Ipv6 Pass Through; Ipv6 Fixed - NETGEAR N300 User Manual

3. Configure the remote 6to4 relay modem router settings by selecting one of the following
buttons:
• Auto. Your modem router uses any remote relay router that is available on the
Internet. This is the default setting.
• Static IP Address. Enter the static IPv4 address of the remote relay router. This
address is usually provided by your IPv6 ISP.
4. Specify how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN) by selecting one of the following radio buttons:
• Use DHCP Server. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
• Auto Config. This is the default setting.
5. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you
want to be used for the IPv6 address of the modem router's LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
6. Click the Apply button.

IPv6 Pass Through

In pass-through mode, the modem router works as a Layer 2 Ethernet switch with two ports
(LAN and WAN Ethernet ports) for IPv6 packets. The modem router does not process any
IPv6 header packets.

To set up a pass-through IPv6 Internet connection:
1. Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection Type list, select Pass Through.
The screen adjusts, but no additional fields display.
3. Click the Apply button.

IPv6 Fixed


To set up a pass-through IPv6 Internet connection:
1. Select Advanced > Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Fixed from the menu.
N300 Wireless ADSL2+ Modem Router DGN2200v4
Advanced Settings
97