Advanced Wireless Settings; Control The Wireless Radio - NETGEAR N300 User Manual

Advanced Wireless Settings

You can use this screen to turn on and off the wireless radio, to specify WPS settings, to use
AP mode, and to set up a wireless access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the modem
router. You can turn the wireless radio on or off in the Advanced Wireless Settings screen or
by using the WiFi On/Off button on the modem router front panel.When the wireless radio is
off, you can still use an Ethernet cable for a LAN connection to the modem router

To turn the wireless radio on or off:
1. Select Advanced > Advanced Setup > Wireless Settings.
By default, the Enable Wireless Router Radio check box is selected.
2. Select or clear the Enable Wireless Router Radio check box.
If you clear this check box, this turns off the WiFi feature of the wireless modem router.
3. (Optional) Select the Turn off wireless signal by schedule check box and fill in the fields
to specify the times when you do not need a wireless connection.
For instance, you could turn off the wireless signal for the weekend if you leave town.
4. Click Apply.
Your changes take effect.
N300 Wireless ADSL2+ Modem Router DGN2200v4
Advanced Settings
80