Using A Satellite Receiver; Allocating A Decoder - Yamaha DRX-2 Owner's Manual

Hide thumbs Also See for DRX-2:
Table of Contents

Advertisement

25
Satellite receiver
If you are connecting a satellite receiver, please read the section on "Using a satellite
receiver".
Decoder
If you are connecting a decoder, you must install it as described in the next section.
✘ Sound may be distorted on some TV channels.
✓ If the sound is distorted on any of the stored TV channels or if there is no sound
at all, the wrong TV system may have been stored for the TV channel. Read
"Manual TV channel search" for information on how to change the TV system.

Using a satellite receiver

TV channels from a satellite receiver (connected to scart socket EXT 2 AUX-I/O) are
received on the DVD recorder on programme number "EXT2"
If necessary, use the MONITOR button to switch to the internal tuner.
Select programme number "EXT1" with 0 on the remote control and then select pro-
gramme number "EXT2" with w.
You should select the TV channels to be received by the satellite receiver directly on
the receiver itself.

Allocating a decoder

Some TV channels send coded TV signals that can only be viewed properly with a pur-
chased or rented decoder. You can connect such a decoder (descrambler) to your DVD
recorder. The following function automatically activates the connected decoder for the
TV channel you want to watch.
How do I allocate the decoder for Easy Link?
If your TV set supports "Easy Link" the decoder must be assigned to the relevant TV
channel on the TV set (see the operating instructions for your TV set). Settings can-
not then be made in this menu.
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Use the v and w buttons or the number buttons 0..9 on the remote control to
select the TV channel for which you want to use the decoder. If necessary, use the
MONITOR button to switch to the internal tuner.
4
Press the SYSTEM-MENU button on the remote control. The menu bar
appears.
5
Select "
" symbol with t or u.
6
Select "Installation" using w or v and confirm with u.
Tip
Problem
Question
Installing your DVD recorder

Advertisement

Table of Contents
loading

Table of Contents