Table of Contents
Advertisement
Installation
Time/Date
Time
Year
Month
Date
Clock preset
To exit press
SYSTEM MENU
31
5
Select line "Language" with w or v and confirm with the u button.
6
Select line "Recording audio" and confirm with u.
7
Select "Language I" or "Language II" with w or v and confirm with ENTER/
OK.
8
To end, press SYSTEM-MENU.
Setting the time and date
If the display shows an incorrect time or "--:--", the time and date must be reset manu-
ally.
If a TV channel which transmits TXT/PDC (teletext/PDC) is stored under programme
number "P01", the time and date will automatically be taken from the TXT/PDC infor-
mation.
1
Press SYSTEM-MENU on the remote control. The menu bar appears.
2
Select "
3
Select "Installation" using w or v and confirm with u.
4
Select "Time/Date" using w or v and confirm with u.
5
Check if the time in "Time" is correct. If required, change the time with the num-
ber buttons 0..9 on your remote control.
6
Check "Year", "Month" and "Date" in the same way. To move between the fields,
use w or v.
20:00
2003
01
01
✘ Time/date is displayed incorrectly despite manual setting
01
✓ With "SMART CLOCK", time/date is transferred from the TV channel saved on
"P01" and automatically corrected.
You can either enter another TV channel for transferring the data or disable the
function.
In the line "Clock preset" select the relevant TV channel with t or u.
To disable, select "Off".
7
Check the displayed settings and confirm with ENTER/OK.
"Stored" will appear briefly on the screen.
8
To end, press SYSTEM-MENU.
" symbol with t or u.
Problem
Installing your DVD recorder
Advertisement
Table of Contents
