Table of Contents
Advertisement
Time/date
Automatic
PBS Channel
Daylight Saving
Time Zone
To exit press
SYSTEM MENU
Installing your DVD recorder
Setting the time and date
automatically
This function uses the information sent via the local PBS channel to automatically set
the time/date. For this reason, you must enter the PBS channel that sends this addi-
tional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is
wrong, you must manually set the date/time (see section "Manually setting the time &
date").
1
Press SYSTEM-MENU on the remote control. The menu bar appears.
2
Select "
3
Select "Installation" using w or v and confirm with u.
4
Select "Time/date" using w or v and confirm with u.
5
Select "Automatic" with w or v and confirm with u.
6
Select the corresponding line with w or v.
Auto.
7
Select the channel which sends the time/date information in the line "PBS Chan-
Off
Auto.
nel" and confirm with ENTER/OK. The DVD Recorder will check whether or
not the information transfer is possible.
✘ "Clock not set, check channel" will appear on the TV screen
✓ No time/date data can be received from this TV channel.
Select a different channel or "Auto." in line "PBS Channel".
8
Select one of the following settings in line "Daylight Saving":
"On": The time set corresponds to summer time (summer time activated)
"Off": The time set corresponds to the winter time (summer time is off)
9
In the line "Time Zone", select your time zone if the PBS channel entered was for
a different time zone. This is the only way to set the time correctly, or, if neces-
sary, to correct it.
If you want to use the time zone of the PBS channel, select "Auto.".
0
Confirm the changes with ENTER/OK.
A
To end, press SYSTEM-MENU.
" symbol with t or u.
Problem
26
Advertisement
Table of Contents
