it is LIGHT BULBS – Exterior Bulb No. fully seated. When the IOD fuse is extracted, the Backup Lamp ......921 instrument cluster in the odometer window will dis- Center High Mounted Stop Lamp (CHMSL) .
Page 573: Bulb Replacement
MAINTAINING YOUR VEHICLE 571 BULB REPLACEMENT Dual Or Quad Headlamp/Front Park And Turn Signal — If Equipped 1. Open the hood. 2. Disconnect and isolate the negative battery cable. 3. Remove the four plastic push-in fasteners that secure the upper radiator seal to the grille support and both fender ledges.
Page 574 572 MAINTAINING YOUR VEHICLE 8. Reach through the access hole of the wheel house 10. Disconnect the wiring harness connectors from the splash shield and lift the slide lock upward far enough to bulb socket. disengage it from the lock post on the back of the front 11.
Page 575: Fog Lamps
MAINTAINING YOUR VEHICLE 573 Fog Lamps Rear Tail/Stop, Turn Signal And Backup Lamps 1. Reach under and behind the front bumper to access 1. Remove the two screws that pass through the bed the back of the front fog lamp housing. sheetmetal.
Page 576 574 MAINTAINING YOUR VEHICLE 2. Pull the outboard side of the lamp rearward far 3. Disconnect the wiring harness connectors from the enough to unsnap the two receptacles on the outboard bulb socket. side of the lamp housing from the two plastic snap post 4.
Page 577: Center High-Mounted Stoplamp (Chmsl) With Cargo Lamp
MAINTAINING YOUR VEHICLE 575 Center High-Mounted Stoplamp (CHMSL) With 2. Separate the connector holding the housing and wir- Cargo Lamp ing harness to the body. 1. Remove the two screws holding the housing/lens to the body as shown. 3. Turn the desired bulb socket ⁄...
Page 578: Cab Top Clearance Lamps - If Equipped
576 MAINTAINING YOUR VEHICLE • Outside Bulbs: Cargo Lamps 4. Pull the desired bulb straight from the socket. • Inside Bulb: Center High-Mounted Stop Lamp 5. Reverse the procedure for installation of bulbs and housing. Cab Top Clearance Lamps — If Equipped 1.
Page 579 MAINTAINING YOUR VEHICLE 577 2. Rotate the socket ⁄ turn and pull it from the lamp 3. Pull the bulb straight from it’s socket and replace. assembly.
Page 580: Rear Lamp Bar Id Marker (Dual Rear Wheels) - If Equipped
578 MAINTAINING YOUR VEHICLE Rear Lamp Bar ID Marker (Dual Rear Wheels) — If 2. Turn the socket ⁄ turn counterclockwise to access the Equipped bulb. 1. Loosen the two screws and the housing to gain access 3. Pull the bulb straight out from the socket. to the bulb sockets.
Page 581: Side Marker Lamps (Dual Rear Wheels) - If Equipped
MAINTAINING YOUR VEHICLE 579 Side Marker Lamps (Dual Rear Wheels) — If 1. Push rearward on the side marker lamp assembly. Equipped 2. Pull the entire assembly from the fender. 3. Turn the socket ⁄ turn counterclockwise and remove from assembly to access the bulb. 4.
Page 582: Fluid Capacities
580 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric Fuel (Approximate) 1500 Regular Cab Shortbed/Crew Quad Cab Models 26 Gallons 98 Liters 1500 Regular Cab Longbed/Crew Quad Cab Models (Optional) 32 Gallons 121 Liters 2500/3500 Shortbed Models 34 Gallons 129 Liters 2500/3500 Longbed Models 35 Gallons 132 Liters...
Page 583 MAINTAINING YOUR VEHICLE 581 U.S. Metric Cooling System 3.7L Engine (MOPAR Antifreeze/Coolant 5 Year/100,000 Mile 14 Quarts 13 Liters Formula or equivalent) 4.7L Engine (MOPAR Antifreeze/Coolant 5 Year/100,000 Mile 14 Quarts 13 Liters Formula or equivalent) 5.7L Engine — 1500 Models (MOPAR Antifreeze/Coolant 5 16 Quarts 15 Liters Year/100,000 Mile Formula or equivalent)
Page 584 582 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 585 MAINTAINING YOUR VEHICLE 583 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Transfer Case MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Transfer Case – BW44–44 Only MOPAR BW44–44 Transfer Case Fluid or equivalent.
Page 587 MAINTENANCE SCHEDULES CONTENTS ▫ Required Maintenance Intervals ..588 Maintenance Schedule ....586...
Page 588 586 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation conditions the oil change The Scheduled Maintenance services listed in this indicator message will illuminate. This means that ser- manual must be done at the times or mileages specified vice is required for your vehicle. Have your vehicle to protect your vehicle warranty and ensure the best serviced as soon as possible, within the next 500 miles vehicle performance and reliability.
Page 589 MAINTENANCE SCHEDULES 587 Your authorized dealer will reset the oil change indicator Once A Month message after completing the scheduled oil change. If a • Check tire pressure and look for unusual wear or scheduled oil change is performed by someone other damage.
Page 590 588 MAINTENANCE SCHEDULES The spark plugs located under the coils are a standard CAUTION! plug and must be changed every 48,000 miles (78 000 km). Failure to perform the required maintenance items may result in damage to the vehicle. The spark plugs located on the side of the engine are a premium plug and must be changed every 96,000 miles Required Maintenance Intervals (156 000 km).
