Table of Contents
Advertisement
Digital output
Analogue output
Night mode
Playback audio
Recording audio
Subtitle
Menu
Country
63
Sound settings
Depending on which audio outputs are used, you can select the settings in this menu.
If you only use the analogue audio output (AUDIO L, R), select the settings "Off" in
the "Digital output" menu.
"Digital output"
For devices connected to the DIGITAL AUDIO OUT socket, you can select from
n
the following settings.
"All":
Sound
All
Stereo
Off
"PCM only": Dolby Digital and MPEG-2 multi-channel signals are converted to PCM
"Off":
"Analogue output"
For devices connected to the analogue audio output (AUDIO L, R), you can select
from the following settings.
"Stereo":
"Surround":
"Night mode"
Night mode optimises the sound for playback at low volume. You are therefore less
likely to disturb your neighbours. This only works for Dolby Digital audio on DVD
video discs.
Language settings
You can choose the following settings in this menu:
"Playback audio"
Playback audio language
n
"Recording audio"
Language
English
A choice between Language I and II
Language I
English
"Subtitle"
Einglish
Others
Subtitle language
"Menu"
Screen menu language
"Country"
Automatically displays names of broadcasters in your country
Unalterned signals of Dolby Digital and DTS are fed to the digital out-
put. MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers with digital multi-channel sound decod-
ers.
(Pulse Code Modulation).
For receivers/amplifiers without digital multi-channel sound
decoders.
Digital output switched off.
For devices with analogue audio input.
For devices without DolbySurround, use this setting if the DVD
recorder is only connected to a stereo TV set.
Dolby Digital and MPEG-2 multi-channel are mixed down to a DOLBY
surround-compatible two-channel output signal. For devices with
Dolby Surround Pro Logic decoder.
User preferences
Advertisement
Table of Contents
