Table of Contents
Advertisement
45
Recording without automatic
switch-off
1
Switch on the TV set and select the programme number for the DVD recorder.
2
Insert a disc on which the recording is to be made. This disc is then checked for
content and system. "READING" will appear on the display.
✘ Index display
✓ A DVD+RW disc has been inserted that already contains recordings. Use the v
or w button to select the point where the recording is to start.
✘ The message "EMPTYDISC" appears in the display
✓ The disc inserted is a blank DVD disc.
✘ A dialog box appears asking you whether you want to delete the
contents or eject the disc
✓ The disc inserted is a DVD+RW but its contents are not DVD video-compatible
(e.g. a data disc). Recordings on this disc can only be made if the entire disc is
first deleted with the REC S button.
✘ The message "Too many titles" appears on the screen if a record-
ing is to be made
✓ A disc may contain a maximum of 48 titles (including blank titles). Delete titles
or change the disc.
3
If necessary, use the MONITOR button on the remote control to switch to the
internal tuner in the DVD recorder.
4
Use CH+ or CH- to select the programme number (station name) you want to
record. This will appear on the display:
Programme numbers of the external inputs:
"EXT1" Scart socket at the back EXT 1 TO TV-I/O
"EXT2" Scart socket at the back EXT 2 AUX-I/O
"CAM1" Front SVHS/audio sockets S-VIDEO / left AUDIO right
"CAM1" Front video/audio sockets A/V S-VIDEO / left AUDIO right
Switching between the S-VIDEO and VIDEO sockets takes place auto-
matically. If both sockets are in use, the signal at the S-VIDEO socket has
priority.
"CAM2" Digital Video (i Link) front socket DV IN
5
To start recording, press REC S on the remote control or REC on the DVD
recorder.
If you want to start the recording at the end of the existing recordings, hold down
the REC S button until the message "SAFE REC" appears on the display.
For DVD+R discs each new recording is always added at the end of all previous
recordings as existing recordings cannot be overwritten.
This will, for example, appear in the display:
Insert chapter markers
During recording you can mark scenes so you can find them or hide them later.
During recording, press EDIT at the start point. "Inserting chapter marker"
appears on the TV screen. In the display, the number of the "CHAPTER" increases
by one.
For further information on titles and chapters, see the section on "Changing to
another title/chapter" in "Additional playback features".
Problem
Tip
Tip
Manual recording
Advertisement
Table of Contents
