Table of Contents
Advertisement
11.
User preferences
TV shape
16:9
Black level shift
Off
Video shift
RGB attenuation
Video output
RGB + CVBS
User preferences
In this section you will learn how to set your user preferences on the DVD recorder.
The symbols have the following meanings:
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Press SYSTEM-MENU on the remote control. The menu bar appears.
3
Select "
4
Select the appropriate function with w or v and confirm with u.
5
Select the appropriate line using w or v and confirm with u.
6
Select the appropriate function using w or v or the setting with t or u.
7
Confirm the new setting by pressing ENTER/OK.
8
To close the menu item, press t.
Picture settings
You can choose the following features in this menu:
"TV shape"
The picture signal from your DVD Recorder can be set to match your TV screen.
n
"4:3 letterbox": for a "wide-screen" picture with black bars at the top and bottom
"4:3 panscan": for a full-height picture with the sides trimmed.
Picutre
"16:9" : for a wide-screen TV set (screen edge ratio 16:9)
"Black level shift"
Adapts the colour dynamics for NTSC playback
"Video shift"
Use this feature to adjust the position of the picture on your TV left or right using t, u
to suit your TV set.
"RGB attenuation"
Adjusts the brightness for recording when connected with RGB.
"Video output"
Use this setting when scart terminals are in use.
•) For RGB signals through the scart cable, select "RGB + CVBS".
•) For S-video signals through the scart cable, select "S-Video".
•) For CVBS signals through the scart cable, select "CVBS only".
Picture setting
Sound setting
Language setting
Additional settings
Disc settings
Recording settings
Installation
" using t or u and confirm with w.
62
Advertisement
Table of Contents
