Set Up A Client-To-Gateway Vpn - NETGEAR N300 User Manual

Set Up a Client-to-Gateway VPN

This section describes using the VPN Wizard to set up the VPN tunnel. If you want to
manually specify the settings, see

To configure a client-to-gateway VPN tunnel:
1. Select Advanced > Advanced - VPN > VPN Wizard.
2. Click Next.
3. Fill in the Connection Name and pre-shared key fields.
The connection name is for convenience and does not affect how the VPN tunnel
functions.
4. Select A remote VPN client (single computer) radio button and click Next.
The Summary screen displays:
Note: To view the VPNC-recommended authentication and encryption
settings used by the VPN Wizard, click the here link.
N300 Wireless ADSL2+ Modem Router DGN2200v4
Auto Policy Example
Virtual Private Networking
106
on page 112.