Table of Contents
Advertisement
6.
Playback
35
General notes on playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super) Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalised)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3 CD
You can operate the video recorder using the remote control or the buttons on the
front of the DVD recorder.
✘ The display will read "PIN"
✓ The child lock has been activated for the inserted disc. Read the sections on
"Child lock" and "Releasing a disc" in the chapter on "Access control (child
lock)".
✘ The menu on the screen is showing an "X"
✓ Some DVD discs can be manufactured so that certain steps are required before
the disc can be played, or so that only limited operation is possible during play-
back. When an "X" appears on the screen the selected feature is not possible.
✘ The screen is showing regional code information
✓ Since DVD films are not normally released in all parts of the world at the same
time, all DVD players have a specific regional code. Discs can be given a regional
code. If the regional codes differ between the player and the disc, playback is not
possible.
✓ The regional code is shown on the label on the back of the machine.
✓ The regional code does not apply to recordable DVD discs.
Inserting a disc
1
Press the F (Open/Close) button on the front. The disc tray will open. While
the disc tray is opening, "OPENING" and then "TRAY OPEN" when the tray is
fully open.
2
Carefully place the disc in the tray with the label facing up and press PLAY
F (Open/Close) "CLOSING" and then "READING" will appear in the display.
The information on the disc will be read.
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The labelling for
each side is in the centre of the disc. To play a side its label must be facing up.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP
shows "OPENING" or "CLOSING".
3
Playback starts automatically.
Problem
Question
Tip
button on the remote control until the dialog box
or
Playback
Advertisement
Table of Contents
