Emerson VELOCE CF230ORB00 Owner's Manual page 10

How to Wire Your Ceiling Fan
SUPPLY BLACK
WIRE (HOT)
GROUND WIRE
GREEN GROUND
WIRE FROM
HANGER BALL
ANTENNA
GREEN GROUND
WIRE FROM
HANGER
BRACKET
Figure 16
5. After wire connections have been made, separate
the grounded white neutral and green wires on
one side of the outlet box from the ungrounded
black and blue wires on the other side of the outlet
box (Figure 17).
TO
120-
VOLT
SUPPLY
WHITE
(NEUTRAL)
Figure 17
SUPPLY WHITE WIRE
(NEUTRAL)
1-1/4" THREADED
STUD (2)
STANDARD ON-OFF
WALL SWITCH
BLACK
(HOT)
GROUND
TWO-CONDUCTOR
CABLE (WITH
GROUND)
GREEN WIRE (GROUND)
FROM HANGER BALL AND
HANGER BRACKET
RECEIVER WHITE
WIRE
RECEIVER
BLACK WIRE
FAN
BLACK
WIRE
FAN BLUE WIRE
FAN WHITE WIRE
RECEIVER WHITE WIRE
6. Carefully turn the wire connectors upward and
insert them up through the open side of the hanger
bracket and into the outlet box. Push the grounded
green and white wires into one side of the outlet
box; push the ungrounded black and blue wires
into the other side of the outlet box.
BLACK
BLACK (AC IN L)
WHITE
(AC IN)
WHITE
BLACK (TO
MOTOR L)
WHITE (TO MOTOR N)
BLUE (FOR LIGHT)
BLACK
BLUE
WHITE
HANGER BALL
10
(Standard) (cont.)
RECEIVER BLACK
WIRE
RECEIVER
BLUE WIRE
U.L. Model No.: CF230