Table of Contents
Advertisement
Access control
Auto resume
67
Locking unlocked discs
To lock a disc that was formerly authorised follow the instructions below.
1
Insert a disc. Playback starts automatically. If the playback does not start automat-
ically, press PLAY
2
Press the STOP
"
Parental level control (DVD video
only)
Films on pre-recorded DVD discs may contain scenes not suitable for children. There-
fore, some discs may contain "Parental Control" rating information that applies to the
entire disc or to certain scenes on the disc.
The appropriate scenes have filter values that reach from 1-8. If such a scene is
detected during playback, the filter value set on the DVD recorder is compared to the
scene. If the filter value is higher than the setting, an alternative scene will be played (if
available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain scenes exceed the
rating you select, the entire disc will be blocked from viewing.
Activating/deactivating parental level control
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears.
4
Select the "
5
Select "
6
Confirm "Access control" using u.
7
Enter a 4-digit code of your choice. If the code is new, you may have to enter the
n
code a second time as confirmation.
Disc features
8
Select the "Parental level" using v or w and confirm with u. A bar appears to
Enter code . . .
On
select the parental level.
9
Select the appropriate rating using w, v or the number buttons 0..9.
What do the ratings mean?
Rating 0 (displayed as "--") parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene contains a higher level than the rating set?
If the recorder does not find a suitable alternative, playback will stop and you must
enter the four-digit code.
0
Confirm with ENTER/OK. Quit using t and SYSTEM-MENU.
.
button while the "
". The disc is now locked.
" icon using t or u.
(Disc features)" using w or v and confirm with u.
" icon is visible. The icon changes to
Tip
Access control (Child Lock)
Advertisement
Table of Contents