Page 591 MAINTENANCE SCHEDULES 589 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 592 590 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 593 MAINTENANCE SCHEDULES 591 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 594 592 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). ❏...
Page 595 MAINTENANCE SCHEDULES 593 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏...
Page 596 594 MAINTENANCE SCHEDULES 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 597 MAINTENANCE SCHEDULES 595 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). ❏...
Page 598 596 MAINTENANCE SCHEDULES 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 599 MAINTENANCE SCHEDULES 597 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 600 598 MAINTENANCE SCHEDULES 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏...
Page 601 MAINTENANCE SCHEDULES 599 128,000 Miles (208,000 km) or 96 Months Maintenance Service 136,000 Miles (221,000 km) or Schedule 102 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 602 600 MAINTENANCE SCHEDULES 144,000 Miles (234,000 km) or 108 Months Maintenance Service 152,000 Miles (247,000 km) or Schedule 114 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 603 MAINTENANCE SCHEDULES 601 † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
Page 605: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Suggestions For Obtaining Service For Your Vehicle......605 Speech Impaired (TDD/TTY) .
Page 606 604 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 611 Department Of Transportation Uniform Tire Quality Grades ......611 ▫...
Page 607: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 605 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 608: Chrysler Group Llc Customer Center
606 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (866) 726–4636 •...
Page 609: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 607 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 610: Warranty Information
608 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 611: In Canada
IF YOU NEED CONSUMER ASSISTANCE 609 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department immedi- campaign.
Page 612 610 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles.
Page 613 IF YOU NEED CONSUMER ASSISTANCE 611 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 614 612 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 615 INDEX...
Page 616 614 INDEX Adding Engine Coolant (Antifreeze) ..546 Alarm System (Security Alarm) ....18 Adding Fuel ......452 Alarm, Panic .
Page 617 INDEX 615 Fluid and Filter Changes ....557 Brake Assist System ..... . 396 Fluid Level Check .
Page 618 616 INDEX Caps, Filler Child Seat ......68,74 Oil (Engine) ......534 Cigar Lighter .
Page 619 INDEX 617 Coolant Pressure Cap (Radiator Cap) ..547 Defroster, Rear Window ....180 Cooling System .
Page 620 618 INDEX Dual Rear Wheels ..... 429,507 Emergency, In Case of DVD Player (Video Entertainment System™) ..286 Freeing Vehicle When Stuck .
Page 621 INDEX 619 Oil Selection ..... 534,580 Flexible Fuel Vehicles Oil Synthetic ......535 Cruising Range .
Page 622 620 INDEX Four-Way Hazard Flasher ....491 Fuses ....... . 564 Freeing A Stuck Vehicle .
Page 623 INDEX 621 Gross Axle Weight Rating ....457 Heated Mirrors ..... . . 99,180 Gross Vehicle Weight Rating .
Page 624 622 INDEX Information Center, Vehicle ....227 Key, Sentry (Immobilizer) ....16 Inside Rearview Mirror .
Page 625 INDEX 623 Brake Assist Warning ....403 Instrument Cluster ....206,210 Brake Warning .
Page 626 624 INDEX Tires ......411 Memory Seat ......116 Locks .
Page 627 INDEX 625 Navigation System (Uconnect™ gps) ..147 Identification Logo ....534 New Vehicle Break-In Period ....81 Materials Added to .
Page 628 626 INDEX Parking Brake ......392 Power Steering Fluid ..... 583 Passing Light .
Page 629 INDEX 627 Reclining Rear Seats ..... . 110 Restraint, Head ......114 Recorder, Event Data .
Page 630 628 INDEX Extender ......52 Sentry Key Programming ....17 Front Seat .
Page 631 INDEX 629 Sliding Rear Window Wheel, Tilt ......131 Power ......181 Steering Wheel Audio Controls .
Page 632 630 INDEX Tip Start ......309 Radial ......418 Tire and Loading Information Placard .
Page 633 INDEX 631 Trailer Towing ......456 Transmitter Programming Cooling System Tips ....473 (Remote Keyless Entry) .
Page 634 632 INDEX Vehicle Loading ..... . 412,453 Wheel Nut Torque ..... . . 506 Vehicle Modifications/Alterations .
Page 635 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 636 Chrysler Group LLC 12D241-226-AG Seventh Edition Printed in U.S.A.

This manual is also suitable for:

Truck 2500 2011 Truck 1500 2011

RAM Truck 3500 2011 Owner's Manual

Table of Contents

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RAM Truck 3500 2011

Summary of Contents for RAM Truck 3500 2011