Set Up A Repeater - NETGEAR N300 User Manual

5. (Optional) Select the Disable Wireless Client Association check box to prevent wireless
clients from associating with the base station and allowing LAN client associations only.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the base stations.
6. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your modem router is the base station, it can function as the "parent" for up to four other
access points.
7. Click the Apply button.
Your changes are saved.

Set Up a Repeater

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
If you are using the modem router as the base station with a non-NETGEAR router as the
repeater, you might need to change more configuration settings. In particular, you should
disable the DHCP server function on the access point that is the repeater.

To configure the modem router as a repeater:
1. Log in to the modem router that will be the repeater.
2. Select Basic > Wireless Settings and verify that the wireless settings match the base unit
exactly.
The wireless security option has to be set to WEP or None.
3. Select Advanced > Wireless Repeating Function.
4. Select the Enable Wireless Repeating Function check box.
5. Select the Wireless Repeater radio button.
6. Fill in the Repeater IP Address field.
N300 Wireless ADSL2+ Modem Router DGN2200v4
Advanced Settings
86