Table of Contents
Advertisement
Virgin mode
TV shape
4:3 letterbox
4:3 panscan
16:9
Press OK to continue
Virgin mode
Country
Austria
Belgium
Denmark
Finland
France
Press OK to continue
Installation
Autom. search
Searching for TV channels
00 Channels found
Please wait
Autom. search
Autom. search complete
00 Channels found
Time
Year
Month
Date
To continue
Press OK
Installing your DVD recorder
7
Select the desired screen format position using w or v.
These settings will only be used if you insert a DVD that contains this information.
Which screen formats can I select?
"4:3 letterbox" for a "wide-screen" (cinema format) picture with black bars at the
"4:3 panscan"
"16:9"
8
Confirm with ENTER/OK.
9
Select the country of your residence with w or v.
If your country does not appear, select "Others".
Why do I have to select a country?
To call up the specific settings for the respective country, you must first install the
country.
0
Confirm with ENTER/OK.
A
After you connect the aerial (or cable TV, satellite receiver, etc.) to the DVD
recorder, press ENTER/OK.
The automatic TV channel search starts. "WAIT" will appear on the display.
✘ The DVD recorder cannot find any TV stations
✓ Select channel 1 on the TV set. Can you see the stored TV channel on the TV
set?
If not, check the cable connection from the aerial (aerial socket) to the DVD
recorder and to the TV set.
✓ Please have patience.
The DVD recorder searches the entire frequency range in order to find and save
the largest possible number of TV channels.
✓ If you have not connected an aerial, go through all the basic settings right to the
end and then, if you wish, start the automatic search (see "Automatic TV station
search").
B
When the automatic TV channel search is complete, "Autom.search complete"
will appear on the TV screen.
"Time", "Year", "Month", "Date" will then appear on the TV screen.
C
Check if the time in "Time" is correct.
D
If required, change the time with the number buttons 0..9 on your remote con-
trol.
E
Select the next line with v or w.
20:01
2003
F
Check if the displayed settings for "Year", "Month" and "Date" are correct.
01
01
G
When all information is correct, save by pressing ENTER/OK.
The initial installation is now complete.
Question
top and bottom.
for a full-height picture with the sides trimmed.
for a wide-screen TV set (screen edge ratio 16:9)
Question
Problem
24
Advertisement
Table of Contents
